| Message ID | 1670267670-15832-2-git-send-email-quic_khsieh@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add data-lanes and link-frequencies to dp_out endpoint | expand |
On 5 December 2022 22:14:26 GMT+03:00, Kuogee Hsieh <quic_khsieh@quicinc.com> wrote: >Move data-lanes property from mdss_dp node to dp_out endpoint. Also >add link-frequencies property into dp_out endpoint as well. The last >frequency specified at link-frequencies will be the max link rate >supported by DP. > >Changes in v5: >-- revert changes at sc7180.dtsi and sc7280.dtsi >-- add &dp_out to sc7180-trogdor.dtsi and sc7280-herobrine.dtsi > >Changes in v6: >-- add data-lanes and link-frequencies to yaml > >Changes in v7: >-- change 160000000 to 1620000000 >-- separate yaml to different patch > >Changes in v8: >-- correct Bjorn mail address to kernel.org > >Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> >--- > arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 6 +++++- > arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 6 +++++- > 2 files changed, 10 insertions(+), 2 deletions(-) > >diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi >index eae22e6..0ad50e2 100644 >--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi >+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi >@@ -814,7 +814,11 @@ hp_i2c: &i2c9 { > status = "okay"; > pinctrl-names = "default"; > pinctrl-0 = <&dp_hot_plug_det>; >- data-lanes = <0 1>; >+}; >+ >+&dp_out { >+ data-lanes = <0 1>; >+ link-frequencies = /bits/ 64 <162000000 270000000 540000000>; This property still uses old values, it was not updated to Hz. > }; > > &pm6150_adc { >diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi >index c11e371..3c7a9d8 100644 >--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi >+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi >@@ -442,7 +442,11 @@ ap_i2c_tpm: &i2c14 { > status = "okay"; > pinctrl-names = "default"; > pinctrl-0 = <&dp_hot_plug_det>; >- data-lanes = <0 1>; >+}; >+ >+&dp_out { >+ data-lanes = <0 1>; >+ link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; > }; > > &mdss_mdp {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index eae22e6..0ad50e2 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -814,7 +814,11 @@ hp_i2c: &i2c9 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dp_hot_plug_det>; - data-lanes = <0 1>; +}; + +&dp_out { + data-lanes = <0 1>; + link-frequencies = /bits/ 64 <162000000 270000000 540000000>; }; &pm6150_adc { diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi index c11e371..3c7a9d8 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi @@ -442,7 +442,11 @@ ap_i2c_tpm: &i2c14 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dp_hot_plug_det>; - data-lanes = <0 1>; +}; + +&dp_out { + data-lanes = <0 1>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; }; &mdss_mdp {
Move data-lanes property from mdss_dp node to dp_out endpoint. Also add link-frequencies property into dp_out endpoint as well. The last frequency specified at link-frequencies will be the max link rate supported by DP. Changes in v5: -- revert changes at sc7180.dtsi and sc7280.dtsi -- add &dp_out to sc7180-trogdor.dtsi and sc7280-herobrine.dtsi Changes in v6: -- add data-lanes and link-frequencies to yaml Changes in v7: -- change 160000000 to 1620000000 -- separate yaml to different patch Changes in v8: -- correct Bjorn mail address to kernel.org Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> --- arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 6 +++++- arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 6 +++++- 2 files changed, 10 insertions(+), 2 deletions(-)