| Message ID | 1650262991-21588-1-git-send-email-quic_mdalam@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [V4] mtd: rawnand: qcom: fix memory corruption that causes panic | expand |
On Mon, Apr 18, 2022 at 11:53:11AM +0530, Md Sadre Alam wrote: > This patch fixes a memory corruption that occurred in the > nand_scan() path for Hynix nand device. > > On boot, for Hynix nand device will panic at a weird place: > | Unable to handle kernel NULL pointer dereference at virtual > address 00000070 > | [00000070] *pgd=00000000 > | Internal error: Oops: 5 [#1] PREEMPT SMP ARM > | Modules linked in: > | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.0-01473-g13ae1769cfb0 > #38 > | Hardware name: Generic DT based system > | PC is at nandc_set_reg+0x8/0x1c > | LR is at qcom_nandc_command+0x20c/0x5d0 > | pc : [<c088b74c>] lr : [<c088d9c8>] psr: 00000113 > | sp : c14adc50 ip : c14ee208 fp : c0cc970c > | r10: 000000a3 r9 : 00000000 r8 : 00000040 > | r7 : c16f6a00 r6 : 00000090 r5 : 00000004 r4 :c14ee040 > | r3 : 00000000 r2 : 0000000b r1 : 00000000 r0 :c14ee040 > | Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none > | Control: 10c5387d Table: 8020406a DAC: 00000051 > | Register r0 information: slab kmalloc-2k start c14ee000 pointer offset > 64 size 2048 > | Process swapper/0 (pid: 1, stack limit = 0x(ptrval)) > | nandc_set_reg from qcom_nandc_command+0x20c/0x5d0 > | qcom_nandc_command from nand_readid_op+0x198/0x1e8 > | nand_readid_op from hynix_nand_has_valid_jedecid+0x30/0x78 > | hynix_nand_has_valid_jedecid from hynix_nand_init+0xb8/0x454 > | hynix_nand_init from nand_scan_with_ids+0xa30/0x14a8 > | nand_scan_with_ids from qcom_nandc_probe+0x648/0x7b0 > | qcom_nandc_probe from platform_probe+0x58/0xac > > The problem is that the nand_scan()'s qcom_nand_attach_chip callback > is updating the nandc->max_cwperpage from 1 to 4 or 8 based on page size. > This causes the sg_init_table of clear_bam_transaction() in the driver's > qcom_nandc_command() to memset much more than what was initially > allocated by alloc_bam_transaction(). > > This patch will update nandc->max_cwperpage 1 to 4 or 8 based on page > size in qcom_nand_attach_chip call back after freeing the previously > allocated memory for bam txn as per nandc->max_cwperpage = 1 and then > again allocating bam txn as per nandc->max_cwperpage = 4 or 8 based on > page size in qcom_nand_attach_chip call back itself. > > Cc: stable@vger.kernel.org > Fixes: 6a3cec64f18c ("mtd: rawnand: qcom: convert driver to nand_scan()") > Reported-by: Konrad Dybcio <konrad.dybcio@somainline.org> > Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com> > Signed-off-by: Sricharan R <quic_srichara@quicinc.com> I know that you and Sri were involved in creating this patch. So there should be a co-developed-by tag for Sri and your signed-off-by should be the last one. Like below, Cc: stable@vger.kernel.org Fixes: 6a3cec64f18c ("mtd: rawnand: qcom: convert driver to nand_scan()") Reported-by: Konrad Dybcio <konrad.dybcio@somainline.org> Co-developed-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com> With that, Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Thanks, Mani > --- > Changes in V4: > > * Incorporated "commit log wrong" comment from Mani > * Updated commit log > > Changes in V3: > > * Incorporated "Fixes tags are missing" comment from Miquèl > * Added Fixes tag Fixes:6a3cec64f18c ("mtd: rawnand: qcom: convert driver to nand_scan()") > * Incorporated "stable tag missing" comment from Miquèl > * Added stable tag Cc: stable@vger.kernel.org > * Incorporated "Reported-by tag missing" comment from Mani > * Added Reported-by tag Reported-by: Konrad Dybcio <konrad.dybcio@somainline.org> > > Changes in V2: > > * Incorporated "alloc_bam_transaction inside qcom_nand_attach_chip" suggestion from Mani > * Freed previously alloacted memory for bam txn before updating max_cwperpage inside > qcom_nand_attach_chip(). > * Moved alloc_bam_transaction() inside qcom_nand_attach_chip(). after upding max_cwperpage > 4 or 8 based on page size. > > drivers/mtd/nand/raw/qcom_nandc.c | 24 +++++++++++++----------- > 1 file changed, 13 insertions(+), 11 deletions(-) > > diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c > index 1a77542..048b255 100644 > --- a/drivers/mtd/nand/raw/qcom_nandc.c > +++ b/drivers/mtd/nand/raw/qcom_nandc.c > @@ -2651,10 +2651,23 @@ static int qcom_nand_attach_chip(struct nand_chip *chip) > ecc->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST; > > mtd_set_ooblayout(mtd, &qcom_nand_ooblayout_ops); > + /* Free the initially allocated BAM transaction for reading the ONFI params */ > + if (nandc->props->is_bam) > + free_bam_transaction(nandc); > > nandc->max_cwperpage = max_t(unsigned int, nandc->max_cwperpage, > cwperpage); > > + /* Now allocate the BAM transaction based on updated max_cwperpage */ > + if (nandc->props->is_bam) { > + nandc->bam_txn = alloc_bam_transaction(nandc); > + if (!nandc->bam_txn) { > + dev_err(nandc->dev, > + "failed to allocate bam transaction\n"); > + return -ENOMEM; > + } > + } > + > /* > * DATA_UD_BYTES varies based on whether the read/write command protects > * spare data with ECC too. We protect spare data by default, so we set > @@ -2955,17 +2968,6 @@ static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc, > if (ret) > return ret; > > - if (nandc->props->is_bam) { > - free_bam_transaction(nandc); > - nandc->bam_txn = alloc_bam_transaction(nandc); > - if (!nandc->bam_txn) { > - dev_err(nandc->dev, > - "failed to allocate bam transaction\n"); > - nand_cleanup(chip); > - return -ENOMEM; > - } > - } > - > ret = mtd_device_parse_register(mtd, probes, NULL, NULL, 0); > if (ret) > nand_cleanup(chip); > -- > 2.7.4 >
On 4/18/2022 12:06 PM, Manivannan Sadhasivam wrote: > On Mon, Apr 18, 2022 at 11:53:11AM +0530, Md Sadre Alam wrote: >> This patch fixes a memory corruption that occurred in the >> nand_scan() path for Hynix nand device. >> >> On boot, for Hynix nand device will panic at a weird place: >> | Unable to handle kernel NULL pointer dereference at virtual >> address 00000070 >> | [00000070] *pgd=00000000 >> | Internal error: Oops: 5 [#1] PREEMPT SMP ARM >> | Modules linked in: >> | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.0-01473-g13ae1769cfb0 >> #38 >> | Hardware name: Generic DT based system >> | PC is at nandc_set_reg+0x8/0x1c >> | LR is at qcom_nandc_command+0x20c/0x5d0 >> | pc : [<c088b74c>] lr : [<c088d9c8>] psr: 00000113 >> | sp : c14adc50 ip : c14ee208 fp : c0cc970c >> | r10: 000000a3 r9 : 00000000 r8 : 00000040 >> | r7 : c16f6a00 r6 : 00000090 r5 : 00000004 r4 :c14ee040 >> | r3 : 00000000 r2 : 0000000b r1 : 00000000 r0 :c14ee040 >> | Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none >> | Control: 10c5387d Table: 8020406a DAC: 00000051 >> | Register r0 information: slab kmalloc-2k start c14ee000 pointer offset >> 64 size 2048 >> | Process swapper/0 (pid: 1, stack limit = 0x(ptrval)) >> | nandc_set_reg from qcom_nandc_command+0x20c/0x5d0 >> | qcom_nandc_command from nand_readid_op+0x198/0x1e8 >> | nand_readid_op from hynix_nand_has_valid_jedecid+0x30/0x78 >> | hynix_nand_has_valid_jedecid from hynix_nand_init+0xb8/0x454 >> | hynix_nand_init from nand_scan_with_ids+0xa30/0x14a8 >> | nand_scan_with_ids from qcom_nandc_probe+0x648/0x7b0 >> | qcom_nandc_probe from platform_probe+0x58/0xac >> >> The problem is that the nand_scan()'s qcom_nand_attach_chip callback >> is updating the nandc->max_cwperpage from 1 to 4 or 8 based on page size. >> This causes the sg_init_table of clear_bam_transaction() in the driver's >> qcom_nandc_command() to memset much more than what was initially >> allocated by alloc_bam_transaction(). >> >> This patch will update nandc->max_cwperpage 1 to 4 or 8 based on page >> size in qcom_nand_attach_chip call back after freeing the previously >> allocated memory for bam txn as per nandc->max_cwperpage = 1 and then >> again allocating bam txn as per nandc->max_cwperpage = 4 or 8 based on >> page size in qcom_nand_attach_chip call back itself. >> >> Cc: stable@vger.kernel.org >> Fixes: 6a3cec64f18c ("mtd: rawnand: qcom: convert driver to nand_scan()") >> Reported-by: Konrad Dybcio <konrad.dybcio@somainline.org> >> Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com> >> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> > I know that you and Sri were involved in creating this patch. So there should > be a co-developed-by tag for Sri and your signed-off-by should be the last one. > Like below, Updated in V5 patch. > > Cc: stable@vger.kernel.org > Fixes: 6a3cec64f18c ("mtd: rawnand: qcom: convert driver to nand_scan()") > Reported-by: Konrad Dybcio <konrad.dybcio@somainline.org> > Co-developed-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Sricharan R <quic_srichara@quicinc.com> > Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com> > > With that, > > Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Updated in V5 patch. > > Thanks, > Mani > >> --- >> Changes in V4: >> >> * Incorporated "commit log wrong" comment from Mani >> * Updated commit log >> >> Changes in V3: >> >> * Incorporated "Fixes tags are missing" comment from Miquèl >> * Added Fixes tag Fixes:6a3cec64f18c ("mtd: rawnand: qcom: convert driver to nand_scan()") >> * Incorporated "stable tag missing" comment from Miquèl >> * Added stable tag Cc: stable@vger.kernel.org >> * Incorporated "Reported-by tag missing" comment from Mani >> * Added Reported-by tag Reported-by: Konrad Dybcio <konrad.dybcio@somainline.org> >> >> Changes in V2: >> >> * Incorporated "alloc_bam_transaction inside qcom_nand_attach_chip" suggestion from Mani >> * Freed previously alloacted memory for bam txn before updating max_cwperpage inside >> qcom_nand_attach_chip(). >> * Moved alloc_bam_transaction() inside qcom_nand_attach_chip(). after upding max_cwperpage >> 4 or 8 based on page size. >> >> drivers/mtd/nand/raw/qcom_nandc.c | 24 +++++++++++++----------- >> 1 file changed, 13 insertions(+), 11 deletions(-) >> >> diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c >> index 1a77542..048b255 100644 >> --- a/drivers/mtd/nand/raw/qcom_nandc.c >> +++ b/drivers/mtd/nand/raw/qcom_nandc.c >> @@ -2651,10 +2651,23 @@ static int qcom_nand_attach_chip(struct nand_chip *chip) >> ecc->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST; >> >> mtd_set_ooblayout(mtd, &qcom_nand_ooblayout_ops); >> + /* Free the initially allocated BAM transaction for reading the ONFI params */ >> + if (nandc->props->is_bam) >> + free_bam_transaction(nandc); >> >> nandc->max_cwperpage = max_t(unsigned int, nandc->max_cwperpage, >> cwperpage); >> >> + /* Now allocate the BAM transaction based on updated max_cwperpage */ >> + if (nandc->props->is_bam) { >> + nandc->bam_txn = alloc_bam_transaction(nandc); >> + if (!nandc->bam_txn) { >> + dev_err(nandc->dev, >> + "failed to allocate bam transaction\n"); >> + return -ENOMEM; >> + } >> + } >> + >> /* >> * DATA_UD_BYTES varies based on whether the read/write command protects >> * spare data with ECC too. We protect spare data by default, so we set >> @@ -2955,17 +2968,6 @@ static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc, >> if (ret) >> return ret; >> >> - if (nandc->props->is_bam) { >> - free_bam_transaction(nandc); >> - nandc->bam_txn = alloc_bam_transaction(nandc); >> - if (!nandc->bam_txn) { >> - dev_err(nandc->dev, >> - "failed to allocate bam transaction\n"); >> - nand_cleanup(chip); >> - return -ENOMEM; >> - } >> - } >> - >> ret = mtd_device_parse_register(mtd, probes, NULL, NULL, 0); >> if (ret) >> nand_cleanup(chip); >> -- >> 2.7.4 >>
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c index 1a77542..048b255 100644 --- a/drivers/mtd/nand/raw/qcom_nandc.c +++ b/drivers/mtd/nand/raw/qcom_nandc.c @@ -2651,10 +2651,23 @@ static int qcom_nand_attach_chip(struct nand_chip *chip) ecc->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST; mtd_set_ooblayout(mtd, &qcom_nand_ooblayout_ops); + /* Free the initially allocated BAM transaction for reading the ONFI params */ + if (nandc->props->is_bam) + free_bam_transaction(nandc); nandc->max_cwperpage = max_t(unsigned int, nandc->max_cwperpage, cwperpage); + /* Now allocate the BAM transaction based on updated max_cwperpage */ + if (nandc->props->is_bam) { + nandc->bam_txn = alloc_bam_transaction(nandc); + if (!nandc->bam_txn) { + dev_err(nandc->dev, + "failed to allocate bam transaction\n"); + return -ENOMEM; + } + } + /* * DATA_UD_BYTES varies based on whether the read/write command protects * spare data with ECC too. We protect spare data by default, so we set @@ -2955,17 +2968,6 @@ static int qcom_nand_host_init_and_register(struct qcom_nand_controller *nandc, if (ret) return ret; - if (nandc->props->is_bam) { - free_bam_transaction(nandc); - nandc->bam_txn = alloc_bam_transaction(nandc); - if (!nandc->bam_txn) { - dev_err(nandc->dev, - "failed to allocate bam transaction\n"); - nand_cleanup(chip); - return -ENOMEM; - } - } - ret = mtd_device_parse_register(mtd, probes, NULL, NULL, 0); if (ret) nand_cleanup(chip);
This patch fixes a memory corruption that occurred in the nand_scan() path for Hynix nand device. On boot, for Hynix nand device will panic at a weird place: | Unable to handle kernel NULL pointer dereference at virtual address 00000070 | [00000070] *pgd=00000000 | Internal error: Oops: 5 [#1] PREEMPT SMP ARM | Modules linked in: | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.0-01473-g13ae1769cfb0 #38 | Hardware name: Generic DT based system | PC is at nandc_set_reg+0x8/0x1c | LR is at qcom_nandc_command+0x20c/0x5d0 | pc : [<c088b74c>] lr : [<c088d9c8>] psr: 00000113 | sp : c14adc50 ip : c14ee208 fp : c0cc970c | r10: 000000a3 r9 : 00000000 r8 : 00000040 | r7 : c16f6a00 r6 : 00000090 r5 : 00000004 r4 :c14ee040 | r3 : 00000000 r2 : 0000000b r1 : 00000000 r0 :c14ee040 | Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none | Control: 10c5387d Table: 8020406a DAC: 00000051 | Register r0 information: slab kmalloc-2k start c14ee000 pointer offset 64 size 2048 | Process swapper/0 (pid: 1, stack limit = 0x(ptrval)) | nandc_set_reg from qcom_nandc_command+0x20c/0x5d0 | qcom_nandc_command from nand_readid_op+0x198/0x1e8 | nand_readid_op from hynix_nand_has_valid_jedecid+0x30/0x78 | hynix_nand_has_valid_jedecid from hynix_nand_init+0xb8/0x454 | hynix_nand_init from nand_scan_with_ids+0xa30/0x14a8 | nand_scan_with_ids from qcom_nandc_probe+0x648/0x7b0 | qcom_nandc_probe from platform_probe+0x58/0xac The problem is that the nand_scan()'s qcom_nand_attach_chip callback is updating the nandc->max_cwperpage from 1 to 4 or 8 based on page size. This causes the sg_init_table of clear_bam_transaction() in the driver's qcom_nandc_command() to memset much more than what was initially allocated by alloc_bam_transaction(). This patch will update nandc->max_cwperpage 1 to 4 or 8 based on page size in qcom_nand_attach_chip call back after freeing the previously allocated memory for bam txn as per nandc->max_cwperpage = 1 and then again allocating bam txn as per nandc->max_cwperpage = 4 or 8 based on page size in qcom_nand_attach_chip call back itself. Cc: stable@vger.kernel.org Fixes: 6a3cec64f18c ("mtd: rawnand: qcom: convert driver to nand_scan()") Reported-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> --- Changes in V4: * Incorporated "commit log wrong" comment from Mani * Updated commit log Changes in V3: * Incorporated "Fixes tags are missing" comment from Miquèl * Added Fixes tag Fixes:6a3cec64f18c ("mtd: rawnand: qcom: convert driver to nand_scan()") * Incorporated "stable tag missing" comment from Miquèl * Added stable tag Cc: stable@vger.kernel.org * Incorporated "Reported-by tag missing" comment from Mani * Added Reported-by tag Reported-by: Konrad Dybcio <konrad.dybcio@somainline.org> Changes in V2: * Incorporated "alloc_bam_transaction inside qcom_nand_attach_chip" suggestion from Mani * Freed previously alloacted memory for bam txn before updating max_cwperpage inside qcom_nand_attach_chip(). * Moved alloc_bam_transaction() inside qcom_nand_attach_chip(). after upding max_cwperpage 4 or 8 based on page size. drivers/mtd/nand/raw/qcom_nandc.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-)