| Message ID | 1654013693-21484-2-git-send-email-quic_kriskura@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add QCOM SNPS PHY overriding params support | expand |
On Tue, 31 May 2022 21:44:51 +0530, Krishna Kurapati wrote: > From: Sandeep Maheswaram <quic_c_sanm@quicinc.com> > > Add device tree bindings for SNPS phy tuning parameters. > > Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com> > Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > .../bindings/phy/qcom,usb-snps-femto-v2.yaml | 96 ++++++++++++++++++++++ > 1 file changed, 96 insertions(+) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: properties:qcom,squelch-detector-bp: 'oneOf' conditional failed, one must be fixed: 'type' is a required property hint: A vendor boolean property can use "type: boolean" Additional properties are not allowed ('maximum', 'minimum' were unexpected) hint: A vendor boolean property can use "type: boolean" /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: properties:qcom,squelch-detector-bp: 'oneOf' conditional failed, one must be fixed: 'enum' is a required property 'const' is a required property hint: A vendor string property with exact values has an implicit type from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: properties:qcom,squelch-detector-bp: 'oneOf' conditional failed, one must be fixed: '$ref' is a required property 'allOf' is a required property hint: A vendor property needs a $ref to types.yaml from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# hint: Vendor specific properties must have a type and description unless they have a defined, common suffix. from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: properties:qcom,ls-fs-output-impedance-bp: 'oneOf' conditional failed, one must be fixed: 'type' is a required property hint: A vendor boolean property can use "type: boolean" Additional properties are not allowed ('maximum', 'minimum' were unexpected) hint: A vendor boolean property can use "type: boolean" /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: properties:qcom,ls-fs-output-impedance-bp: 'oneOf' conditional failed, one must be fixed: 'enum' is a required property 'const' is a required property hint: A vendor string property with exact values has an implicit type from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: properties:qcom,ls-fs-output-impedance-bp: 'oneOf' conditional failed, one must be fixed: '$ref' is a required property 'allOf' is a required property hint: A vendor property needs a $ref to types.yaml from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# hint: Vendor specific properties must have a type and description unless they have a defined, common suffix. from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: properties:qcom,hs-amplitude-bp: 'oneOf' conditional failed, one must be fixed: 'type' is a required property hint: A vendor boolean property can use "type: boolean" Additional properties are not allowed ('maximum', 'minimum' were unexpected) hint: A vendor boolean property can use "type: boolean" /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: properties:qcom,hs-amplitude-bp: 'oneOf' conditional failed, one must be fixed: 'enum' is a required property 'const' is a required property hint: A vendor string property with exact values has an implicit type from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: properties:qcom,hs-amplitude-bp: 'oneOf' conditional failed, one must be fixed: '$ref' is a required property 'allOf' is a required property hint: A vendor property needs a $ref to types.yaml from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# hint: Vendor specific properties must have a type and description unless they have a defined, common suffix. from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: properties:qcom,pre-emphasis-duration-bp: 'oneOf' conditional failed, one must be fixed: 'type' is a required property hint: A vendor boolean property can use "type: boolean" Additional properties are not allowed ('maximum', 'minimum' were unexpected) hint: A vendor boolean property can use "type: boolean" /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: properties:qcom,pre-emphasis-duration-bp: 'oneOf' conditional failed, one must be fixed: 'enum' is a required property 'const' is a required property hint: A vendor string property with exact values has an implicit type from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: properties:qcom,pre-emphasis-duration-bp: 'oneOf' conditional failed, one must be fixed: '$ref' is a required property 'allOf' is a required property hint: A vendor property needs a $ref to types.yaml from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# hint: Vendor specific properties must have a type and description unless they have a defined, common suffix. from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: properties:qcom,pre-emphasis-amplitude-bp: 'oneOf' conditional failed, one must be fixed: 'type' is a required property hint: A vendor boolean property can use "type: boolean" Additional properties are not allowed ('maximum', 'minimum' were unexpected) hint: A vendor boolean property can use "type: boolean" /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: properties:qcom,pre-emphasis-amplitude-bp: 'oneOf' conditional failed, one must be fixed: 'enum' is a required property 'const' is a required property hint: A vendor string property with exact values has an implicit type from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: properties:qcom,pre-emphasis-amplitude-bp: 'oneOf' conditional failed, one must be fixed: '$ref' is a required property 'allOf' is a required property hint: A vendor property needs a $ref to types.yaml from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# hint: Vendor specific properties must have a type and description unless they have a defined, common suffix. from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: properties:qcom,hs-disconnect-bp: 'oneOf' conditional failed, one must be fixed: 'type' is a required property hint: A vendor boolean property can use "type: boolean" Additional properties are not allowed ('maximum', 'minimum' were unexpected) hint: A vendor boolean property can use "type: boolean" /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: properties:qcom,hs-disconnect-bp: 'oneOf' conditional failed, one must be fixed: 'enum' is a required property 'const' is a required property hint: A vendor string property with exact values has an implicit type from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: properties:qcom,hs-disconnect-bp: 'oneOf' conditional failed, one must be fixed: '$ref' is a required property 'allOf' is a required property hint: A vendor property needs a $ref to types.yaml from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# hint: Vendor specific properties must have a type and description unless they have a defined, common suffix. from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: properties:qcom,hs-rise-fall-time-bp: 'oneOf' conditional failed, one must be fixed: 'type' is a required property hint: A vendor boolean property can use "type: boolean" Additional properties are not allowed ('maximum', 'minimum' were unexpected) hint: A vendor boolean property can use "type: boolean" /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: properties:qcom,hs-rise-fall-time-bp: 'oneOf' conditional failed, one must be fixed: 'enum' is a required property 'const' is a required property hint: A vendor string property with exact values has an implicit type from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: properties:qcom,hs-rise-fall-time-bp: 'oneOf' conditional failed, one must be fixed: '$ref' is a required property 'allOf' is a required property hint: A vendor property needs a $ref to types.yaml from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# hint: Vendor specific properties must have a type and description unless they have a defined, common suffix. from schema $id: http://devicetree.org/meta-schemas/vendor-props.yaml# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: ignoring, error in schema: properties: qcom,hs-rise-fall-time-bp Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.example.dtb:0:0: /example-0/phy@88e2000: failed to match any schema with compatible: ['qcom,sm8150-usb-hs-phy'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml index 1ce251d..daeeb04 100644 --- a/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml +++ b/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml @@ -53,6 +53,102 @@ properties: vdda33-supply: description: phandle to the regulator 3.3V supply node. + qcom,hs-disconnect-bp: + description: + This adjusts the voltage level for the threshold used to + detect a disconnect event at the host. Possible values are. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + minimum: -272 + maximum: 2156 + + qcom,squelch-detector-bp: + description: + This adjusts the voltage level for the threshold used to + detect valid high-speed data. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + minimum: -2090 + maximum: 1590 + + qcom,hs-amplitude-bp: + description: + This adjusts the high-speed DC level voltage. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + minimum: -660 + maximum: 2670 + + qcom,pre-emphasis-duration-bp: + description: + This signal controls the duration for which the + HS pre-emphasis current is sourced onto DP<#> or DM<#>. + The HS Transmitter pre-emphasis duration is defined in terms of + unit amounts. One unit of pre-emphasis duration is approximately + 650 ps and is defined as 1X pre-emphasis duration. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + minimum: 10000 + maximum: 20000 + + qcom,pre-emphasis-amplitude-bp: + description: + This signal controls the amount of current sourced to + DP<#> and DM<#> after a J-to-K or K-to-J transition. + The HS Transmitter pre-emphasis current is defined in terms of unit + amounts. One unit amount is approximately 2 mA and is defined as + 1X pre-emphasis current. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + minimum: 10000 + maximum: 40000 + + qcom,hs-rise-fall-time-bp: + description: + This adjusts the rise/fall times of the high-speed waveform. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + minimum: -4100 + maximum: 5430 + + qcom,hs-crossover-voltage-microvolt: + description: + This adjusts the voltage at which the DP<#> and DM<#> + signals cross while transmitting in HS mode. + The values defined are in milli volts. The hardware accepts only + discrete values. The value closest to the provided input will be + chosen as the override value for this param. + minimum: -31000 + maximum: 28000 + + qcom,hs-output-impedance-micro-ohms: + description: + In some applications, there can be significant series resistance + on the D+ and D- paths between the transceiver and cable. This adjusts + the driver source impedance to compensate for added series + resistance on the USB. The values defined are in milli ohms. + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + minimum: -2300000 + maximum: 6100000 + + qcom,ls-fs-output-impedance-bp: + description: + This adjusts the low- and full-speed single-ended source + impedance while driving high. The following adjustment values are based + on nominal process, voltage, and temperature. + The values defined are in multiples of basis points (1bp = 0.01%). + The hardware accepts only discrete values. The value closest to the + provided input will be chosen as the override value for this param. + minimum: -1053 + maximum: 1310 + required: - compatible - reg