diff mbox series

[v4,1/3] phy/qualcomm: add regulator_set_load to edp phy

Message ID 1652909790-16245-2-git-send-email-quic_khsieh@quicinc.com (mailing list archive)
State Superseded
Headers show
Series eDP/DP Phy vdda realted function | expand

Commit Message

Kuogee Hsieh May 18, 2022, 9:36 p.m. UTC
This patch add regulator_set_load() before enable regulator at
eDP phy driver.

Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
---
 drivers/phy/qualcomm/phy-qcom-edp.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

Comments

Dmitry Baryshkov May 18, 2022, 10:32 p.m. UTC | #1
On Thu, 19 May 2022 at 00:36, Kuogee Hsieh <quic_khsieh@quicinc.com> wrote:
>
> This patch add regulator_set_load() before enable regulator at
> eDP phy driver.
>
> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---
>  drivers/phy/qualcomm/phy-qcom-edp.c | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
> index cacd32f..fbe0be0 100644
> --- a/drivers/phy/qualcomm/phy-qcom-edp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-edp.c
> @@ -87,14 +87,20 @@ struct qcom_edp {
>
>         struct clk_bulk_data clks[2];
>         struct regulator_bulk_data supplies[2];
> +       int enable_load[2];
>  };
>
>  static int qcom_edp_phy_init(struct phy *phy)
>  {
>         struct qcom_edp *edp = phy_get_drvdata(phy);
>         int ret;
> +       int num_consumers = ARRAY_SIZE(edp->supplies);

No need to. ARRAY_SIZE is compile-time calculated.

> +       int i;
>
> -       ret = regulator_bulk_enable(ARRAY_SIZE(edp->supplies), edp->supplies);
> +       for (i = num_consumers - 1; i >= 0; --i)
> +               regulator_set_load(edp->supplies[i].consumer, edp->enable_load[i]);

Please. Change this to the ascending order or provide a good
description why it's done the other way. Your pointer to
regulator_bulk_enable() is not valid, as it processes arrays in the
ascending order.

> +
> +       ret = regulator_bulk_enable(num_consumers, edp->supplies);
>         if (ret)
>                 return ret;
>
> @@ -635,6 +641,8 @@ static int qcom_edp_phy_probe(struct platform_device *pdev)
>
>         edp->supplies[0].supply = "vdda-phy";
>         edp->supplies[1].supply = "vdda-pll";
> +       edp->enable_load[0] = 21800;    /* load for 1.2 V vdda-phy supply */
> +       edp->enable_load[1] = 36000;    /* load for 1.2 V vdda-pll supply */

Isn't vdda-pll 0.9V? On sm8250 I see VDD_A_USB0_SS_DP_1P2 and
VDD_A_USB0_SS_DP_CORE (which is 0.9V).

>         ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(edp->supplies), edp->supplies);
>         if (ret)
>                 return ret;
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index cacd32f..fbe0be0 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -87,14 +87,20 @@  struct qcom_edp {
 
 	struct clk_bulk_data clks[2];
 	struct regulator_bulk_data supplies[2];
+	int enable_load[2];
 };
 
 static int qcom_edp_phy_init(struct phy *phy)
 {
 	struct qcom_edp *edp = phy_get_drvdata(phy);
 	int ret;
+	int num_consumers = ARRAY_SIZE(edp->supplies);
+	int i;
 
-	ret = regulator_bulk_enable(ARRAY_SIZE(edp->supplies), edp->supplies);
+	for (i = num_consumers - 1; i >= 0; --i)
+		regulator_set_load(edp->supplies[i].consumer, edp->enable_load[i]);
+
+	ret = regulator_bulk_enable(num_consumers, edp->supplies);
 	if (ret)
 		return ret;
 
@@ -635,6 +641,8 @@  static int qcom_edp_phy_probe(struct platform_device *pdev)
 
 	edp->supplies[0].supply = "vdda-phy";
 	edp->supplies[1].supply = "vdda-pll";
+	edp->enable_load[0] = 21800;	/* load for 1.2 V vdda-phy supply */
+	edp->enable_load[1] = 36000;	/* load for 1.2 V vdda-pll supply */
 	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(edp->supplies), edp->supplies);
 	if (ret)
 		return ret;