diff mbox series

[v14,11/12] arm64: dts: qcom: sc7280: Add sound node for CRD 1.0/2.0 and IDP boards

Message ID 1657200184-29565-12-git-send-email-quic_srivasam@quicinc.com (mailing list archive)
State Accepted
Headers show
Series Add soundcard support for sc7280 based platforms. | expand

Commit Message

Srinivasa Rao Mandadapu July 7, 2022, 1:23 p.m. UTC
Add dt nodes for sound card support on revision 3, 4
(aka CRD 1.0 and 2.0) and IDP boards, which is using WCD9385 headset
playback, capture, I2S speaker playback and DMICs via VA macro.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
 arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 23 +++++++
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi   | 98 ++++++++++++++++++++++++++++++
 2 files changed, 121 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
index 9c21207..dddb505 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
@@ -87,6 +87,29 @@  ap_ts_pen_1v8: &i2c13 {
 	pins = "gpio51";
 };
 
+&sound {
+	audio-routing =
+		"IN1_HPHL", "HPHL_OUT",
+		"IN2_HPHR", "HPHR_OUT",
+		"AMIC1", "MIC BIAS1",
+		"AMIC2", "MIC BIAS2",
+		"VA DMIC0", "MIC BIAS1",
+		"VA DMIC1", "MIC BIAS1",
+		"VA DMIC2", "MIC BIAS3",
+		"VA DMIC3", "MIC BIAS3",
+		"TX SWR_ADC0", "ADC1_OUTPUT",
+		"TX SWR_ADC1", "ADC2_OUTPUT",
+		"TX SWR_ADC2", "ADC3_OUTPUT",
+		"TX SWR_DMIC0", "DMIC1_OUTPUT",
+		"TX SWR_DMIC1", "DMIC2_OUTPUT",
+		"TX SWR_DMIC2", "DMIC3_OUTPUT",
+		"TX SWR_DMIC3", "DMIC4_OUTPUT",
+		"TX SWR_DMIC4", "DMIC5_OUTPUT",
+		"TX SWR_DMIC5", "DMIC6_OUTPUT",
+		"TX SWR_DMIC6", "DMIC7_OUTPUT",
+		"TX SWR_DMIC7", "DMIC8_OUTPUT";
+};
+
 &wcd9385 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index b8405d5..b3a5a2d 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -85,6 +85,104 @@ 
 		pinctrl-names = "default";
 		pinctrl-0 = <&nvme_pwren>;
 	};
+
+	sound: sound {
+		compatible = "google,sc7280-herobrine";
+		model = "sc7280-wcd938x-max98360a-1mic";
+
+		audio-routing =
+			"IN1_HPHL", "HPHL_OUT",
+			"IN2_HPHR", "HPHR_OUT",
+			"AMIC1", "MIC BIAS1",
+			"AMIC2", "MIC BIAS2",
+			"VA DMIC0", "MIC BIAS3",
+			"VA DMIC1", "MIC BIAS3",
+			"VA DMIC2", "MIC BIAS1",
+			"VA DMIC3", "MIC BIAS1",
+			"TX SWR_ADC0", "ADC1_OUTPUT",
+			"TX SWR_ADC1", "ADC2_OUTPUT",
+			"TX SWR_ADC2", "ADC3_OUTPUT",
+			"TX SWR_DMIC0", "DMIC1_OUTPUT",
+			"TX SWR_DMIC1", "DMIC2_OUTPUT",
+			"TX SWR_DMIC2", "DMIC3_OUTPUT",
+			"TX SWR_DMIC3", "DMIC4_OUTPUT",
+			"TX SWR_DMIC4", "DMIC5_OUTPUT",
+			"TX SWR_DMIC5", "DMIC6_OUTPUT",
+			"TX SWR_DMIC6", "DMIC7_OUTPUT",
+			"TX SWR_DMIC7", "DMIC8_OUTPUT";
+
+		qcom,msm-mbhc-hphl-swh = <1>;
+		qcom,msm-mbhc-gnd-swh = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#sound-dai-cells = <0>;
+
+		dai-link@0 {
+			link-name = "MAX98360A";
+			reg = <0>;
+
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+			};
+
+			codec {
+				sound-dai = <&max98360a>;
+			};
+		};
+
+		dai-link@1 {
+			link-name = "DisplayPort";
+			reg = <1>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_DP_RX>;
+			};
+
+			codec {
+				sound-dai = <&mdss_dp>;
+			};
+		};
+
+		dai-link@2 {
+			link-name = "WCD9385 Playback";
+			reg = <2>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
+			};
+
+			codec {
+				sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>;
+			};
+		};
+
+		dai-link@3 {
+			link-name = "WCD9385 Capture";
+			reg = <3>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
+			};
+
+			codec {
+				sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>;
+			};
+		};
+
+		dai-link@4 {
+			link-name = "DMIC";
+			reg = <4>;
+
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_va_macro 0>;
+			};
+		};
+	};
 };
 
 &apps_rsc {