diff mbox series

[v10,2/4] drm/msm/dp: Support only IRQ_HPD and REPLUG interrupts for eDP

Message ID 1650887072-16652-3-git-send-email-quic_sbillaka@quicinc.com (mailing list archive)
State Not Applicable
Headers show
Series Add support for the eDP panel over aux_bus | expand

Commit Message

Sankeerth Billakanti (QUIC) April 25, 2022, 11:44 a.m. UTC 
The panel-edp enables the eDP panel power during probe, get_modes
and pre-enable. The eDP connect and disconnect interrupts for the eDP/DP
controller are directly dependent on panel power. As eDP display can be
assumed as always connected, the controller driver can skip the eDP
connect and disconnect interrupts. Any disruption in the link status
will be indicated via the IRQ_HPD interrupts.

So, the eDP controller driver can just enable the IRQ_HPD and replug
interrupts. The DP controller driver still needs to enable all the
interrupts.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
Changes in v10:
  - none

Changes in v9:
  - add comment explaining the interrupt status register

Changes in v8:
  - add comment explaining the interrupt status return

Changes in v7:
  - reordered the patch in the series
  - modified the return statement for isr
  - connector check modified to just check for eDP

 drivers/gpu/drm/msm/dp/dp_catalog.c | 16 ++++++++++------
 drivers/gpu/drm/msm/dp/dp_display.c | 22 +++++++++++++++++++++-
 2 files changed, 31 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/dp/dp_catalog.c b/drivers/gpu/drm/msm/dp/dp_catalog.c
index fac815f..df9670d 100644
--- a/drivers/gpu/drm/msm/dp/dp_catalog.c
+++ b/drivers/gpu/drm/msm/dp/dp_catalog.c
@@ -569,10 +569,6 @@  void dp_catalog_ctrl_hpd_config(struct dp_catalog *dp_catalog)
 
 	u32 reftimer = dp_read_aux(catalog, REG_DP_DP_HPD_REFTIMER);
 
-	/* enable HPD plug and unplug interrupts */
-	dp_catalog_hpd_config_intr(dp_catalog,
-		DP_DP_HPD_PLUG_INT_MASK | DP_DP_HPD_UNPLUG_INT_MASK, true);
-
 	/* Configure REFTIMER and enable it */
 	reftimer |= DP_DP_HPD_REFTIMER_ENABLE;
 	dp_write_aux(catalog, REG_DP_DP_HPD_REFTIMER, reftimer);
@@ -599,13 +595,21 @@  u32 dp_catalog_hpd_get_intr_status(struct dp_catalog *dp_catalog)
 {
 	struct dp_catalog_private *catalog = container_of(dp_catalog,
 				struct dp_catalog_private, dp_catalog);
-	int isr = 0;
+	int isr, mask;
 
 	isr = dp_read_aux(catalog, REG_DP_DP_HPD_INT_STATUS);
 	dp_write_aux(catalog, REG_DP_DP_HPD_INT_ACK,
 				 (isr & DP_DP_HPD_INT_MASK));
+	mask = dp_read_aux(catalog, REG_DP_DP_HPD_INT_MASK);
 
-	return isr;
+	/*
+	 * We only want to return interrupts that are unmasked to the caller.
+	 * However, the interrupt status field also contains other
+	 * informational bits about the HPD state status, so we only mask
+	 * out the part of the register that tells us about which interrupts
+	 * are pending.
+	 */
+	return isr & (mask | ~DP_DP_HPD_INT_MASK);
 }
 
 int dp_catalog_ctrl_get_interrupt(struct dp_catalog *dp_catalog)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index f772d84..d25fa1f 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -683,7 +683,8 @@  static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
 	dp_display_handle_plugged_change(&dp->dp_display, false);
 
 	/* enable HDP plug interrupt to prepare for next plugin */
-	dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, true);
+	if (!dp->dp_display.is_edp)
+		dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, true);
 
 	DRM_DEBUG_DP("After, type=%d hpd_state=%d\n",
 			dp->dp_display.connector_type, state);
@@ -1096,6 +1097,13 @@  static void dp_display_config_hpd(struct dp_display_private *dp)
 	dp_display_host_init(dp);
 	dp_catalog_ctrl_hpd_config(dp->catalog);
 
+	/* Enable plug and unplug interrupts only for external DisplayPort */
+	if (!dp->dp_display.is_edp)
+		dp_catalog_hpd_config_intr(dp->catalog,
+				DP_DP_HPD_PLUG_INT_MASK |
+				DP_DP_HPD_UNPLUG_INT_MASK,
+				true);
+
 	/* Enable interrupt first time
 	 * we are leaving dp clocks on during disconnect
 	 * and never disable interrupt
@@ -1381,6 +1389,12 @@  static int dp_pm_resume(struct device *dev)
 	dp_catalog_ctrl_hpd_config(dp->catalog);
 
 
+	if (!dp->dp_display.is_edp)
+		dp_catalog_hpd_config_intr(dp->catalog,
+				DP_DP_HPD_PLUG_INT_MASK |
+				DP_DP_HPD_UNPLUG_INT_MASK,
+				true);
+
 	if (dp_catalog_link_is_connected(dp->catalog)) {
 		/*
 		 * set sink to normal operation mode -- D0
@@ -1658,6 +1672,9 @@  void dp_bridge_enable(struct drm_bridge *drm_bridge)
 		return;
 	}
 
+	if (dp->is_edp)
+		dp_hpd_plug_handle(dp_display, 0);
+
 	mutex_lock(&dp_display->event_mutex);
 
 	/* stop sentinel checking */
@@ -1722,6 +1739,9 @@  void dp_bridge_post_disable(struct drm_bridge *drm_bridge)
 
 	dp_display = container_of(dp, struct dp_display_private, dp_display);
 
+	if (dp->is_edp)
+		dp_hpd_unplug_handle(dp_display, 0);
+
 	mutex_lock(&dp_display->event_mutex);
 
 	/* stop sentinel checking */