@@ -89,6 +89,7 @@
/* PARF_PM_CTRL register fields */
#define PARF_PM_CTRL_REQ_EXIT_L1 BIT(1)
#define PARF_PM_CTRL_READY_ENTR_L23 BIT(2)
+#define PARF_PM_CTRL_XMT_PME BIT(4)
#define PARF_PM_CTRL_REQ_NOT_ENTR_L1 BIT(5)
/* PARF_MHI_CLOCK_RESET_CTRL fields */
@@ -729,10 +730,37 @@ static void qcom_pcie_ep_init(struct dw_pcie_ep *ep)
dw_pcie_ep_reset_bar(pci, bar);
}
+static bool qcom_pcie_ep_wakeup_host(struct dw_pcie_ep *ep, u8 func_no,
+ enum pci_epc_wakeup_host_type type)
+{
+ struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+ struct qcom_pcie_ep *pcie_ep = to_pcie_ep(pci);
+ struct device *dev = pci->dev;
+ u32 val;
+
+ if (type == PCI_WAKEUP_TOGGLE_WAKE) {
+ dev_dbg(dev, "Waking up the host by toggling WAKE#\n");
+ gpiod_set_value_cansleep(pcie_ep->wake, 1);
+ usleep_range(WAKE_DELAY_US, WAKE_DELAY_US + 500);
+ gpiod_set_value_cansleep(pcie_ep->wake, 0);
+
+ } else if (type == PCI_WAKEUP_SEND_PME) {
+ dev_dbg(dev, "Waking up the host using PME\n");
+ val = readl_relaxed(pcie_ep->parf + PARF_PM_CTRL);
+ writel_relaxed(val | PARF_PM_CTRL_XMT_PME, pcie_ep->parf + PARF_PM_CTRL);
+ writel_relaxed(val, pcie_ep->parf + PARF_PM_CTRL);
+
+ } else
+ return false;
+
+ return true;
+}
+
static const struct dw_pcie_ep_ops pci_ep_ops = {
.ep_init = qcom_pcie_ep_init,
.raise_irq = qcom_pcie_ep_raise_irq,
.get_features = qcom_pcie_epc_get_features,
+ .wakeup_host = qcom_pcie_ep_wakeup_host,
};
static int qcom_pcie_ep_probe(struct platform_device *pdev)
Add wakeup host op to dw_pcie_ep_ops to wake up host. If the wakeup type is PME, then trigger inband PME by writing to the PARF PARF_PM_CTRL register, otherwise toggle #WAKE. Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> --- drivers/pci/controller/dwc/pcie-qcom-ep.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)