diff mbox series

[1/4] spi: spi-qcom-qspi: Ignore disabled interrupts' status in isr

Message ID 1690285689-30233-2-git-send-email-quic_vnivarth@quicinc.com (mailing list archive)
State Not Applicable
Headers show
Series spi: spi-qcom-qspi: Follow-up patches to DMA mode support | expand

Commit Message

Vijaya Krishna Nivarthi July 25, 2023, 11:48 a.m. UTC
During FIFO/DMA modes dynamic switching, only corresponding interrupts are
enabled. However its possible that FIFO related interrupt status registers
get set during DMA mode. For example WR_FIFO_EMPTY bit is set during DMA
TX.

Ignore such status bits so that they don't trip unwanted operations.

Suggested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
---
 drivers/spi/spi-qcom-qspi.c | 3 +++
 1 file changed, 3 insertions(+)

Comments

Doug Anderson July 25, 2023, 5:57 p.m. UTC | #1
Hi,

On Tue, Jul 25, 2023 at 4:48 AM Vijaya Krishna Nivarthi
<quic_vnivarth@quicinc.com> wrote:
>
> During FIFO/DMA modes dynamic switching, only corresponding interrupts are
> enabled. However its possible that FIFO related interrupt status registers
> get set during DMA mode. For example WR_FIFO_EMPTY bit is set during DMA
> TX.
>
> Ignore such status bits so that they don't trip unwanted operations.
>
> Suggested-by: Douglas Anderson <dianders@chromium.org>
> Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
> ---
>  drivers/spi/spi-qcom-qspi.c | 3 +++
>  1 file changed, 3 insertions(+)

Things are pretty broken without this fix, so it definitely needs a
Fixes tag so it can find its way to mainline as soon as possible:

Fixes: b5762d95607e ("spi: spi-qcom-qspi: Add DMA mode support")

Looks good to me and also works fixes the problem for me. Thus I'm
happy with any of these tags:

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
diff mbox series

Patch

diff --git a/drivers/spi/spi-qcom-qspi.c b/drivers/spi/spi-qcom-qspi.c
index a0ad980..b995542 100644
--- a/drivers/spi/spi-qcom-qspi.c
+++ b/drivers/spi/spi-qcom-qspi.c
@@ -603,6 +603,9 @@  static irqreturn_t qcom_qspi_irq(int irq, void *dev_id)
 	int_status = readl(ctrl->base + MSTR_INT_STATUS);
 	writel(int_status, ctrl->base + MSTR_INT_STATUS);
 
+	/* Ignore disabled interrupts */
+	int_status &= readl(ctrl->base + MSTR_INT_EN);
+
 	/* PIO mode handling */
 	if (ctrl->xfer.dir == QSPI_WRITE) {
 		if (int_status & WR_FIFO_EMPTY)