diff mbox series

[v2,3/3] arm64: dts: qcom: sdx75-idp: Enable USB3 and PHY support

Message ID 1695720564-2978-4-git-send-email-quic_rohiagar@quicinc.com (mailing list archive)
State Superseded
Headers show
Series Add devicetree support of Interconnects and USB for SDX75 | expand

Commit Message

Rohit Agarwal Sept. 26, 2023, 9:29 a.m. UTC 
Enable the support for USB3 controller, QMP PHY and HS PHY
on SDX75 IDP.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sdx75-idp.dts | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

Comments

Konrad Dybcio Sept. 27, 2023, 10:48 a.m. UTC | #1 
On 26.09.2023 11:29, Rohit Agarwal wrote:
> Enable the support for USB3 controller, QMP PHY and HS PHY
> on SDX75 IDP.
> 
> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
index 10d1587..5f2ebe3 100644
--- a/arch/arm64/boot/dts/qcom/sdx75-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
@@ -250,6 +250,11 @@ 
 	stdout-path = "serial0:115200n8";
 };
 
+&pm7550ba_eusb2_repeater {
+	vdd18-supply = <&vreg_l5b_1p776>;
+	vdd3-supply = <&vreg_l10b_3p08>;
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -261,3 +266,27 @@ 
 &uart1 {
 	status = "okay";
 };
+
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	dr_mode = "peripheral";
+};
+
+&usb_hsphy {
+	vdd-supply = <&vreg_l4b_0p88>;
+	vdda12-supply = <&vreg_l1b_1p2>;
+
+	phys = <&pm7550ba_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&vreg_l4b_0p88>;
+	vdda-pll-supply = <&vreg_l1b_1p2>;
+
+	status = "okay";
+};