diff mbox series

[v1,1/9] dt-bindings: arm: Add support for DSB element

Message ID 1669018873-4718-2-git-send-email-quic_taozha@quicinc.com (mailing list archive)
State Superseded
Headers show
Series Add support to configure TPDM DSB subunit | expand

Commit Message

Tao Zhang Nov. 21, 2022, 8:21 a.m. UTC
Add property "qcom,dsb-elem-size" to support DSB(Discrete Single
Bit) element for TPDA. Specifies the DSB element size supported
by each monitor connected to the aggregator on each port. Should
be specified in pairs (port, dsb element size).

Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
---
 Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml | 9 +++++++++
 1 file changed, 9 insertions(+)

Comments

Suzuki K Poulose Nov. 21, 2022, 11:44 a.m. UTC | #1
On 21/11/2022 08:21, Tao Zhang wrote:
> Add property "qcom,dsb-elem-size" to support DSB(Discrete Single
> Bit) element for TPDA. Specifies the DSB element size supported
> by each monitor connected to the aggregator on each port. Should
> be specified in pairs (port, dsb element size).
> 
> Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
> ---
>   Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml | 9 +++++++++
>   1 file changed, 9 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
> index c46ddea..e3b58b5 100644
> --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
> +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
> @@ -58,6 +58,13 @@ properties:
>       minItems: 1
>       maxItems: 2
>   
> +  qcom,dsb-elem-size:

minor nit: Couldn't this be qcom,dsb-element-size ? Its not too long 
from what we have and is more meaningful.

Otherwise,

Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>

> +    description: |
> +      Specifies the DSB element size supported by each monitor
> +      connected to the aggregator on each port. Should be specified
> +      in pairs (port, dsb element size).
> +    $ref: /schemas/types.yaml#/definitions/uint32-matrix
> +
>     clocks:
>       maxItems: 1
>   
> @@ -100,6 +107,8 @@ examples:
>          compatible = "qcom,coresight-tpda", "arm,primecell";
>          reg = <0x6004000 0x1000>;
>   
> +       qcom,dsb-elem-size = <0 32>;
> +
>          clocks = <&aoss_qmp>;
>          clock-names = "apb_pclk";
>
Krzysztof Kozlowski Nov. 21, 2022, 4:41 p.m. UTC | #2
On 21/11/2022 09:21, Tao Zhang wrote:
> Add property "qcom,dsb-elem-size" to support DSB(Discrete Single
> Bit) element for TPDA. Specifies the DSB element size supported
> by each monitor connected to the aggregator on each port. Should
> be specified in pairs (port, dsb element size).
> 
> Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
> ---
>  Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
> index c46ddea..e3b58b5 100644
> --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
> +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
> @@ -58,6 +58,13 @@ properties:
>      minItems: 1
>      maxItems: 2
>  
> +  qcom,dsb-elem-size:
> +    description: |
> +      Specifies the DSB element size supported by each monitor
> +      connected to the aggregator on each port. Should be specified
> +      in pairs (port, dsb element size).
> +    $ref: /schemas/types.yaml#/definitions/uint32-matrix

Then you need items, probably with maxItems as well, like:

https://elixir.bootlin.com/linux/v5.19/source/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml#L278

> +
>    clocks:
>      maxItems: 1

>  

Best regards,
Krzysztof
Rob Herring Nov. 30, 2022, 6:15 p.m. UTC | #3
On Mon, Nov 21, 2022 at 04:21:05PM +0800, Tao Zhang wrote:
> Add property "qcom,dsb-elem-size" to support DSB(Discrete Single
> Bit) element for TPDA. Specifies the DSB element size supported
> by each monitor connected to the aggregator on each port. Should
> be specified in pairs (port, dsb element size).
> 
> Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
> ---
>  Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
> index c46ddea..e3b58b5 100644
> --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
> +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
> @@ -58,6 +58,13 @@ properties:
>      minItems: 1
>      maxItems: 2
>  
> +  qcom,dsb-elem-size:
> +    description: |
> +      Specifies the DSB element size supported by each monitor
> +      connected to the aggregator on each port. Should be specified
> +      in pairs (port, dsb element size).

Please define DSB somewhere here and not just the commit msg.

> +    $ref: /schemas/types.yaml#/definitions/uint32-matrix
> +
>    clocks:
>      maxItems: 1
>  
> @@ -100,6 +107,8 @@ examples:
>         compatible = "qcom,coresight-tpda", "arm,primecell";
>         reg = <0x6004000 0x1000>;
>  
> +       qcom,dsb-elem-size = <0 32>;
> +
>         clocks = <&aoss_qmp>;
>         clock-names = "apb_pclk";
>  
> -- 
> 2.7.4
> 
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
index c46ddea..e3b58b5 100644
--- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml
@@ -58,6 +58,13 @@  properties:
     minItems: 1
     maxItems: 2
 
+  qcom,dsb-elem-size:
+    description: |
+      Specifies the DSB element size supported by each monitor
+      connected to the aggregator on each port. Should be specified
+      in pairs (port, dsb element size).
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+
   clocks:
     maxItems: 1
 
@@ -100,6 +107,8 @@  examples:
        compatible = "qcom,coresight-tpda", "arm,primecell";
        reg = <0x6004000 0x1000>;
 
+       qcom,dsb-elem-size = <0 32>;
+
        clocks = <&aoss_qmp>;
        clock-names = "apb_pclk";