| Message ID | 1675700201-12890-9-git-send-email-quic_srivasam@quicinc.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | Add SC7280 audioreach device tree nodes | expand |
On 06/02/2023 17:16, Srinivasa Rao Mandadapu wrote: > Add reg-names and power-domain-names for remoteproc ADSP pheripheral typo: peripheral > loader. Add firmware-name property to distinguish and load different > firmware binaries of various vendors. > Change qcom,halt-regs property phandle to tcsr_1 from tcsr_mutex. > Also add required-opps property and change power domain from LCX to CX, > which is actual PD to be controlled, for setting appropriate > performance state. > This is to make compatible with remoteproc ADSP PIL driver and > latest device tree changes. > > Fixes: 8490a99586ab ("dt-bindings: remoteproc: qcom: Add SC7280 ADSP support") > Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > .../bindings/remoteproc/qcom,sc7280-adsp-pil.yaml | 30 +++++++++++++++++++--- > 1 file changed, 26 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml > index 94ca7a0..7addc7d 100644 > --- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml > +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml > @@ -23,6 +23,11 @@ properties: > - description: qdsp6ss register > - description: efuse q6ss register > > + reg-names: > + items: > + - const: qdsp6ss_base > + - const: lpass_efuse So your commit adding the bindings: https://lore.kernel.org/all/1664368073-13659-2-git-send-email-quic_srivasam@quicinc.com/ was already incomplete because the same patchset added undocumented properties. I have no clue what is happening with AudioReach sound/ADSP code - it's like random set of changes here and there, without coordination. Drivers come without bindings, DTS comes before bindings... Is your DTS in this patches matching this binding? If so, usage cannot be before the binding is introduced. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml index 94ca7a0..7addc7d 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7280-adsp-pil.yaml @@ -23,6 +23,11 @@ properties: - description: qdsp6ss register - description: efuse q6ss register + reg-names: + items: + - const: qdsp6ss_base + - const: lpass_efuse + iommus: items: - description: Phandle to apps_smmu node with sid mask @@ -57,7 +62,11 @@ properties: power-domains: items: - - description: LCX power domain + - description: CX power domain + + power-domain-names: + items: + - const: cx resets: items: @@ -73,6 +82,12 @@ properties: maxItems: 1 description: Reference to the reserved-memory for the Hexagon core + firmware-name: + $ref: /schemas/types.yaml#/definitions/string + description: + The name of the firmware which should be loaded for this remote + processor. + qcom,halt-regs: $ref: /schemas/types.yaml#/definitions/phandle-array description: @@ -80,7 +95,7 @@ properties: four offsets within syscon for q6, modem, nc and qv6 halt registers. items: - items: - - description: phandle to TCSR_MUTEX registers + - description: phandle to TCSR_1 registers - description: offset to the Q6 halt register - description: offset to the modem halt register - description: offset to the nc halt register @@ -100,6 +115,10 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle description: Reference to the AOSS side-channel message RAM. + required-opps: + description: + A phandle to an OPP node describing required MMCX performance point. + glink-edge: $ref: qcom,glink-edge.yaml# type: object @@ -167,13 +186,16 @@ examples: <&gcc GCC_CFG_NOC_LPASS_CLK>; clock-names = "xo", "gcc_cfg_noc_lpass"; - power-domains = <&rpmhpd SC7280_LCX>; + power-domains = <&rpmhpd SC7280_CX>; + power-domain-names = "cx"; + + required-opps = <&rpmhpd_opp_nom>; resets = <&pdc_reset PDC_AUDIO_SYNC_RESET>, <&aoss_reset AOSS_CC_LPASS_RESTART>; reset-names = "pdc_sync", "cc_lpass"; - qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>; + qcom,halt-regs = <&tcsr_1 0x23000 0x25000 0x28000 0x33000>; memory-region = <&adsp_mem>;
Add reg-names and power-domain-names for remoteproc ADSP pheripheral loader. Add firmware-name property to distinguish and load different firmware binaries of various vendors. Change qcom,halt-regs property phandle to tcsr_1 from tcsr_mutex. Also add required-opps property and change power domain from LCX to CX, which is actual PD to be controlled, for setting appropriate performance state. This is to make compatible with remoteproc ADSP PIL driver and latest device tree changes. Fixes: 8490a99586ab ("dt-bindings: remoteproc: qcom: Add SC7280 ADSP support") Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- .../bindings/remoteproc/qcom,sc7280-adsp-pil.yaml | 30 +++++++++++++++++++--- 1 file changed, 26 insertions(+), 4 deletions(-)