diff mbox series

[v9] drm/msm/dp: force link training for display resolution change

Message ID 1655411200-7255-1-git-send-email-quic_khsieh@quicinc.com (mailing list archive)
State Not Applicable
Headers show
Series [v9] drm/msm/dp: force link training for display resolution change | expand

Commit Message

Kuogee Hsieh June 16, 2022, 8:26 p.m. UTC
Display resolution change is implemented through drm modeset. Older
modeset (resolution) has to be disabled first before newer modeset
(resolution) can be enabled. Display disable will turn off both
pixel clock and main link clock so that main link have to be
re-trained during display enable to have new video stream flow
again. At current implementation, display enable function manually
kicks up irq_hpd_handle which will read panel link status and start
link training if link status is not in sync state.

However, there is rare case that a particular panel links status keep
staying in sync for some period of time after main link had been shut
down previously at display disabled. In this case, main link retraining
will not be executed by irq_hdp_handle(). Hence video stream of newer
display resolution will fail to be transmitted to panel due to main
link is not in sync between host and panel.

This patch will bypass irq_hpd_handle() in favor of directly call
dp_ctrl_on_stream() to always perform link training in regardless of
main link status. So that no unexpected exception resolution change
failure cases will happen. Also this implementation are more efficient
than manual kicking off irq_hpd_handle function.

Changes in v2:
-- set force_link_train flag on DP only (is_edp == false)

Changes in v3:
-- revise commit  text
-- add Fixes tag

Changes in v4:
-- revise commit  text

Changes in v5:
-- fix spelling at commit text

Changes in v6:
-- split dp_ctrl_on_stream() for phy test case
-- revise commit text for modeset

Changes in v7:
-- drop 0 assignment at local variable (ret = 0)

Changes in v8:
-- add patch to remove pixel_rate from dp_ctrl

Changes in v9:
-- forward declare dp_ctrl_on_stream_phy_test_report()

Fixes: 62671d2ef24b ("drm/msm/dp: fixes wrong connection state caused by failure of link train")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
---
 drivers/gpu/drm/msm/dp/dp_ctrl.c    | 33 +++++++++++++++++++++++++--------
 drivers/gpu/drm/msm/dp/dp_ctrl.h    |  2 +-
 drivers/gpu/drm/msm/dp/dp_display.c | 13 ++++++-------
 3 files changed, 32 insertions(+), 16 deletions(-)

Comments

Stephen Boyd June 16, 2022, 11:39 p.m. UTC | #1
Quoting Kuogee Hsieh (2022-06-16 13:26:40)
> Display resolution change is implemented through drm modeset. Older
> modeset (resolution) has to be disabled first before newer modeset
> (resolution) can be enabled. Display disable will turn off both
> pixel clock and main link clock so that main link have to be
> re-trained during display enable to have new video stream flow
> again. At current implementation, display enable function manually
> kicks up irq_hpd_handle which will read panel link status and start
> link training if link status is not in sync state.
>
> However, there is rare case that a particular panel links status keep
> staying in sync for some period of time after main link had been shut
> down previously at display disabled. In this case, main link retraining
> will not be executed by irq_hdp_handle(). Hence video stream of newer
> display resolution will fail to be transmitted to panel due to main
> link is not in sync between host and panel.
>
> This patch will bypass irq_hpd_handle() in favor of directly call
> dp_ctrl_on_stream() to always perform link training in regardless of
> main link status. So that no unexpected exception resolution change
> failure cases will happen. Also this implementation are more efficient
> than manual kicking off irq_hpd_handle function.
>
> Changes in v2:
> -- set force_link_train flag on DP only (is_edp == false)
>
> Changes in v3:
> -- revise commit  text
> -- add Fixes tag
>
> Changes in v4:
> -- revise commit  text
>
> Changes in v5:
> -- fix spelling at commit text
>
> Changes in v6:
> -- split dp_ctrl_on_stream() for phy test case
> -- revise commit text for modeset
>
> Changes in v7:
> -- drop 0 assignment at local variable (ret = 0)
>
> Changes in v8:
> -- add patch to remove pixel_rate from dp_ctrl
>
> Changes in v9:
> -- forward declare dp_ctrl_on_stream_phy_test_report()
>
> Fixes: 62671d2ef24b ("drm/msm/dp: fixes wrong connection state caused by failure of link train")
> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
index af7a80c..f090945 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -1528,6 +1528,8 @@  static int dp_ctrl_link_maintenance(struct dp_ctrl_private *ctrl)
 	return ret;
 }
 
+static int dp_ctrl_on_stream_phy_test_report(struct dp_ctrl *dp_ctrl);
+
 static int dp_ctrl_process_phy_test_request(struct dp_ctrl_private *ctrl)
 {
 	int ret = 0;
@@ -1551,7 +1553,7 @@  static int dp_ctrl_process_phy_test_request(struct dp_ctrl_private *ctrl)
 
 	ret = dp_ctrl_on_link(&ctrl->dp_ctrl);
 	if (!ret)
-		ret = dp_ctrl_on_stream(&ctrl->dp_ctrl);
+		ret = dp_ctrl_on_stream_phy_test_report(&ctrl->dp_ctrl);
 	else
 		DRM_ERROR("failed to enable DP link controller\n");
 
@@ -1807,7 +1809,27 @@  static int dp_ctrl_link_retrain(struct dp_ctrl_private *ctrl)
 	return dp_ctrl_setup_main_link(ctrl, &training_step);
 }
 
-int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl)
+static int dp_ctrl_on_stream_phy_test_report(struct dp_ctrl *dp_ctrl)
+{
+	int ret;
+	struct dp_ctrl_private *ctrl;
+
+	ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
+
+	ctrl->dp_ctrl.pixel_rate = ctrl->panel->dp_mode.drm_mode.clock;
+
+	ret = dp_ctrl_enable_stream_clocks(ctrl);
+	if (ret) {
+		DRM_ERROR("Failed to start pixel clocks. ret=%d\n", ret);
+		return ret;
+	}
+
+	dp_ctrl_send_phy_test_pattern(ctrl);
+
+	return 0;
+}
+
+int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl, bool force_link_train)
 {
 	int ret = 0;
 	bool mainlink_ready = false;
@@ -1843,12 +1865,7 @@  int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl)
 		goto end;
 	}
 
-	if (ctrl->link->sink_request & DP_TEST_LINK_PHY_TEST_PATTERN) {
-		dp_ctrl_send_phy_test_pattern(ctrl);
-		return 0;
-	}
-
-	if (!dp_ctrl_channel_eq_ok(ctrl))
+	if (force_link_train || !dp_ctrl_channel_eq_ok(ctrl))
 		dp_ctrl_link_retrain(ctrl);
 
 	/* stop txing train pattern to end link training */
diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.h b/drivers/gpu/drm/msm/dp/dp_ctrl.h
index 0745fde..b563e2e 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.h
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.h
@@ -21,7 +21,7 @@  struct dp_ctrl {
 };
 
 int dp_ctrl_on_link(struct dp_ctrl *dp_ctrl);
-int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl);
+int dp_ctrl_on_stream(struct dp_ctrl *dp_ctrl, bool force_link_train);
 int dp_ctrl_off_link_stream(struct dp_ctrl *dp_ctrl);
 int dp_ctrl_off_link(struct dp_ctrl *dp_ctrl);
 int dp_ctrl_off(struct dp_ctrl *dp_ctrl);
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index c388323..b6d25ab 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -872,7 +872,7 @@  static int dp_display_enable(struct dp_display_private *dp, u32 data)
 		return 0;
 	}
 
-	rc = dp_ctrl_on_stream(dp->ctrl);
+	rc = dp_ctrl_on_stream(dp->ctrl, data);
 	if (!rc)
 		dp_display->power_on = true;
 
@@ -1654,6 +1654,7 @@  void dp_bridge_enable(struct drm_bridge *drm_bridge)
 	int rc = 0;
 	struct dp_display_private *dp_display;
 	u32 state;
+	bool force_link_train = false;
 
 	dp_display = container_of(dp, struct dp_display_private, dp_display);
 	if (!dp_display->dp_mode.drm_mode.clock) {
@@ -1688,10 +1689,12 @@  void dp_bridge_enable(struct drm_bridge *drm_bridge)
 
 	state =  dp_display->hpd_state;
 
-	if (state == ST_DISPLAY_OFF)
+	if (state == ST_DISPLAY_OFF) {
 		dp_display_host_phy_init(dp_display);
+		force_link_train = true;
+	}
 
-	dp_display_enable(dp_display, 0);
+	dp_display_enable(dp_display, force_link_train);
 
 	rc = dp_display_post_enable(dp);
 	if (rc) {
@@ -1700,10 +1703,6 @@  void dp_bridge_enable(struct drm_bridge *drm_bridge)
 		dp_display_unprepare(dp);
 	}
 
-	/* manual kick off plug event to train link */
-	if (state == ST_DISPLAY_OFF)
-		dp_add_event(dp_display, EV_IRQ_HPD_INT, 0, 0);
-
 	/* completed connection */
 	dp_display->hpd_state = ST_CONNECTED;