Message ID | 1650291252-30398-5-git-send-email-quic_srivasam@quicinc.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | Add soundcard support for sc7280 based platforms. | expand |
On Mon, Apr 18, 2022 at 07:44:12PM +0530, Srinivasa Rao Mandadapu wrote: > Add dt nodes for sound card support, which is using WCD938x headset > playback, capture, I2S speaker playback and DMICs via VA macro. > > Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> > Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com> > Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com> > --- > arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 23 ++++++++ > arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 93 ++++++++++++++++++++++++++++++ > 2 files changed, 116 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts > index aa0bf6e2..bf15bbe 100644 > --- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts > +++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts > @@ -87,6 +87,29 @@ ap_ts_pen_1v8: &i2c13 { > pins = "gpio51"; > }; > > +&sound { > + audio-routing = > + "IN1_HPHL", "HPHL_OUT", > + "IN2_HPHR", "HPHR_OUT", > + "AMIC1", "MIC BIAS1", > + "AMIC2", "MIC BIAS2", > + "VA DMIC0", "MIC BIAS1", > + "VA DMIC1", "MIC BIAS1", > + "VA DMIC2", "MIC BIAS3", > + "VA DMIC3", "MIC BIAS3", > + "TX SWR_ADC0", "ADC1_OUTPUT", > + "TX SWR_ADC1", "ADC2_OUTPUT", > + "TX SWR_ADC2", "ADC3_OUTPUT", > + "TX SWR_DMIC0", "DMIC1_OUTPUT", > + "TX SWR_DMIC1", "DMIC2_OUTPUT", > + "TX SWR_DMIC2", "DMIC3_OUTPUT", > + "TX SWR_DMIC3", "DMIC4_OUTPUT", > + "TX SWR_DMIC4", "DMIC5_OUTPUT", > + "TX SWR_DMIC5", "DMIC6_OUTPUT", > + "TX SWR_DMIC6", "DMIC7_OUTPUT", > + "TX SWR_DMIC7", "DMIC8_OUTPUT"; > +}; Should this also be added to sc7280-herobrine-crd.dts? > + > &wcd938x { > pinctrl-names = "default"; > pinctrl-0 = <&us_euro_hs_sel>; > diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi > index e880837..640b1338 100644 > --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi > +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi > @@ -85,6 +85,99 @@ > pinctrl-names = "default"; > pinctrl-0 = <&nvme_pwren>; > }; > + > + sound: sound { > + compatible = "google,sc7280-herobrine"; > + model = "sc7280-wcd938x-max98360a-1mic"; > + > + audio-routing = > + "IN1_HPHL", "HPHL_OUT", > + "IN2_HPHR", "HPHR_OUT", > + "AMIC1", "MIC BIAS1", > + "AMIC2", "MIC BIAS2", > + "VA DMIC0", "MIC BIAS3", > + "VA DMIC1", "MIC BIAS3", > + "VA DMIC2", "MIC BIAS1", > + "VA DMIC3", "MIC BIAS1", > + "TX SWR_ADC0", "ADC1_OUTPUT", > + "TX SWR_ADC1", "ADC2_OUTPUT", > + "TX SWR_ADC2", "ADC3_OUTPUT", > + "TX SWR_DMIC0", "DMIC1_OUTPUT", > + "TX SWR_DMIC1", "DMIC2_OUTPUT", > + "TX SWR_DMIC2", "DMIC3_OUTPUT", > + "TX SWR_DMIC3", "DMIC4_OUTPUT", > + "TX SWR_DMIC4", "DMIC5_OUTPUT", > + "TX SWR_DMIC5", "DMIC6_OUTPUT", > + "TX SWR_DMIC6", "DMIC7_OUTPUT", > + "TX SWR_DMIC7", "DMIC8_OUTPUT"; > + > + qcom,msm-mbhc-hphl-swh = <1>; > + qcom,msm-mbhc-gnd-swh = <1>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + #sound-dai-cells = <0>; > + > + dai-link@1 { The '@1' is the address of the lpass CPU DAI, which doesn't seem correct here. As I brought up on v7 [1] I think this value isn't even necessarily unique, a SoC could have multiple IP blocks with audio buses, each with their own DAI address space. The binding (currently) requires an 'address'/id, rather than using the CPU DAI id I suggest to enumerate the links linearly, starting with 0. [1] https://patchwork.kernel.org/project/linux-arm-msm/patch/1649863277-31615-5-git-send-email-quic_srivasam@quicinc.com/ > + link-name = "MAX98360A"; The binding requires a 'reg' property, even though it isn't used (also discussed on v7). I think the 'reg' property should be removed from the binding and the DTs that use it, but maybe that should be done in a separate series. In the meantime the value should match that of the node. > + > + cpu { > + sound-dai = <&lpass_cpu MI2S_SECONDARY>; > + }; > + > + codec { > + sound-dai = <&max98360a>; > + }; > + }; > + > + dai-link@5 { > + link-name = "DisplayPort"; > + > + cpu { > + sound-dai = <&lpass_cpu LPASS_DP_RX>; > + }; > + > + codec { > + sound-dai = <&mdss_dp>; > + }; > + }; > + > + dai-link@6 { > + link-name = "WCD9385 Playback"; > + > + cpu { > + sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>; > + }; > + > + codec { > + sound-dai = <&wcd938x 0>, <&swr0 0>, <&lpass_rx_macro 0>; > + }; > + }; > + > + dai-link@19 { > + link-name = "WCD9385 Capture"; > + > + cpu { > + sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>; > + }; > + > + codec { > + sound-dai = <&wcd938x 1>, <&swr1 0>, <&lpass_tx_macro 0>; > + }; > + }; > + > + dai-link@25 { > + link-name = "DMIC"; > + > + cpu { > + sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>; > + }; > + > + codec { > + sound-dai = <&lpass_va_macro 0>; > + }; > + }; > + }; > }; > > &apps_rsc { > -- > 2.7.4 >
On 4/18/2022 11:32 PM, Matthias Kaehlcke wrote: Thanks for your time Matthias!!! > On Mon, Apr 18, 2022 at 07:44:12PM +0530, Srinivasa Rao Mandadapu wrote: >> Add dt nodes for sound card support, which is using WCD938x headset >> playback, capture, I2S speaker playback and DMICs via VA macro. >> >> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> >> Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com> >> Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com> >> --- >> arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 23 ++++++++ >> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 93 ++++++++++++++++++++++++++++++ >> 2 files changed, 116 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts >> index aa0bf6e2..bf15bbe 100644 >> --- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts >> +++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts >> @@ -87,6 +87,29 @@ ap_ts_pen_1v8: &i2c13 { >> pins = "gpio51"; >> }; >> >> +&sound { >> + audio-routing = >> + "IN1_HPHL", "HPHL_OUT", >> + "IN2_HPHR", "HPHR_OUT", >> + "AMIC1", "MIC BIAS1", >> + "AMIC2", "MIC BIAS2", >> + "VA DMIC0", "MIC BIAS1", >> + "VA DMIC1", "MIC BIAS1", >> + "VA DMIC2", "MIC BIAS3", >> + "VA DMIC3", "MIC BIAS3", >> + "TX SWR_ADC0", "ADC1_OUTPUT", >> + "TX SWR_ADC1", "ADC2_OUTPUT", >> + "TX SWR_ADC2", "ADC3_OUTPUT", >> + "TX SWR_DMIC0", "DMIC1_OUTPUT", >> + "TX SWR_DMIC1", "DMIC2_OUTPUT", >> + "TX SWR_DMIC2", "DMIC3_OUTPUT", >> + "TX SWR_DMIC3", "DMIC4_OUTPUT", >> + "TX SWR_DMIC4", "DMIC5_OUTPUT", >> + "TX SWR_DMIC5", "DMIC6_OUTPUT", >> + "TX SWR_DMIC6", "DMIC7_OUTPUT", >> + "TX SWR_DMIC7", "DMIC8_OUTPUT"; >> +}; > Should this also be added to sc7280-herobrine-crd.dts? Okay. Will add it corresponding dts file. > >> + >> &wcd938x { >> pinctrl-names = "default"; >> pinctrl-0 = <&us_euro_hs_sel>; >> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi >> index e880837..640b1338 100644 >> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi >> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi >> @@ -85,6 +85,99 @@ >> pinctrl-names = "default"; >> pinctrl-0 = <&nvme_pwren>; >> }; >> + >> + sound: sound { >> + compatible = "google,sc7280-herobrine"; >> + model = "sc7280-wcd938x-max98360a-1mic"; >> + >> + audio-routing = >> + "IN1_HPHL", "HPHL_OUT", >> + "IN2_HPHR", "HPHR_OUT", >> + "AMIC1", "MIC BIAS1", >> + "AMIC2", "MIC BIAS2", >> + "VA DMIC0", "MIC BIAS3", >> + "VA DMIC1", "MIC BIAS3", >> + "VA DMIC2", "MIC BIAS1", >> + "VA DMIC3", "MIC BIAS1", >> + "TX SWR_ADC0", "ADC1_OUTPUT", >> + "TX SWR_ADC1", "ADC2_OUTPUT", >> + "TX SWR_ADC2", "ADC3_OUTPUT", >> + "TX SWR_DMIC0", "DMIC1_OUTPUT", >> + "TX SWR_DMIC1", "DMIC2_OUTPUT", >> + "TX SWR_DMIC2", "DMIC3_OUTPUT", >> + "TX SWR_DMIC3", "DMIC4_OUTPUT", >> + "TX SWR_DMIC4", "DMIC5_OUTPUT", >> + "TX SWR_DMIC5", "DMIC6_OUTPUT", >> + "TX SWR_DMIC6", "DMIC7_OUTPUT", >> + "TX SWR_DMIC7", "DMIC8_OUTPUT"; >> + >> + qcom,msm-mbhc-hphl-swh = <1>; >> + qcom,msm-mbhc-gnd-swh = <1>; >> + >> + #address-cells = <1>; >> + #size-cells = <0>; >> + #sound-dai-cells = <0>; >> + >> + dai-link@1 { > The '@1' is the address of the lpass CPU DAI, which doesn't seem correct > here. As I brought up on v7 [1] I think this value isn't even necessarily > unique, a SoC could have multiple IP blocks with audio buses, each with > their own DAI address space. The binding (currently) requires an > 'address'/id, rather than using the CPU DAI id I suggest to enumerate the > links linearly, starting with 0. Okay. Will update accordingly. > > [1] https://patchwork.kernel.org/project/linux-arm-msm/patch/1649863277-31615-5-git-send-email-quic_srivasam@quicinc.com/ > >> + link-name = "MAX98360A"; > The binding requires a 'reg' property, even though it isn't used (also > discussed on v7). I think the 'reg' property should be removed from the > binding and the DTs that use it, but maybe that should be done in a > separate series. In the meantime the value should match that of the > node. Okay. for now will revert this change. and will take care your suggestion in a separate patch set. > >> + >> + cpu { >> + sound-dai = <&lpass_cpu MI2S_SECONDARY>; >> + }; >> + >> + codec { >> + sound-dai = <&max98360a>; >> + }; >> + }; >> + >> + dai-link@5 { >> + link-name = "DisplayPort"; >> + >> + cpu { >> + sound-dai = <&lpass_cpu LPASS_DP_RX>; >> + }; >> + >> + codec { >> + sound-dai = <&mdss_dp>; >> + }; >> + }; >> + >> + dai-link@6 { >> + link-name = "WCD9385 Playback"; >> + >> + cpu { >> + sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>; >> + }; >> + >> + codec { >> + sound-dai = <&wcd938x 0>, <&swr0 0>, <&lpass_rx_macro 0>; >> + }; >> + }; >> + >> + dai-link@19 { >> + link-name = "WCD9385 Capture"; >> + >> + cpu { >> + sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>; >> + }; >> + >> + codec { >> + sound-dai = <&wcd938x 1>, <&swr1 0>, <&lpass_tx_macro 0>; >> + }; >> + }; >> + >> + dai-link@25 { >> + link-name = "DMIC"; >> + >> + cpu { >> + sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>; >> + }; >> + >> + codec { >> + sound-dai = <&lpass_va_macro 0>; >> + }; >> + }; >> + }; >> }; >> >> &apps_rsc { >> -- >> 2.7.4 >>
diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts index aa0bf6e2..bf15bbe 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts +++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts @@ -87,6 +87,29 @@ ap_ts_pen_1v8: &i2c13 { pins = "gpio51"; }; +&sound { + audio-routing = + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC2", "MIC BIAS3", + "VA DMIC3", "MIC BIAS3", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; +}; + &wcd938x { pinctrl-names = "default"; pinctrl-0 = <&us_euro_hs_sel>; diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index e880837..640b1338 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -85,6 +85,99 @@ pinctrl-names = "default"; pinctrl-0 = <&nvme_pwren>; }; + + sound: sound { + compatible = "google,sc7280-herobrine"; + model = "sc7280-wcd938x-max98360a-1mic"; + + audio-routing = + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS3", + "VA DMIC1", "MIC BIAS3", + "VA DMIC2", "MIC BIAS1", + "VA DMIC3", "MIC BIAS1", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; + + qcom,msm-mbhc-hphl-swh = <1>; + qcom,msm-mbhc-gnd-swh = <1>; + + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <0>; + + dai-link@1 { + link-name = "MAX98360A"; + + cpu { + sound-dai = <&lpass_cpu MI2S_SECONDARY>; + }; + + codec { + sound-dai = <&max98360a>; + }; + }; + + dai-link@5 { + link-name = "DisplayPort"; + + cpu { + sound-dai = <&lpass_cpu LPASS_DP_RX>; + }; + + codec { + sound-dai = <&mdss_dp>; + }; + }; + + dai-link@6 { + link-name = "WCD9385 Playback"; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>; + }; + + codec { + sound-dai = <&wcd938x 0>, <&swr0 0>, <&lpass_rx_macro 0>; + }; + }; + + dai-link@19 { + link-name = "WCD9385 Capture"; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>; + }; + + codec { + sound-dai = <&wcd938x 1>, <&swr1 0>, <&lpass_tx_macro 0>; + }; + }; + + dai-link@25 { + link-name = "DMIC"; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>; + }; + + codec { + sound-dai = <&lpass_va_macro 0>; + }; + }; + }; }; &apps_rsc {