diff mbox series

[v10,3/7] pinctrl: qcom: Update macro name to LPI specific

Message ID 1646737394-4740-4-git-send-email-quic_srivasam@quicinc.com (mailing list archive)
State Superseded
Headers show
Series Add pin control support for lpass sc7280 | expand

Commit Message

Srinivasa Rao Mandadapu March 8, 2022, 11:03 a.m. UTC
Update NO_SLEW macro to LPI_NO_SLEW macro as this driver lpi specific.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

Comments

Bjorn Andersson March 8, 2022, 5:46 p.m. UTC | #1
On Tue 08 Mar 03:03 PST 2022, Srinivasa Rao Mandadapu wrote:

> Update NO_SLEW macro to LPI_NO_SLEW macro as this driver lpi specific.
> 
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
> Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
> Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
> Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
>  drivers/pinctrl/qcom/pinctrl-lpass-lpi.c | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
> index 2f19ab4..3c15f80 100644
> --- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
> +++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
> @@ -40,7 +40,7 @@
>  #define LPI_GPIO_KEEPER			0x2
>  #define LPI_GPIO_PULL_UP		0x3
>  #define LPI_GPIO_DS_TO_VAL(v)		(v / 2 - 1)
> -#define NO_SLEW				-1
> +#define LPI_NO_SLEW				-1
>  
>  #define LPI_FUNCTION(fname)			                \
>  	[LPI_MUX_##fname] = {		                \
> @@ -193,14 +193,14 @@ static const struct lpi_pingroup sm8250_groups[] = {
>  	LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _),
>  	LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _),
>  	LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _),
> -	LPI_PINGROUP(6, NO_SLEW, dmic1_clk, i2s1_clk, _,  _),
> -	LPI_PINGROUP(7, NO_SLEW, dmic1_data, i2s1_ws, _, _),
> -	LPI_PINGROUP(8, NO_SLEW, dmic2_clk, i2s1_data, _, _),
> -	LPI_PINGROUP(9, NO_SLEW, dmic2_data, i2s1_data, _, _),
> +	LPI_PINGROUP(6, LPI_NO_SLEW, dmic1_clk, i2s1_clk, _,  _),
> +	LPI_PINGROUP(7, LPI_NO_SLEW, dmic1_data, i2s1_ws, _, _),
> +	LPI_PINGROUP(8, LPI_NO_SLEW, dmic2_clk, i2s1_data, _, _),
> +	LPI_PINGROUP(9, LPI_NO_SLEW, dmic2_data, i2s1_data, _, _),
>  	LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _),
>  	LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _),
> -	LPI_PINGROUP(12, NO_SLEW, dmic3_clk, i2s2_data, _, _),
> -	LPI_PINGROUP(13, NO_SLEW, dmic3_data, i2s2_data, _, _),
> +	LPI_PINGROUP(12, LPI_NO_SLEW, dmic3_clk, i2s2_data, _, _),
> +	LPI_PINGROUP(13, LPI_NO_SLEW, dmic3_data, i2s2_data, _, _),
>  };
>  
>  static const struct lpi_function sm8250_functions[] = {
> @@ -435,7 +435,7 @@ static int lpi_config_set(struct pinctrl_dev *pctldev, unsigned int group,
>  			}
>  
>  			slew_offset = g->slew_offset;
> -			if (slew_offset == NO_SLEW)
> +			if (slew_offset == LPI_NO_SLEW)
>  				break;
>  
>  			mutex_lock(&pctrl->slew_access_lock);
> -- 
> 2.7.4
>
diff mbox series

Patch

diff --git a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
index 2f19ab4..3c15f80 100644
--- a/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
+++ b/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
@@ -40,7 +40,7 @@ 
 #define LPI_GPIO_KEEPER			0x2
 #define LPI_GPIO_PULL_UP		0x3
 #define LPI_GPIO_DS_TO_VAL(v)		(v / 2 - 1)
-#define NO_SLEW				-1
+#define LPI_NO_SLEW				-1
 
 #define LPI_FUNCTION(fname)			                \
 	[LPI_MUX_##fname] = {		                \
@@ -193,14 +193,14 @@  static const struct lpi_pingroup sm8250_groups[] = {
 	LPI_PINGROUP(3, 8, swr_rx_clk, qua_mi2s_data, _, _),
 	LPI_PINGROUP(4, 10, swr_rx_data, qua_mi2s_data, _, _),
 	LPI_PINGROUP(5, 12, swr_tx_data, swr_rx_data, _, _),
-	LPI_PINGROUP(6, NO_SLEW, dmic1_clk, i2s1_clk, _,  _),
-	LPI_PINGROUP(7, NO_SLEW, dmic1_data, i2s1_ws, _, _),
-	LPI_PINGROUP(8, NO_SLEW, dmic2_clk, i2s1_data, _, _),
-	LPI_PINGROUP(9, NO_SLEW, dmic2_data, i2s1_data, _, _),
+	LPI_PINGROUP(6, LPI_NO_SLEW, dmic1_clk, i2s1_clk, _,  _),
+	LPI_PINGROUP(7, LPI_NO_SLEW, dmic1_data, i2s1_ws, _, _),
+	LPI_PINGROUP(8, LPI_NO_SLEW, dmic2_clk, i2s1_data, _, _),
+	LPI_PINGROUP(9, LPI_NO_SLEW, dmic2_data, i2s1_data, _, _),
 	LPI_PINGROUP(10, 16, i2s2_clk, wsa_swr_clk, _, _),
 	LPI_PINGROUP(11, 18, i2s2_ws, wsa_swr_data, _, _),
-	LPI_PINGROUP(12, NO_SLEW, dmic3_clk, i2s2_data, _, _),
-	LPI_PINGROUP(13, NO_SLEW, dmic3_data, i2s2_data, _, _),
+	LPI_PINGROUP(12, LPI_NO_SLEW, dmic3_clk, i2s2_data, _, _),
+	LPI_PINGROUP(13, LPI_NO_SLEW, dmic3_data, i2s2_data, _, _),
 };
 
 static const struct lpi_function sm8250_functions[] = {
@@ -435,7 +435,7 @@  static int lpi_config_set(struct pinctrl_dev *pctldev, unsigned int group,
 			}
 
 			slew_offset = g->slew_offset;
-			if (slew_offset == NO_SLEW)
+			if (slew_offset == LPI_NO_SLEW)
 				break;
 
 			mutex_lock(&pctrl->slew_access_lock);