| Message ID | 1682412128-1913-1-git-send-email-quic_vnivarth@quicinc.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | spi: spi-geni-qcom: Correct CS_TOGGLE bit in SPI_TRANS_CFG | expand |
On 4/25/23 09:42, Vijaya Krishna Nivarthi wrote: > The CS_TOGGLE bit when set is supposed to instruct FW to > toggle CS line between words. The driver with intent of > disabling this behaviour has been unsetting BIT(0). This has > not caused any trouble so far because the original BIT(1) > is untouched and BIT(0) likely wasn't being used. > > Correct this to prevent a potential future bug. > > Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com> > --- Has this always been the case, or did the switch to BIT(1) only occur on some recent platforms? Konrad > drivers/spi/spi-geni-qcom.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c > index ba7be50..8a7d1c2 100644 > --- a/drivers/spi/spi-geni-qcom.c > +++ b/drivers/spi/spi-geni-qcom.c > @@ -35,7 +35,7 @@ > #define CS_DEMUX_OUTPUT_SEL GENMASK(3, 0) > > #define SE_SPI_TRANS_CFG 0x25c > -#define CS_TOGGLE BIT(0) > +#define CS_TOGGLE BIT(1) > > #define SE_SPI_WORD_LEN 0x268 > #define WORD_LEN_MSK GENMASK(9, 0)
Hi, On Tue, Apr 25, 2023 at 1:42 AM Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com> wrote: > > The CS_TOGGLE bit when set is supposed to instruct FW to > toggle CS line between words. The driver with intent of > disabling this behaviour has been unsetting BIT(0). This has > not caused any trouble so far because the original BIT(1) > is untouched and BIT(0) likely wasn't being used. > > Correct this to prevent a potential future bug. > > Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com> > --- > drivers/spi/spi-geni-qcom.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c > index ba7be50..8a7d1c2 100644 > --- a/drivers/spi/spi-geni-qcom.c > +++ b/drivers/spi/spi-geni-qcom.c > @@ -35,7 +35,7 @@ > #define CS_DEMUX_OUTPUT_SEL GENMASK(3, 0) > > #define SE_SPI_TRANS_CFG 0x25c > -#define CS_TOGGLE BIT(0) > +#define CS_TOGGLE BIT(1) Looks right to me from the datasheet I have access to. It's definitely specified in an odd way on the datasheet, which lists bit 1 as this, bit 2 and 3 as reserved, but bit 0 is absent. ...but seems like this is really supposed to be 1. I guess this never mattered because all we ever did was clear the bit at init time and it must have already been cleared? ...and, of course, on many Chromebooks we moved to just using a GPIO... Fixes: 561de45f72bd ("spi: spi-geni-qcom: Add SPI driver support for GENI based QUP") Reviewed-by: Douglas Anderson <dianders@chromium.org>
On 4/25/2023 7:15 PM, Konrad Dybcio wrote: > > On 4/25/23 09:42, Vijaya Krishna Nivarthi wrote: >> The CS_TOGGLE bit when set is supposed to instruct FW to >> toggle CS line between words. The driver with intent of >> disabling this behaviour has been unsetting BIT(0). This has >> not caused any trouble so far because the original BIT(1) >> is untouched and BIT(0) likely wasn't being used. >> >> Correct this to prevent a potential future bug. >> >> Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com> >> --- > > Has this always been the case, or did the switch to BIT(1) > only occur on some recent platforms? Thank you very much for the review.. This has always been the case. With intent of disabling CS_TOGGLE, currently, the driver is unsetting BIT(0), though it should have been BIT(1). Yet no problem was encountered because a) BIT(0) seems to be an unused bit b) BIT(1) is probably already unset because its untouched Further more, as Doug pointed we are mostly using GPIO for CS. Testing with the change has not caused any regressions. Thank you, Vijay/ > > Konrad > >> drivers/spi/spi-geni-qcom.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c >> index ba7be50..8a7d1c2 100644 >> --- a/drivers/spi/spi-geni-qcom.c >> +++ b/drivers/spi/spi-geni-qcom.c >> @@ -35,7 +35,7 @@ >> #define CS_DEMUX_OUTPUT_SEL GENMASK(3, 0) >> #define SE_SPI_TRANS_CFG 0x25c >> -#define CS_TOGGLE BIT(0) >> +#define CS_TOGGLE BIT(1) >> #define SE_SPI_WORD_LEN 0x268 >> #define WORD_LEN_MSK GENMASK(9, 0)
On 1.05.2023 10:05, Vijaya Krishna Nivarthi wrote: > On 4/25/2023 7:15 PM, Konrad Dybcio wrote: >> >> On 4/25/23 09:42, Vijaya Krishna Nivarthi wrote: >>> The CS_TOGGLE bit when set is supposed to instruct FW to >>> toggle CS line between words. The driver with intent of >>> disabling this behaviour has been unsetting BIT(0). This has >>> not caused any trouble so far because the original BIT(1) >>> is untouched and BIT(0) likely wasn't being used. >>> >>> Correct this to prevent a potential future bug. >>> >>> Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com> >>> --- >> >> Has this always been the case, or did the switch to BIT(1) >> only occur on some recent platforms? > > > Thank you very much for the review.. > > This has always been the case. > > With intent of disabling CS_TOGGLE, currently, the driver is unsetting BIT(0), though it should have been BIT(1). > > Yet no problem was encountered because > > a) BIT(0) seems to be an unused bit > > b) BIT(1) is probably already unset because its untouched > > Further more, as Doug pointed we are mostly using GPIO for CS. > > > Testing with the change has not caused any regressions. Okay, with no deeper knowledge of the topic best I can give you is: Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad > > > Thank you, > > Vijay/ > > > >> >> Konrad >> >>> drivers/spi/spi-geni-qcom.c | 2 +- >>> 1 file changed, 1 insertion(+), 1 deletion(-) >>> >>> diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c >>> index ba7be50..8a7d1c2 100644 >>> --- a/drivers/spi/spi-geni-qcom.c >>> +++ b/drivers/spi/spi-geni-qcom.c >>> @@ -35,7 +35,7 @@ >>> #define CS_DEMUX_OUTPUT_SEL GENMASK(3, 0) >>> #define SE_SPI_TRANS_CFG 0x25c >>> -#define CS_TOGGLE BIT(0) >>> +#define CS_TOGGLE BIT(1) >>> #define SE_SPI_WORD_LEN 0x268 >>> #define WORD_LEN_MSK GENMASK(9, 0)
On 1.05.2023 14:43, Konrad Dybcio wrote: > > > On 1.05.2023 10:05, Vijaya Krishna Nivarthi wrote: >> On 4/25/2023 7:15 PM, Konrad Dybcio wrote: >>> >>> On 4/25/23 09:42, Vijaya Krishna Nivarthi wrote: >>>> The CS_TOGGLE bit when set is supposed to instruct FW to >>>> toggle CS line between words. The driver with intent of >>>> disabling this behaviour has been unsetting BIT(0). This has >>>> not caused any trouble so far because the original BIT(1) >>>> is untouched and BIT(0) likely wasn't being used. >>>> >>>> Correct this to prevent a potential future bug. >>>> >>>> Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com> >>>> --- >>> >>> Has this always been the case, or did the switch to BIT(1) >>> only occur on some recent platforms? >> >> >> Thank you very much for the review.. >> >> This has always been the case. >> >> With intent of disabling CS_TOGGLE, currently, the driver is unsetting BIT(0), though it should have been BIT(1). >> >> Yet no problem was encountered because >> >> a) BIT(0) seems to be an unused bit >> >> b) BIT(1) is probably already unset because its untouched >> >> Further more, as Doug pointed we are mostly using GPIO for CS. >> >> >> Testing with the change has not caused any regressions. > Okay, with no deeper knowledge of the topic best I can give you is: > > Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> > > Also, missing: Fixes: 561de45f72bd ("spi: spi-geni-qcom: Add SPI driver support for GENI based QUP") Konrad > Konrad >> >> >> Thank you, >> >> Vijay/ >> >> >> >>> >>> Konrad >>> >>>> drivers/spi/spi-geni-qcom.c | 2 +- >>>> 1 file changed, 1 insertion(+), 1 deletion(-) >>>> >>>> diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c >>>> index ba7be50..8a7d1c2 100644 >>>> --- a/drivers/spi/spi-geni-qcom.c >>>> +++ b/drivers/spi/spi-geni-qcom.c >>>> @@ -35,7 +35,7 @@ >>>> #define CS_DEMUX_OUTPUT_SEL GENMASK(3, 0) >>>> #define SE_SPI_TRANS_CFG 0x25c >>>> -#define CS_TOGGLE BIT(0) >>>> +#define CS_TOGGLE BIT(1) >>>> #define SE_SPI_WORD_LEN 0x268 >>>> #define WORD_LEN_MSK GENMASK(9, 0)
On Tue, 25 Apr 2023 14:12:08 +0530, Vijaya Krishna Nivarthi wrote: > The CS_TOGGLE bit when set is supposed to instruct FW to > toggle CS line between words. The driver with intent of > disabling this behaviour has been unsetting BIT(0). This has > not caused any trouble so far because the original BIT(1) > is untouched and BIT(0) likely wasn't being used. > > Correct this to prevent a potential future bug. > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next Thanks! [1/1] spi: spi-geni-qcom: Correct CS_TOGGLE bit in SPI_TRANS_CFG commit: 5fd7c99ecf45c8ee8a9b1268f0ffc91cc6271da2 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c index ba7be50..8a7d1c2 100644 --- a/drivers/spi/spi-geni-qcom.c +++ b/drivers/spi/spi-geni-qcom.c @@ -35,7 +35,7 @@ #define CS_DEMUX_OUTPUT_SEL GENMASK(3, 0) #define SE_SPI_TRANS_CFG 0x25c -#define CS_TOGGLE BIT(0) +#define CS_TOGGLE BIT(1) #define SE_SPI_WORD_LEN 0x268 #define WORD_LEN_MSK GENMASK(9, 0)
The CS_TOGGLE bit when set is supposed to instruct FW to toggle CS line between words. The driver with intent of disabling this behaviour has been unsetting BIT(0). This has not caused any trouble so far because the original BIT(1) is untouched and BIT(0) likely wasn't being used. Correct this to prevent a potential future bug. Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com> --- drivers/spi/spi-geni-qcom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)