diff mbox series

[V15,1/9] dt-bindings: mfd: pm8008: Add reset-gpios

Message ID 1655200111-18357-2-git-send-email-quic_c_skakit@quicinc.com (mailing list archive)
State Not Applicable
Headers show
Series Add Qualcomm Technologies, Inc. PM8008 regulator driver | expand

Commit Message

Satya Priya Kakitapalli (Temp) June 14, 2022, 9:48 a.m. UTC 
Add reset-gpios property for pm8008.

Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes in V15:
 - None.

Changes in V14:
 - None.

Changes in V13:
 - None.

 Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Lee Jones June 16, 2022, 8:58 p.m. UTC | #1 
On Tue, 14 Jun 2022, Satya Priya wrote:

> Add reset-gpios property for pm8008.
> 
> Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com>
> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
> Changes in V15:
>  - None.
> 
> Changes in V14:
>  - None.
> 
> Changes in V13:
>  - None.
> 
>  Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml | 7 +++++++
>  1 file changed, 7 insertions(+)

For my own reference (apply this as-is to your sign-off block):

  Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
index ec3138c..a89649c 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
@@ -44,6 +44,9 @@  properties:
   "#size-cells":
     const: 0
 
+  reset-gpios:
+    maxItems: 1
+
 patternProperties:
   "^gpio@[0-9a-f]+$":
     type: object
@@ -92,6 +95,7 @@  required:
   - "#address-cells"
   - "#size-cells"
   - "#interrupt-cells"
+  - reset-gpios
 
 additionalProperties: false
 
@@ -99,6 +103,7 @@  examples:
   - |
     #include <dt-bindings/mfd/qcom-pm8008.h>
     #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
     qupv3_se13_i2c {
       #address-cells = <1>;
       #size-cells = <0>;
@@ -113,6 +118,8 @@  examples:
         interrupt-parent = <&tlmm>;
         interrupts = <32 IRQ_TYPE_EDGE_RISING>;
 
+        reset-gpios = <&pm8350c_gpios 4 GPIO_ACTIVE_LOW>;
+
         pm8008_gpios: gpio@c000 {
           compatible = "qcom,pm8008-gpio", "qcom,spmi-gpio";
           reg = <0xc000>;