diff mbox series

[v4,2/4] bus: mhi: host: Drop chan lock before queuing buffers

Message ID 1699939661-7385-3-git-send-email-quic_qianyu@quicinc.com (mailing list archive)
State Superseded
Headers show
Series bus: mhi: host: Add lock to avoid race when ringing channel DB | expand

Commit Message

Qiang Yu Nov. 14, 2023, 5:27 a.m. UTC
Ensure read and write locks for the channel are not taken in succession by
dropping the read lock from parse_xfer_event() such that a callback given
to client can potentially queue buffers and acquire the write lock in that
process. Any queueing of buffers should be done without channel read lock
acquired as it can result in multiple locks and a soft lockup.

Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
---
 drivers/bus/mhi/host/main.c | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Manivannan Sadhasivam Nov. 24, 2023, 10:04 a.m. UTC | #1
On Tue, Nov 14, 2023 at 01:27:39PM +0800, Qiang Yu wrote:
> Ensure read and write locks for the channel are not taken in succession by
> dropping the read lock from parse_xfer_event() such that a callback given
> to client can potentially queue buffers and acquire the write lock in that
> process. Any queueing of buffers should be done without channel read lock
> acquired as it can result in multiple locks and a soft lockup.
> 

Is this patch trying to fix an existing issue in client drivers or a potential
issue in the future drivers?

Even if you take care of disabled channels, "mhi_event->lock" acquired during
mhi_mark_stale_events() can cause deadlock, since event lock is already held by
mhi_ev_task().

I'd prefer not to open the window unless this patch is fixing a real issue.

- Mani

> Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
> ---
>  drivers/bus/mhi/host/main.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/bus/mhi/host/main.c b/drivers/bus/mhi/host/main.c
> index 6c6d253..c4215b0 100644
> --- a/drivers/bus/mhi/host/main.c
> +++ b/drivers/bus/mhi/host/main.c
> @@ -642,6 +642,8 @@ static int parse_xfer_event(struct mhi_controller *mhi_cntrl,
>  			mhi_del_ring_element(mhi_cntrl, tre_ring);
>  			local_rp = tre_ring->rp;
>  
> +			read_unlock_bh(&mhi_chan->lock);
> +
>  			/* notify client */
>  			mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
>  
> @@ -667,6 +669,8 @@ static int parse_xfer_event(struct mhi_controller *mhi_cntrl,
>  					kfree(buf_info->cb_buf);
>  				}
>  			}
> +
> +			read_lock_bh(&mhi_chan->lock);
>  		}
>  		break;
>  	} /* CC_EOT */
> -- 
> 2.7.4
> 
>
Qiang Yu Nov. 27, 2023, 7:12 a.m. UTC | #2
On 11/24/2023 6:04 PM, Manivannan Sadhasivam wrote:
> On Tue, Nov 14, 2023 at 01:27:39PM +0800, Qiang Yu wrote:
>> Ensure read and write locks for the channel are not taken in succession by
>> dropping the read lock from parse_xfer_event() such that a callback given
>> to client can potentially queue buffers and acquire the write lock in that
>> process. Any queueing of buffers should be done without channel read lock
>> acquired as it can result in multiple locks and a soft lockup.
>>
> Is this patch trying to fix an existing issue in client drivers or a potential
> issue in the future drivers?
>
> Even if you take care of disabled channels, "mhi_event->lock" acquired during
> mhi_mark_stale_events() can cause deadlock, since event lock is already held by
> mhi_ev_task().
>
> I'd prefer not to open the window unless this patch is fixing a real issue.
>
> - Mani
In [PATCH v4 1/4] bus: mhi: host: Add spinlock to protect WP access when 
queueing
TREs,  we add 
write_lock_bh(&mhi_chan->lock)/write_unlock_bh(&mhi_chan->lock)
in mhi_gen_tre, which may be invoked as part of mhi_queue in client xfer 
callback,
so we have to use read_unlock_bh(&mhi_chan->lock) here to avoid 
acquiring mhi_chan->lock
twice.

Sorry for confusing you. Do you think we need to sqush this two patch 
into one?
>
>> Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
>> ---
>>   drivers/bus/mhi/host/main.c | 4 ++++
>>   1 file changed, 4 insertions(+)
>>
>> diff --git a/drivers/bus/mhi/host/main.c b/drivers/bus/mhi/host/main.c
>> index 6c6d253..c4215b0 100644
>> --- a/drivers/bus/mhi/host/main.c
>> +++ b/drivers/bus/mhi/host/main.c
>> @@ -642,6 +642,8 @@ static int parse_xfer_event(struct mhi_controller *mhi_cntrl,
>>   			mhi_del_ring_element(mhi_cntrl, tre_ring);
>>   			local_rp = tre_ring->rp;
>>   
>> +			read_unlock_bh(&mhi_chan->lock);
>> +
>>   			/* notify client */
>>   			mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
>>   
>> @@ -667,6 +669,8 @@ static int parse_xfer_event(struct mhi_controller *mhi_cntrl,
>>   					kfree(buf_info->cb_buf);
>>   				}
>>   			}
>> +
>> +			read_lock_bh(&mhi_chan->lock);
>>   		}
>>   		break;
>>   	} /* CC_EOT */
>> -- 
>> 2.7.4
>>
>>
Qiang Yu Nov. 27, 2023, 7:13 a.m. UTC | #3
On 11/24/2023 6:04 PM, Manivannan Sadhasivam wrote:
> On Tue, Nov 14, 2023 at 01:27:39PM +0800, Qiang Yu wrote:
>> Ensure read and write locks for the channel are not taken in succession by
>> dropping the read lock from parse_xfer_event() such that a callback given
>> to client can potentially queue buffers and acquire the write lock in that
>> process. Any queueing of buffers should be done without channel read lock
>> acquired as it can result in multiple locks and a soft lockup.
>>
> Is this patch trying to fix an existing issue in client drivers or a potential
> issue in the future drivers?
>
> Even if you take care of disabled channels, "mhi_event->lock" acquired during
> mhi_mark_stale_events() can cause deadlock, since event lock is already held by
> mhi_ev_task().
>
> I'd prefer not to open the window unless this patch is fixing a real issue.
>
> - Mani
In [PATCH v4 1/4] bus: mhi: host: Add spinlock to protect WP access when 
queueing
TREs,  we add 
write_lock_bh(&mhi_chan->lock)/write_unlock_bh(&mhi_chan->lock)
in mhi_gen_tre, which may be invoked as part of mhi_queue in client xfer 
callback,
so we have to use read_unlock_bh(&mhi_chan->lock) here to avoid 
acquiring mhi_chan->lock
twice.

Sorry for confusing you. Do you think we need to sqush this two patch 
into one?
>> Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
>> ---
>>   drivers/bus/mhi/host/main.c | 4 ++++
>>   1 file changed, 4 insertions(+)
>>
>> diff --git a/drivers/bus/mhi/host/main.c b/drivers/bus/mhi/host/main.c
>> index 6c6d253..c4215b0 100644
>> --- a/drivers/bus/mhi/host/main.c
>> +++ b/drivers/bus/mhi/host/main.c
>> @@ -642,6 +642,8 @@ static int parse_xfer_event(struct mhi_controller *mhi_cntrl,
>>   			mhi_del_ring_element(mhi_cntrl, tre_ring);
>>   			local_rp = tre_ring->rp;
>>   
>> +			read_unlock_bh(&mhi_chan->lock);
>> +
>>   			/* notify client */
>>   			mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
>>   
>> @@ -667,6 +669,8 @@ static int parse_xfer_event(struct mhi_controller *mhi_cntrl,
>>   					kfree(buf_info->cb_buf);
>>   				}
>>   			}
>> +
>> +			read_lock_bh(&mhi_chan->lock);
>>   		}
>>   		break;
>>   	} /* CC_EOT */
>> -- 
>> 2.7.4
>>
>>
Manivannan Sadhasivam Nov. 28, 2023, 1:32 p.m. UTC | #4
On Mon, Nov 27, 2023 at 03:13:55PM +0800, Qiang Yu wrote:
> 
> On 11/24/2023 6:04 PM, Manivannan Sadhasivam wrote:
> > On Tue, Nov 14, 2023 at 01:27:39PM +0800, Qiang Yu wrote:
> > > Ensure read and write locks for the channel are not taken in succession by
> > > dropping the read lock from parse_xfer_event() such that a callback given
> > > to client can potentially queue buffers and acquire the write lock in that
> > > process. Any queueing of buffers should be done without channel read lock
> > > acquired as it can result in multiple locks and a soft lockup.
> > > 
> > Is this patch trying to fix an existing issue in client drivers or a potential
> > issue in the future drivers?
> > 
> > Even if you take care of disabled channels, "mhi_event->lock" acquired during
> > mhi_mark_stale_events() can cause deadlock, since event lock is already held by
> > mhi_ev_task().
> > 
> > I'd prefer not to open the window unless this patch is fixing a real issue.
> > 
> > - Mani
> In [PATCH v4 1/4] bus: mhi: host: Add spinlock to protect WP access when
> queueing
> TREs,  we add
> write_lock_bh(&mhi_chan->lock)/write_unlock_bh(&mhi_chan->lock)
> in mhi_gen_tre, which may be invoked as part of mhi_queue in client xfer
> callback,
> so we have to use read_unlock_bh(&mhi_chan->lock) here to avoid acquiring
> mhi_chan->lock
> twice.
> 
> Sorry for confusing you. Do you think we need to sqush this two patch into
> one?

Well, if patch 1 is introducing a potential deadlock, then we should fix patch
1 itself and not introduce a follow up patch.

But there is one more issue that I pointed out in my previous reply.

Also, I'm planning to cleanup the locking mess within MHI in the coming days.
Perhaps we can revisit this series at that point of time. Will that be OK for
you?

- Mani

> > > Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
> > > ---
> > >   drivers/bus/mhi/host/main.c | 4 ++++
> > >   1 file changed, 4 insertions(+)
> > > 
> > > diff --git a/drivers/bus/mhi/host/main.c b/drivers/bus/mhi/host/main.c
> > > index 6c6d253..c4215b0 100644
> > > --- a/drivers/bus/mhi/host/main.c
> > > +++ b/drivers/bus/mhi/host/main.c
> > > @@ -642,6 +642,8 @@ static int parse_xfer_event(struct mhi_controller *mhi_cntrl,
> > >   			mhi_del_ring_element(mhi_cntrl, tre_ring);
> > >   			local_rp = tre_ring->rp;
> > > +			read_unlock_bh(&mhi_chan->lock);
> > > +
> > >   			/* notify client */
> > >   			mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
> > > @@ -667,6 +669,8 @@ static int parse_xfer_event(struct mhi_controller *mhi_cntrl,
> > >   					kfree(buf_info->cb_buf);
> > >   				}
> > >   			}
> > > +
> > > +			read_lock_bh(&mhi_chan->lock);
> > >   		}
> > >   		break;
> > >   	} /* CC_EOT */
> > > -- 
> > > 2.7.4
> > > 
> > > 
>
Qiang Yu Nov. 29, 2023, 3:29 a.m. UTC | #5
On 11/28/2023 9:32 PM, Manivannan Sadhasivam wrote:
> On Mon, Nov 27, 2023 at 03:13:55PM +0800, Qiang Yu wrote:
>> On 11/24/2023 6:04 PM, Manivannan Sadhasivam wrote:
>>> On Tue, Nov 14, 2023 at 01:27:39PM +0800, Qiang Yu wrote:
>>>> Ensure read and write locks for the channel are not taken in succession by
>>>> dropping the read lock from parse_xfer_event() such that a callback given
>>>> to client can potentially queue buffers and acquire the write lock in that
>>>> process. Any queueing of buffers should be done without channel read lock
>>>> acquired as it can result in multiple locks and a soft lockup.
>>>>
>>> Is this patch trying to fix an existing issue in client drivers or a potential
>>> issue in the future drivers?
>>>
>>> Even if you take care of disabled channels, "mhi_event->lock" acquired during
>>> mhi_mark_stale_events() can cause deadlock, since event lock is already held by
>>> mhi_ev_task().
>>>
>>> I'd prefer not to open the window unless this patch is fixing a real issue.
>>>
>>> - Mani
>> In [PATCH v4 1/4] bus: mhi: host: Add spinlock to protect WP access when
>> queueing
>> TREs,  we add
>> write_lock_bh(&mhi_chan->lock)/write_unlock_bh(&mhi_chan->lock)
>> in mhi_gen_tre, which may be invoked as part of mhi_queue in client xfer
>> callback,
>> so we have to use read_unlock_bh(&mhi_chan->lock) here to avoid acquiring
>> mhi_chan->lock
>> twice.
>>
>> Sorry for confusing you. Do you think we need to sqush this two patch into
>> one?
> Well, if patch 1 is introducing a potential deadlock, then we should fix patch
> 1 itself and not introduce a follow up patch.
>
> But there is one more issue that I pointed out in my previous reply.
Sorry, I can not understand why "mhi_event->lock" acquired during
mhi_mark_stale_events() can cause deadlock. In mhi_ev_task(), we will
not invoke mhi_mark_stale_events(). Can you provide some interpretation?
>
> Also, I'm planning to cleanup the locking mess within MHI in the coming days.
> Perhaps we can revisit this series at that point of time. Will that be OK for
> you?
Sure, that will be great.
>
> - Mani
>
>>>> Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
>>>> ---
>>>>    drivers/bus/mhi/host/main.c | 4 ++++
>>>>    1 file changed, 4 insertions(+)
>>>>
>>>> diff --git a/drivers/bus/mhi/host/main.c b/drivers/bus/mhi/host/main.c
>>>> index 6c6d253..c4215b0 100644
>>>> --- a/drivers/bus/mhi/host/main.c
>>>> +++ b/drivers/bus/mhi/host/main.c
>>>> @@ -642,6 +642,8 @@ static int parse_xfer_event(struct mhi_controller *mhi_cntrl,
>>>>    			mhi_del_ring_element(mhi_cntrl, tre_ring);
>>>>    			local_rp = tre_ring->rp;
>>>> +			read_unlock_bh(&mhi_chan->lock);
>>>> +
>>>>    			/* notify client */
>>>>    			mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
>>>> @@ -667,6 +669,8 @@ static int parse_xfer_event(struct mhi_controller *mhi_cntrl,
>>>>    					kfree(buf_info->cb_buf);
>>>>    				}
>>>>    			}
>>>> +
>>>> +			read_lock_bh(&mhi_chan->lock);
>>>>    		}
>>>>    		break;
>>>>    	} /* CC_EOT */
>>>> -- 
>>>> 2.7.4
>>>>
>>>>
Manivannan Sadhasivam Nov. 30, 2023, 5:31 a.m. UTC | #6
On Wed, Nov 29, 2023 at 11:29:07AM +0800, Qiang Yu wrote:
> 
> On 11/28/2023 9:32 PM, Manivannan Sadhasivam wrote:
> > On Mon, Nov 27, 2023 at 03:13:55PM +0800, Qiang Yu wrote:
> > > On 11/24/2023 6:04 PM, Manivannan Sadhasivam wrote:
> > > > On Tue, Nov 14, 2023 at 01:27:39PM +0800, Qiang Yu wrote:
> > > > > Ensure read and write locks for the channel are not taken in succession by
> > > > > dropping the read lock from parse_xfer_event() such that a callback given
> > > > > to client can potentially queue buffers and acquire the write lock in that
> > > > > process. Any queueing of buffers should be done without channel read lock
> > > > > acquired as it can result in multiple locks and a soft lockup.
> > > > > 
> > > > Is this patch trying to fix an existing issue in client drivers or a potential
> > > > issue in the future drivers?
> > > > 
> > > > Even if you take care of disabled channels, "mhi_event->lock" acquired during
> > > > mhi_mark_stale_events() can cause deadlock, since event lock is already held by
> > > > mhi_ev_task().
> > > > 
> > > > I'd prefer not to open the window unless this patch is fixing a real issue.
> > > > 
> > > > - Mani
> > > In [PATCH v4 1/4] bus: mhi: host: Add spinlock to protect WP access when
> > > queueing
> > > TREs,  we add
> > > write_lock_bh(&mhi_chan->lock)/write_unlock_bh(&mhi_chan->lock)
> > > in mhi_gen_tre, which may be invoked as part of mhi_queue in client xfer
> > > callback,
> > > so we have to use read_unlock_bh(&mhi_chan->lock) here to avoid acquiring
> > > mhi_chan->lock
> > > twice.
> > > 
> > > Sorry for confusing you. Do you think we need to sqush this two patch into
> > > one?
> > Well, if patch 1 is introducing a potential deadlock, then we should fix patch
> > 1 itself and not introduce a follow up patch.
> > 
> > But there is one more issue that I pointed out in my previous reply.
> Sorry, I can not understand why "mhi_event->lock" acquired during
> mhi_mark_stale_events() can cause deadlock. In mhi_ev_task(), we will
> not invoke mhi_mark_stale_events(). Can you provide some interpretation?

Going by your theory that if a channel gets disabled while processing the event,
the process trying to disable the channel will try to acquire "mhi_event->lock"
which is already held by the process processing the event.

- Mani

> > 
> > Also, I'm planning to cleanup the locking mess within MHI in the coming days.
> > Perhaps we can revisit this series at that point of time. Will that be OK for
> > you?
> Sure, that will be great.
> > 
> > - Mani
> > 
> > > > > Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
> > > > > ---
> > > > >    drivers/bus/mhi/host/main.c | 4 ++++
> > > > >    1 file changed, 4 insertions(+)
> > > > > 
> > > > > diff --git a/drivers/bus/mhi/host/main.c b/drivers/bus/mhi/host/main.c
> > > > > index 6c6d253..c4215b0 100644
> > > > > --- a/drivers/bus/mhi/host/main.c
> > > > > +++ b/drivers/bus/mhi/host/main.c
> > > > > @@ -642,6 +642,8 @@ static int parse_xfer_event(struct mhi_controller *mhi_cntrl,
> > > > >    			mhi_del_ring_element(mhi_cntrl, tre_ring);
> > > > >    			local_rp = tre_ring->rp;
> > > > > +			read_unlock_bh(&mhi_chan->lock);
> > > > > +
> > > > >    			/* notify client */
> > > > >    			mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
> > > > > @@ -667,6 +669,8 @@ static int parse_xfer_event(struct mhi_controller *mhi_cntrl,
> > > > >    					kfree(buf_info->cb_buf);
> > > > >    				}
> > > > >    			}
> > > > > +
> > > > > +			read_lock_bh(&mhi_chan->lock);
> > > > >    		}
> > > > >    		break;
> > > > >    	} /* CC_EOT */
> > > > > -- 
> > > > > 2.7.4
> > > > > 
> > > > > 
>
Qiang Yu Dec. 6, 2023, 2:25 a.m. UTC | #7
On 11/30/2023 1:31 PM, Manivannan Sadhasivam wrote:
> On Wed, Nov 29, 2023 at 11:29:07AM +0800, Qiang Yu wrote:
>> On 11/28/2023 9:32 PM, Manivannan Sadhasivam wrote:
>>> On Mon, Nov 27, 2023 at 03:13:55PM +0800, Qiang Yu wrote:
>>>> On 11/24/2023 6:04 PM, Manivannan Sadhasivam wrote:
>>>>> On Tue, Nov 14, 2023 at 01:27:39PM +0800, Qiang Yu wrote:
>>>>>> Ensure read and write locks for the channel are not taken in succession by
>>>>>> dropping the read lock from parse_xfer_event() such that a callback given
>>>>>> to client can potentially queue buffers and acquire the write lock in that
>>>>>> process. Any queueing of buffers should be done without channel read lock
>>>>>> acquired as it can result in multiple locks and a soft lockup.
>>>>>>
>>>>> Is this patch trying to fix an existing issue in client drivers or a potential
>>>>> issue in the future drivers?
>>>>>
>>>>> Even if you take care of disabled channels, "mhi_event->lock" acquired during
>>>>> mhi_mark_stale_events() can cause deadlock, since event lock is already held by
>>>>> mhi_ev_task().
>>>>>
>>>>> I'd prefer not to open the window unless this patch is fixing a real issue.
>>>>>
>>>>> - Mani
>>>> In [PATCH v4 1/4] bus: mhi: host: Add spinlock to protect WP access when
>>>> queueing
>>>> TREs,  we add
>>>> write_lock_bh(&mhi_chan->lock)/write_unlock_bh(&mhi_chan->lock)
>>>> in mhi_gen_tre, which may be invoked as part of mhi_queue in client xfer
>>>> callback,
>>>> so we have to use read_unlock_bh(&mhi_chan->lock) here to avoid acquiring
>>>> mhi_chan->lock
>>>> twice.
>>>>
>>>> Sorry for confusing you. Do you think we need to sqush this two patch into
>>>> one?
>>> Well, if patch 1 is introducing a potential deadlock, then we should fix patch
>>> 1 itself and not introduce a follow up patch.
>>>
>>> But there is one more issue that I pointed out in my previous reply.
>> Sorry, I can not understand why "mhi_event->lock" acquired during
>> mhi_mark_stale_events() can cause deadlock. In mhi_ev_task(), we will
>> not invoke mhi_mark_stale_events(). Can you provide some interpretation?
> Going by your theory that if a channel gets disabled while processing the event,
> the process trying to disable the channel will try to acquire "mhi_event->lock"
> which is already held by the process processing the event.
>
> - Mani
OK, I get you. Thank you for kind explanation. Hopefully I didn't 
intrude too much.
>
>>> Also, I'm planning to cleanup the locking mess within MHI in the coming days.
>>> Perhaps we can revisit this series at that point of time. Will that be OK for
>>> you?
>> Sure, that will be great.
>>> - Mani
>>>
>>>>>> Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
>>>>>> ---
>>>>>>     drivers/bus/mhi/host/main.c | 4 ++++
>>>>>>     1 file changed, 4 insertions(+)
>>>>>>
>>>>>> diff --git a/drivers/bus/mhi/host/main.c b/drivers/bus/mhi/host/main.c
>>>>>> index 6c6d253..c4215b0 100644
>>>>>> --- a/drivers/bus/mhi/host/main.c
>>>>>> +++ b/drivers/bus/mhi/host/main.c
>>>>>> @@ -642,6 +642,8 @@ static int parse_xfer_event(struct mhi_controller *mhi_cntrl,
>>>>>>     			mhi_del_ring_element(mhi_cntrl, tre_ring);
>>>>>>     			local_rp = tre_ring->rp;
>>>>>> +			read_unlock_bh(&mhi_chan->lock);
>>>>>> +
>>>>>>     			/* notify client */
>>>>>>     			mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
>>>>>> @@ -667,6 +669,8 @@ static int parse_xfer_event(struct mhi_controller *mhi_cntrl,
>>>>>>     					kfree(buf_info->cb_buf);
>>>>>>     				}
>>>>>>     			}
>>>>>> +
>>>>>> +			read_lock_bh(&mhi_chan->lock);
>>>>>>     		}
>>>>>>     		break;
>>>>>>     	} /* CC_EOT */
>>>>>> -- 
>>>>>> 2.7.4
>>>>>>
>>>>>>
Manivannan Sadhasivam Dec. 6, 2023, 1:48 p.m. UTC | #8
On Wed, Dec 06, 2023 at 10:25:12AM +0800, Qiang Yu wrote:
> 
> On 11/30/2023 1:31 PM, Manivannan Sadhasivam wrote:
> > On Wed, Nov 29, 2023 at 11:29:07AM +0800, Qiang Yu wrote:
> > > On 11/28/2023 9:32 PM, Manivannan Sadhasivam wrote:
> > > > On Mon, Nov 27, 2023 at 03:13:55PM +0800, Qiang Yu wrote:
> > > > > On 11/24/2023 6:04 PM, Manivannan Sadhasivam wrote:
> > > > > > On Tue, Nov 14, 2023 at 01:27:39PM +0800, Qiang Yu wrote:
> > > > > > > Ensure read and write locks for the channel are not taken in succession by
> > > > > > > dropping the read lock from parse_xfer_event() such that a callback given
> > > > > > > to client can potentially queue buffers and acquire the write lock in that
> > > > > > > process. Any queueing of buffers should be done without channel read lock
> > > > > > > acquired as it can result in multiple locks and a soft lockup.
> > > > > > > 
> > > > > > Is this patch trying to fix an existing issue in client drivers or a potential
> > > > > > issue in the future drivers?
> > > > > > 
> > > > > > Even if you take care of disabled channels, "mhi_event->lock" acquired during
> > > > > > mhi_mark_stale_events() can cause deadlock, since event lock is already held by
> > > > > > mhi_ev_task().
> > > > > > 
> > > > > > I'd prefer not to open the window unless this patch is fixing a real issue.
> > > > > > 
> > > > > > - Mani
> > > > > In [PATCH v4 1/4] bus: mhi: host: Add spinlock to protect WP access when
> > > > > queueing
> > > > > TREs,  we add
> > > > > write_lock_bh(&mhi_chan->lock)/write_unlock_bh(&mhi_chan->lock)
> > > > > in mhi_gen_tre, which may be invoked as part of mhi_queue in client xfer
> > > > > callback,
> > > > > so we have to use read_unlock_bh(&mhi_chan->lock) here to avoid acquiring
> > > > > mhi_chan->lock
> > > > > twice.
> > > > > 
> > > > > Sorry for confusing you. Do you think we need to sqush this two patch into
> > > > > one?
> > > > Well, if patch 1 is introducing a potential deadlock, then we should fix patch
> > > > 1 itself and not introduce a follow up patch.
> > > > 
> > > > But there is one more issue that I pointed out in my previous reply.
> > > Sorry, I can not understand why "mhi_event->lock" acquired during
> > > mhi_mark_stale_events() can cause deadlock. In mhi_ev_task(), we will
> > > not invoke mhi_mark_stale_events(). Can you provide some interpretation?
> > Going by your theory that if a channel gets disabled while processing the event,
> > the process trying to disable the channel will try to acquire "mhi_event->lock"
> > which is already held by the process processing the event.
> > 
> > - Mani
> OK, I get you. Thank you for kind explanation. Hopefully I didn't intrude
> too much.

Not at all. Btw, did you actually encounter any issue that this patch is trying
to fix? Or just fixing based on code inspection.

- Mani

> > 
> > > > Also, I'm planning to cleanup the locking mess within MHI in the coming days.
> > > > Perhaps we can revisit this series at that point of time. Will that be OK for
> > > > you?
> > > Sure, that will be great.
> > > > - Mani
> > > > 
> > > > > > > Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
> > > > > > > ---
> > > > > > >     drivers/bus/mhi/host/main.c | 4 ++++
> > > > > > >     1 file changed, 4 insertions(+)
> > > > > > > 
> > > > > > > diff --git a/drivers/bus/mhi/host/main.c b/drivers/bus/mhi/host/main.c
> > > > > > > index 6c6d253..c4215b0 100644
> > > > > > > --- a/drivers/bus/mhi/host/main.c
> > > > > > > +++ b/drivers/bus/mhi/host/main.c
> > > > > > > @@ -642,6 +642,8 @@ static int parse_xfer_event(struct mhi_controller *mhi_cntrl,
> > > > > > >     			mhi_del_ring_element(mhi_cntrl, tre_ring);
> > > > > > >     			local_rp = tre_ring->rp;
> > > > > > > +			read_unlock_bh(&mhi_chan->lock);
> > > > > > > +
> > > > > > >     			/* notify client */
> > > > > > >     			mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
> > > > > > > @@ -667,6 +669,8 @@ static int parse_xfer_event(struct mhi_controller *mhi_cntrl,
> > > > > > >     					kfree(buf_info->cb_buf);
> > > > > > >     				}
> > > > > > >     			}
> > > > > > > +
> > > > > > > +			read_lock_bh(&mhi_chan->lock);
> > > > > > >     		}
> > > > > > >     		break;
> > > > > > >     	} /* CC_EOT */
> > > > > > > -- 
> > > > > > > 2.7.4
> > > > > > > 
> > > > > > >
Qiang Yu Dec. 7, 2023, 5:25 a.m. UTC | #9
On 12/6/2023 9:48 PM, Manivannan Sadhasivam wrote:
> On Wed, Dec 06, 2023 at 10:25:12AM +0800, Qiang Yu wrote:
>> On 11/30/2023 1:31 PM, Manivannan Sadhasivam wrote:
>>> On Wed, Nov 29, 2023 at 11:29:07AM +0800, Qiang Yu wrote:
>>>> On 11/28/2023 9:32 PM, Manivannan Sadhasivam wrote:
>>>>> On Mon, Nov 27, 2023 at 03:13:55PM +0800, Qiang Yu wrote:
>>>>>> On 11/24/2023 6:04 PM, Manivannan Sadhasivam wrote:
>>>>>>> On Tue, Nov 14, 2023 at 01:27:39PM +0800, Qiang Yu wrote:
>>>>>>>> Ensure read and write locks for the channel are not taken in succession by
>>>>>>>> dropping the read lock from parse_xfer_event() such that a callback given
>>>>>>>> to client can potentially queue buffers and acquire the write lock in that
>>>>>>>> process. Any queueing of buffers should be done without channel read lock
>>>>>>>> acquired as it can result in multiple locks and a soft lockup.
>>>>>>>>
>>>>>>> Is this patch trying to fix an existing issue in client drivers or a potential
>>>>>>> issue in the future drivers?
>>>>>>>
>>>>>>> Even if you take care of disabled channels, "mhi_event->lock" acquired during
>>>>>>> mhi_mark_stale_events() can cause deadlock, since event lock is already held by
>>>>>>> mhi_ev_task().
>>>>>>>
>>>>>>> I'd prefer not to open the window unless this patch is fixing a real issue.
>>>>>>>
>>>>>>> - Mani
>>>>>> In [PATCH v4 1/4] bus: mhi: host: Add spinlock to protect WP access when
>>>>>> queueing
>>>>>> TREs,  we add
>>>>>> write_lock_bh(&mhi_chan->lock)/write_unlock_bh(&mhi_chan->lock)
>>>>>> in mhi_gen_tre, which may be invoked as part of mhi_queue in client xfer
>>>>>> callback,
>>>>>> so we have to use read_unlock_bh(&mhi_chan->lock) here to avoid acquiring
>>>>>> mhi_chan->lock
>>>>>> twice.
>>>>>>
>>>>>> Sorry for confusing you. Do you think we need to sqush this two patch into
>>>>>> one?
>>>>> Well, if patch 1 is introducing a potential deadlock, then we should fix patch
>>>>> 1 itself and not introduce a follow up patch.
>>>>>
>>>>> But there is one more issue that I pointed out in my previous reply.
>>>> Sorry, I can not understand why "mhi_event->lock" acquired during
>>>> mhi_mark_stale_events() can cause deadlock. In mhi_ev_task(), we will
>>>> not invoke mhi_mark_stale_events(). Can you provide some interpretation?
>>> Going by your theory that if a channel gets disabled while processing the event,
>>> the process trying to disable the channel will try to acquire "mhi_event->lock"
>>> which is already held by the process processing the event.
>>>
>>> - Mani
>> OK, I get you. Thank you for kind explanation. Hopefully I didn't intrude
>> too much.
> Not at all. Btw, did you actually encounter any issue that this patch is trying
> to fix? Or just fixing based on code inspection.
>
> - Mani
Yes, we actually meet the race issue in downstream driver. But I can not 
find more details about the issue.
>>>>> Also, I'm planning to cleanup the locking mess within MHI in the coming days.
>>>>> Perhaps we can revisit this series at that point of time. Will that be OK for
>>>>> you?
>>>> Sure, that will be great.
>>>>> - Mani
>>>>>
>>>>>>>> Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
>>>>>>>> ---
>>>>>>>>      drivers/bus/mhi/host/main.c | 4 ++++
>>>>>>>>      1 file changed, 4 insertions(+)
>>>>>>>>
>>>>>>>> diff --git a/drivers/bus/mhi/host/main.c b/drivers/bus/mhi/host/main.c
>>>>>>>> index 6c6d253..c4215b0 100644
>>>>>>>> --- a/drivers/bus/mhi/host/main.c
>>>>>>>> +++ b/drivers/bus/mhi/host/main.c
>>>>>>>> @@ -642,6 +642,8 @@ static int parse_xfer_event(struct mhi_controller *mhi_cntrl,
>>>>>>>>      			mhi_del_ring_element(mhi_cntrl, tre_ring);
>>>>>>>>      			local_rp = tre_ring->rp;
>>>>>>>> +			read_unlock_bh(&mhi_chan->lock);
>>>>>>>> +
>>>>>>>>      			/* notify client */
>>>>>>>>      			mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
>>>>>>>> @@ -667,6 +669,8 @@ static int parse_xfer_event(struct mhi_controller *mhi_cntrl,
>>>>>>>>      					kfree(buf_info->cb_buf);
>>>>>>>>      				}
>>>>>>>>      			}
>>>>>>>> +
>>>>>>>> +			read_lock_bh(&mhi_chan->lock);
>>>>>>>>      		}
>>>>>>>>      		break;
>>>>>>>>      	} /* CC_EOT */
>>>>>>>> -- 
>>>>>>>> 2.7.4
>>>>>>>>
>>>>>>>>
Qiang Yu Dec. 7, 2023, 5:27 a.m. UTC | #10
On 12/6/2023 9:48 PM, Manivannan Sadhasivam wrote:
> On Wed, Dec 06, 2023 at 10:25:12AM +0800, Qiang Yu wrote:
>> On 11/30/2023 1:31 PM, Manivannan Sadhasivam wrote:
>>> On Wed, Nov 29, 2023 at 11:29:07AM +0800, Qiang Yu wrote:
>>>> On 11/28/2023 9:32 PM, Manivannan Sadhasivam wrote:
>>>>> On Mon, Nov 27, 2023 at 03:13:55PM +0800, Qiang Yu wrote:
>>>>>> On 11/24/2023 6:04 PM, Manivannan Sadhasivam wrote:
>>>>>>> On Tue, Nov 14, 2023 at 01:27:39PM +0800, Qiang Yu wrote:
>>>>>>>> Ensure read and write locks for the channel are not taken in succession by
>>>>>>>> dropping the read lock from parse_xfer_event() such that a callback given
>>>>>>>> to client can potentially queue buffers and acquire the write lock in that
>>>>>>>> process. Any queueing of buffers should be done without channel read lock
>>>>>>>> acquired as it can result in multiple locks and a soft lockup.
>>>>>>>>
>>>>>>> Is this patch trying to fix an existing issue in client drivers or a potential
>>>>>>> issue in the future drivers?
>>>>>>>
>>>>>>> Even if you take care of disabled channels, "mhi_event->lock" acquired during
>>>>>>> mhi_mark_stale_events() can cause deadlock, since event lock is already held by
>>>>>>> mhi_ev_task().
>>>>>>>
>>>>>>> I'd prefer not to open the window unless this patch is fixing a real issue.
>>>>>>>
>>>>>>> - Mani
>>>>>> In [PATCH v4 1/4] bus: mhi: host: Add spinlock to protect WP access when
>>>>>> queueing
>>>>>> TREs,  we add
>>>>>> write_lock_bh(&mhi_chan->lock)/write_unlock_bh(&mhi_chan->lock)
>>>>>> in mhi_gen_tre, which may be invoked as part of mhi_queue in client xfer
>>>>>> callback,
>>>>>> so we have to use read_unlock_bh(&mhi_chan->lock) here to avoid acquiring
>>>>>> mhi_chan->lock
>>>>>> twice.
>>>>>>
>>>>>> Sorry for confusing you. Do you think we need to sqush this two patch into
>>>>>> one?
>>>>> Well, if patch 1 is introducing a potential deadlock, then we should fix patch
>>>>> 1 itself and not introduce a follow up patch.
>>>>>
>>>>> But there is one more issue that I pointed out in my previous reply.
>>>> Sorry, I can not understand why "mhi_event->lock" acquired during
>>>> mhi_mark_stale_events() can cause deadlock. In mhi_ev_task(), we will
>>>> not invoke mhi_mark_stale_events(). Can you provide some interpretation?
>>> Going by your theory that if a channel gets disabled while processing the event,
>>> the process trying to disable the channel will try to acquire "mhi_event->lock"
>>> which is already held by the process processing the event.
>>>
>>> - Mani
>> OK, I get you. Thank you for kind explanation. Hopefully I didn't intrude
>> too much.
> Not at all. Btw, did you actually encounter any issue that this patch is trying
> to fix? Or just fixing based on code inspection.
>
> - Mani
Yes, we actually meet the race issue in downstream driver. But I can not 
find more details about the issue.
>>>>> Also, I'm planning to cleanup the locking mess within MHI in the coming days.
>>>>> Perhaps we can revisit this series at that point of time. Will that be OK for
>>>>> you?
>>>> Sure, that will be great.
>>>>> - Mani
>>>>>
>>>>>>>> Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
>>>>>>>> ---
>>>>>>>>      drivers/bus/mhi/host/main.c | 4 ++++
>>>>>>>>      1 file changed, 4 insertions(+)
>>>>>>>>
>>>>>>>> diff --git a/drivers/bus/mhi/host/main.c b/drivers/bus/mhi/host/main.c
>>>>>>>> index 6c6d253..c4215b0 100644
>>>>>>>> --- a/drivers/bus/mhi/host/main.c
>>>>>>>> +++ b/drivers/bus/mhi/host/main.c
>>>>>>>> @@ -642,6 +642,8 @@ static int parse_xfer_event(struct mhi_controller *mhi_cntrl,
>>>>>>>>      			mhi_del_ring_element(mhi_cntrl, tre_ring);
>>>>>>>>      			local_rp = tre_ring->rp;
>>>>>>>> +			read_unlock_bh(&mhi_chan->lock);
>>>>>>>> +
>>>>>>>>      			/* notify client */
>>>>>>>>      			mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
>>>>>>>> @@ -667,6 +669,8 @@ static int parse_xfer_event(struct mhi_controller *mhi_cntrl,
>>>>>>>>      					kfree(buf_info->cb_buf);
>>>>>>>>      				}
>>>>>>>>      			}
>>>>>>>> +
>>>>>>>> +			read_lock_bh(&mhi_chan->lock);
>>>>>>>>      		}
>>>>>>>>      		break;
>>>>>>>>      	} /* CC_EOT */
>>>>>>>> -- 
>>>>>>>> 2.7.4
>>>>>>>>
>>>>>>>>
Manivannan Sadhasivam Dec. 7, 2023, 6:43 a.m. UTC | #11
On Thu, Dec 07, 2023 at 01:27:19PM +0800, Qiang Yu wrote:
> 
> On 12/6/2023 9:48 PM, Manivannan Sadhasivam wrote:
> > On Wed, Dec 06, 2023 at 10:25:12AM +0800, Qiang Yu wrote:
> > > On 11/30/2023 1:31 PM, Manivannan Sadhasivam wrote:
> > > > On Wed, Nov 29, 2023 at 11:29:07AM +0800, Qiang Yu wrote:
> > > > > On 11/28/2023 9:32 PM, Manivannan Sadhasivam wrote:
> > > > > > On Mon, Nov 27, 2023 at 03:13:55PM +0800, Qiang Yu wrote:
> > > > > > > On 11/24/2023 6:04 PM, Manivannan Sadhasivam wrote:
> > > > > > > > On Tue, Nov 14, 2023 at 01:27:39PM +0800, Qiang Yu wrote:
> > > > > > > > > Ensure read and write locks for the channel are not taken in succession by
> > > > > > > > > dropping the read lock from parse_xfer_event() such that a callback given
> > > > > > > > > to client can potentially queue buffers and acquire the write lock in that
> > > > > > > > > process. Any queueing of buffers should be done without channel read lock
> > > > > > > > > acquired as it can result in multiple locks and a soft lockup.
> > > > > > > > > 
> > > > > > > > Is this patch trying to fix an existing issue in client drivers or a potential
> > > > > > > > issue in the future drivers?
> > > > > > > > 
> > > > > > > > Even if you take care of disabled channels, "mhi_event->lock" acquired during
> > > > > > > > mhi_mark_stale_events() can cause deadlock, since event lock is already held by
> > > > > > > > mhi_ev_task().
> > > > > > > > 
> > > > > > > > I'd prefer not to open the window unless this patch is fixing a real issue.
> > > > > > > > 
> > > > > > > > - Mani
> > > > > > > In [PATCH v4 1/4] bus: mhi: host: Add spinlock to protect WP access when
> > > > > > > queueing
> > > > > > > TREs,  we add
> > > > > > > write_lock_bh(&mhi_chan->lock)/write_unlock_bh(&mhi_chan->lock)
> > > > > > > in mhi_gen_tre, which may be invoked as part of mhi_queue in client xfer
> > > > > > > callback,
> > > > > > > so we have to use read_unlock_bh(&mhi_chan->lock) here to avoid acquiring
> > > > > > > mhi_chan->lock
> > > > > > > twice.
> > > > > > > 
> > > > > > > Sorry for confusing you. Do you think we need to sqush this two patch into
> > > > > > > one?
> > > > > > Well, if patch 1 is introducing a potential deadlock, then we should fix patch
> > > > > > 1 itself and not introduce a follow up patch.
> > > > > > 
> > > > > > But there is one more issue that I pointed out in my previous reply.
> > > > > Sorry, I can not understand why "mhi_event->lock" acquired during
> > > > > mhi_mark_stale_events() can cause deadlock. In mhi_ev_task(), we will
> > > > > not invoke mhi_mark_stale_events(). Can you provide some interpretation?
> > > > Going by your theory that if a channel gets disabled while processing the event,
> > > > the process trying to disable the channel will try to acquire "mhi_event->lock"
> > > > which is already held by the process processing the event.
> > > > 
> > > > - Mani
> > > OK, I get you. Thank you for kind explanation. Hopefully I didn't intrude
> > > too much.
> > Not at all. Btw, did you actually encounter any issue that this patch is trying
> > to fix? Or just fixing based on code inspection.
> > 
> > - Mani
> Yes, we actually meet the race issue in downstream driver. But I can not
> find more details about the issue.

Hmm. I think it is OK to accept this patch and ignore the channel disabling
concern since the event lock is in place to prevent that. There would be no
deadlock as I mentioned above, since the process that is parsing the xfer event
is not the one that is going to disable the channel in parallel.

Could you please respin this series dropping patch 3/4 and also addressing the
issue I mentioned in patch 4/4?

- Mani
Qiang Yu Dec. 7, 2023, 9:50 a.m. UTC | #12
On 12/7/2023 2:43 PM, Manivannan Sadhasivam wrote:
> On Thu, Dec 07, 2023 at 01:27:19PM +0800, Qiang Yu wrote:
>> On 12/6/2023 9:48 PM, Manivannan Sadhasivam wrote:
>>> On Wed, Dec 06, 2023 at 10:25:12AM +0800, Qiang Yu wrote:
>>>> On 11/30/2023 1:31 PM, Manivannan Sadhasivam wrote:
>>>>> On Wed, Nov 29, 2023 at 11:29:07AM +0800, Qiang Yu wrote:
>>>>>> On 11/28/2023 9:32 PM, Manivannan Sadhasivam wrote:
>>>>>>> On Mon, Nov 27, 2023 at 03:13:55PM +0800, Qiang Yu wrote:
>>>>>>>> On 11/24/2023 6:04 PM, Manivannan Sadhasivam wrote:
>>>>>>>>> On Tue, Nov 14, 2023 at 01:27:39PM +0800, Qiang Yu wrote:
>>>>>>>>>> Ensure read and write locks for the channel are not taken in succession by
>>>>>>>>>> dropping the read lock from parse_xfer_event() such that a callback given
>>>>>>>>>> to client can potentially queue buffers and acquire the write lock in that
>>>>>>>>>> process. Any queueing of buffers should be done without channel read lock
>>>>>>>>>> acquired as it can result in multiple locks and a soft lockup.
>>>>>>>>>>
>>>>>>>>> Is this patch trying to fix an existing issue in client drivers or a potential
>>>>>>>>> issue in the future drivers?
>>>>>>>>>
>>>>>>>>> Even if you take care of disabled channels, "mhi_event->lock" acquired during
>>>>>>>>> mhi_mark_stale_events() can cause deadlock, since event lock is already held by
>>>>>>>>> mhi_ev_task().
>>>>>>>>>
>>>>>>>>> I'd prefer not to open the window unless this patch is fixing a real issue.
>>>>>>>>>
>>>>>>>>> - Mani
>>>>>>>> In [PATCH v4 1/4] bus: mhi: host: Add spinlock to protect WP access when
>>>>>>>> queueing
>>>>>>>> TREs,  we add
>>>>>>>> write_lock_bh(&mhi_chan->lock)/write_unlock_bh(&mhi_chan->lock)
>>>>>>>> in mhi_gen_tre, which may be invoked as part of mhi_queue in client xfer
>>>>>>>> callback,
>>>>>>>> so we have to use read_unlock_bh(&mhi_chan->lock) here to avoid acquiring
>>>>>>>> mhi_chan->lock
>>>>>>>> twice.
>>>>>>>>
>>>>>>>> Sorry for confusing you. Do you think we need to sqush this two patch into
>>>>>>>> one?
>>>>>>> Well, if patch 1 is introducing a potential deadlock, then we should fix patch
>>>>>>> 1 itself and not introduce a follow up patch.
>>>>>>>
>>>>>>> But there is one more issue that I pointed out in my previous reply.
>>>>>> Sorry, I can not understand why "mhi_event->lock" acquired during
>>>>>> mhi_mark_stale_events() can cause deadlock. In mhi_ev_task(), we will
>>>>>> not invoke mhi_mark_stale_events(). Can you provide some interpretation?
>>>>> Going by your theory that if a channel gets disabled while processing the event,
>>>>> the process trying to disable the channel will try to acquire "mhi_event->lock"
>>>>> which is already held by the process processing the event.
>>>>>
>>>>> - Mani
>>>> OK, I get you. Thank you for kind explanation. Hopefully I didn't intrude
>>>> too much.
>>> Not at all. Btw, did you actually encounter any issue that this patch is trying
>>> to fix? Or just fixing based on code inspection.
>>>
>>> - Mani
>> Yes, we actually meet the race issue in downstream driver. But I can not
>> find more details about the issue.
> Hmm. I think it is OK to accept this patch and ignore the channel disabling
> concern since the event lock is in place to prevent that. There would be no
> deadlock as I mentioned above, since the process that is parsing the xfer event
> is not the one that is going to disable the channel in parallel.
>
> Could you please respin this series dropping patch 3/4 and also addressing the
> issue I mentioned in patch 4/4?
>
> - Mani
Thank you for tirelessly review these patches. Will do this in next version.
diff mbox series

Patch

diff --git a/drivers/bus/mhi/host/main.c b/drivers/bus/mhi/host/main.c
index 6c6d253..c4215b0 100644
--- a/drivers/bus/mhi/host/main.c
+++ b/drivers/bus/mhi/host/main.c
@@ -642,6 +642,8 @@  static int parse_xfer_event(struct mhi_controller *mhi_cntrl,
 			mhi_del_ring_element(mhi_cntrl, tre_ring);
 			local_rp = tre_ring->rp;
 
+			read_unlock_bh(&mhi_chan->lock);
+
 			/* notify client */
 			mhi_chan->xfer_cb(mhi_chan->mhi_dev, &result);
 
@@ -667,6 +669,8 @@  static int parse_xfer_event(struct mhi_controller *mhi_cntrl,
 					kfree(buf_info->cb_buf);
 				}
 			}
+
+			read_lock_bh(&mhi_chan->lock);
 		}
 		break;
 	} /* CC_EOT */