| Message ID | 1677079845-17650-1-git-send-email-quic_mojha@quicinc.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 6871802489e6f118b1d74617345d28ca5125b736 |
| Headers | show |
| Series | [v3] arm64: dts: qcom: sm8450: Add IMEM and PIL info region | expand |
On 22.02.2023 16:30, Mukesh Ojha wrote: > Add a simple-mfd representing IMEM on SM8450 and define the PIL > relocation info region, so that post mortem tools will be able > to locate the loaded remoteprocs. > > Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > Change in v3: > - Sorted by address. > > Changes in v2: > - put ranges after regs and corrected the sram node position. > > arch/arm64/boot/dts/qcom/sm8450.dtsi | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi > index 1a744a3..7671f15 100644 > --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi > @@ -3689,6 +3689,20 @@ > }; > }; > > + sram@146aa000 { > + compatible = "qcom,sm8450-imem", "syscon", "simple-mfd"; > + reg = <0 0x146aa000 0 0x1000>; > + ranges = <0 0 0x146aa000 0x1000>; > + > + #address-cells = <1>; > + #size-cells = <1>; > + > + pil-reloc@94c { > + compatible = "qcom,pil-reloc-info"; > + reg = <0x94c 0xc8>; > + }; > + }; > + > apps_smmu: iommu@15000000 { > compatible = "qcom,sm8450-smmu-500", "arm,mmu-500"; > reg = <0 0x15000000 0 0x100000>;
On Wed, 22 Feb 2023 21:00:45 +0530, Mukesh Ojha wrote: > Add a simple-mfd representing IMEM on SM8450 and define the PIL > relocation info region, so that post mortem tools will be able > to locate the loaded remoteprocs. > > Applied, thanks! [1/1] arm64: dts: qcom: sm8450: Add IMEM and PIL info region commit: d39469f5ce81b2cabf07b1cad3deddeafb7b8a8d Best regards,
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 1a744a3..7671f15 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -3689,6 +3689,20 @@ }; }; + sram@146aa000 { + compatible = "qcom,sm8450-imem", "syscon", "simple-mfd"; + reg = <0 0x146aa000 0 0x1000>; + ranges = <0 0 0x146aa000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,sm8450-smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x100000>;
Add a simple-mfd representing IMEM on SM8450 and define the PIL relocation info region, so that post mortem tools will be able to locate the loaded remoteprocs. Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> --- Change in v3: - Sorted by address. Changes in v2: - put ranges after regs and corrected the sram node position. arch/arm64/boot/dts/qcom/sm8450.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+)