From patchwork Thu Nov 23 08:46:29 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 13465949 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="OUnXahqX" Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id EA8C010F9; Thu, 23 Nov 2023 00:47:31 -0800 (PST) Received: from pps.filterd (m0279864.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3AN4Vdh4000627; Thu, 23 Nov 2023 08:47:17 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=Teean3I23xSOsCMd6xQbkloILU9/rehRbLH90OrQ0hA=; b=OUnXahqXqBMsVeQw9cXGpQibr/+Wx2g4omSutZlLVNtPt99Di96ohCG+pdt9Kd6GJLq2 LYnDQEAnvA6NznJgrfKsdQKBNpxMr+uLawqV62dXdN+238PknVIzqUZNwkVeziPTfwOs pdz4Nw92RKzZnV+67NwuUmTD1p8qHiliLsjJQIM+OsY6ffmzBnRGR4hijna7Mt6iPV4k wdwXrMDIHR1CDZn5lx4qCV+PwK8NEXYx29fOGfpYu0B9oGYry5XTlLdHRTACV4VZNAUB XPIQyIp7D5U2GvuOAogOvpiYXmOf+cGex/lzq7VHCSIQHW4p4FvM9yNAmmqxWBPueVTV Dw== Received: from nasanppmta03.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3uhgudagth-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 23 Nov 2023 08:47:17 +0000 Received: from pps.filterd (NASANPPMTA03.qualcomm.com [127.0.0.1]) by NASANPPMTA03.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3AN8VUaF023801; Thu, 23 Nov 2023 08:47:16 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA03.qualcomm.com (PPS) with ESMTP id 3uhwcrkkbu-1; Thu, 23 Nov 2023 08:47:16 +0000 Received: from NASANPPMTA03.qualcomm.com (NASANPPMTA03.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3AN8j73E009938; Thu, 23 Nov 2023 08:47:16 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA03.qualcomm.com (PPS) with ESMTP id 3AN8lF8e012090; Thu, 23 Nov 2023 08:47:16 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id B572520A68; Thu, 23 Nov 2023 00:47:15 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, adrian.hunter@intel.com, beanhuo@micron.com, avri.altman@wdc.com, junwoo80.lee@samsung.com, martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org, Andy Gross , Bjorn Andersson , Konrad Dybcio , Vinod Koul , Kishon Vijay Abraham I , linux-phy@lists.infradead.org (open list:GENERIC PHY FRAMEWORK), linux-kernel@vger.kernel.org (open list) Subject: [PATCH v5 09/10] phy: qualcomm: phy-qcom-qmp-ufs: Add High Speed Gear 5 support for SM8550 Date: Thu, 23 Nov 2023 00:46:29 -0800 Message-Id: <1700729190-17268-10-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1700729190-17268-1-git-send-email-quic_cang@quicinc.com> References: <1700729190-17268-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: Twa6HN1h82FmVTvtoQMzkYDk36t4Zcr4 X-Proofpoint-ORIG-GUID: Twa6HN1h82FmVTvtoQMzkYDk36t4Zcr4 X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.987,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-11-23_06,2023-11-22_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 lowpriorityscore=0 spamscore=0 mlxlogscore=999 impostorscore=0 malwarescore=0 priorityscore=1501 clxscore=1015 mlxscore=0 adultscore=0 bulkscore=0 suspectscore=0 phishscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2311230062 Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: On SM8550, two sets of UFS PHY settings are provided, one set is to support HS-G5, another set is to support HS-G4 and lower gears. The two sets of PHY settings are programming different values to different registers, mixing the two sets and/or overwriting one set with another set is definitely not blessed by UFS PHY designers. To add HS-G5 support for SM8550, split the two sets of PHY settings into their dedicated overlay tables, only the common parts of the two sets of PHY settings are left in the .tbls. Consider we are going to add even higher gear support in future, to avoid adding more tables with different names, rename the .tbls_hs_g4 and make it an array, a size of 2 is enough as of now. In this case, .tbls alone is not a complete set of PHY settings, so either tbls_hs_overlay[0] or tbls_hs_overlay[1] must be applied on top of the .tbls to become a complete set of PHY settings. Signed-off-by: Can Guo --- drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h | 2 + drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h | 2 + .../qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h | 9 ++ drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 174 ++++++++++++++++++--- 4 files changed, 166 insertions(+), 21 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h index c23d5e4..e563af5 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v6.h @@ -18,6 +18,7 @@ #define QPHY_V6_PCS_UFS_BIST_FIXED_PAT_CTRL 0x060 #define QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY 0x074 #define QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY 0x0bc +#define QPHY_V6_PCS_UFS_RX_HS_G5_SYNC_LENGTH_CAPABILITY 0x12c #define QPHY_V6_PCS_UFS_DEBUG_BUS_CLKSEL 0x158 #define QPHY_V6_PCS_UFS_LINECFG_DISABLE 0x17c #define QPHY_V6_PCS_UFS_RX_MIN_HIBERN8_TIME 0x184 @@ -27,5 +28,6 @@ #define QPHY_V6_PCS_UFS_READY_STATUS 0x1a8 #define QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1 0x1f4 #define QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1 0x1fc +#define QPHY_V6_PCS_UFS_RX_HSG5_SYNC_WAIT_TIME 0x220 #endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h index f420f8f..ef392ce 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-com-v6.h @@ -56,6 +56,8 @@ #define QSERDES_V6_COM_SYS_CLK_CTRL 0xe4 #define QSERDES_V6_COM_SYSCLK_BUF_ENABLE 0xe8 #define QSERDES_V6_COM_PLL_IVCO 0xf4 +#define QSERDES_V6_COM_CMN_IETRIM 0xfc +#define QSERDES_V6_COM_CMN_IPTRIM 0x100 #define QSERDES_V6_COM_SYSCLK_EN_SEL 0x110 #define QSERDES_V6_COM_RESETSM_CNTRL 0x118 #define QSERDES_V6_COM_LOCK_CMP_EN 0x120 diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h index 674f158..48f31c8 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-ufs-v6.h @@ -15,8 +15,15 @@ #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE2 0x08 #define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4 0x10 +#define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_SO_GAIN_RATE4 0x24 +#define QSERDES_UFS_V6_RX_UCDR_FASTLOCK_COUNT_HIGH_RATE4 0x54 #define QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2 0xd4 +#define QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE4 0xdc +#define QSERDES_UFS_V6_RX_UCDR_SO_GAIN_RATE4 0xf0 +#define QSERDES_UFS_V6_RX_UCDR_PI_CONTROLS 0xf4 #define QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL 0x178 +#define QSERDES_UFS_V6_RX_EQ_OFFSET_ADAPTOR_CNTRL1 0x1bc +#define QSERDES_UFS_V6_RX_OFFSET_ADAPTOR_CNTRL3 0x1c4 #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0 0x208 #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1 0x20c #define QSERDES_UFS_V6_RX_MODE_RATE_0_1_B3 0x214 @@ -28,6 +35,8 @@ #define QSERDES_UFS_V6_RX_MODE_RATE3_B5 0x264 #define QSERDES_UFS_V6_RX_MODE_RATE3_B8 0x270 #define QSERDES_UFS_V6_RX_MODE_RATE4_B3 0x280 +#define QSERDES_UFS_V6_RX_MODE_RATE4_B4 0x284 #define QSERDES_UFS_V6_RX_MODE_RATE4_B6 0x28c +#define QSERDES_UFS_V6_RX_DLL0_FTUNE_CTRL 0x2f8 #endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c index ad91f92..29106ec 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c @@ -41,6 +41,8 @@ #define PHY_INIT_COMPLETE_TIMEOUT 10000 +#define NUM_OVERLAY 2 + struct qmp_phy_init_tbl { unsigned int offset; unsigned int val; @@ -649,15 +651,22 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_SEL_1, 0x11), QMP_PHY_INIT_CFG(QSERDES_V6_COM_HSCLK_HS_SWITCH_SEL_1, 0x00), QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP_EN, 0x01), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f), QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_INITVAL2, 0x00), QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE0, 0x41), - QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a), QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE0, 0x18), QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_CCTRL_MODE0, 0x14), QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP1_MODE0, 0x7f), QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE0, 0x06), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_hs_b_serdes[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x44), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_g4_serdes[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x0a), QMP_PHY_INIT_CFG(QSERDES_V6_COM_DEC_START_MODE1, 0x4c), QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE1, 0x0a), QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_RCTRL_MODE1, 0x18), @@ -666,19 +675,24 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_V6_COM_LOCK_CMP2_MODE1, 0x07), }; -static const struct qmp_phy_init_tbl sm8550_ufsphy_hs_b_serdes[] = { - QMP_PHY_INIT_CFG(QSERDES_V6_COM_VCO_TUNE_MAP, 0x44), +static const struct qmp_phy_init_tbl sm8550_ufsphy_g5_serdes[] = { + QMP_PHY_INIT_CFG(QSERDES_V6_COM_PLL_IVCO, 0x1f), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_IETRIM, 0x1b), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CMN_IPTRIM, 0x1c), + QMP_PHY_INIT_CFG(QSERDES_V6_COM_CP_CTRL_MODE0, 0x06), }; static const struct qmp_phy_init_tbl sm8550_ufsphy_tx[] = { QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_LANE_MODE_1, 0x05), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_RES_CODE_LANE_OFFSET_TX, 0x07), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_g4_tx[] = { QMP_PHY_INIT_CFG(QSERDES_UFS_V6_TX_FR_DCC_CTRL, 0x4c), }; static const struct qmp_phy_init_tbl sm8550_ufsphy_rx[] = { QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE2, 0x0c), - QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B0, 0xc2), QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE_0_1_B1, 0xc2), @@ -694,16 +708,45 @@ static const struct qmp_phy_init_tbl sm8550_ufsphy_rx[] = { QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE3_B8, 0x02), }; +static const struct qmp_phy_init_tbl sm8550_ufsphy_g4_rx[] = { + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x0e), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_g5_rx[] = { + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FO_GAIN_RATE4, 0x0c), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_SO_GAIN_RATE4, 0x04), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x14), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_PI_CONTROLS, 0x07), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_OFFSET_ADAPTOR_CNTRL3, 0x0e), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_COUNT_HIGH_RATE4, 0x02), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_FO_GAIN_RATE4, 0x1c), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_UCDR_FASTLOCK_SO_GAIN_RATE4, 0x06), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_VGA_CAL_MAN_VAL, 0x08), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B3, 0xb9), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B4, 0x4f), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_MODE_RATE4_B6, 0xff), + QMP_PHY_INIT_CFG(QSERDES_UFS_V6_RX_DLL0_FTUNE_CTRL, 0x30), +}; + static const struct qmp_phy_init_tbl sm8550_ufsphy_pcs[] = { QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_SIGDET_CTRL2, 0x69), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0f), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_MID_TERM_CTRL1, 0x43), - QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x2b), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_MULTI_LANE_CTRL1, 0x02), +}; + +static const struct qmp_phy_init_tbl sm8550_ufsphy_g4_pcs[] = { + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x2b), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_TX_HSGEAR_CAPABILITY, 0x04), QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSGEAR_CAPABILITY, 0x04), }; +static const struct qmp_phy_init_tbl sm8550_ufsphy_g5_pcs[] = { + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_PLL_CNTL, 0x33), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HS_G5_SYNC_LENGTH_CAPABILITY, 0x4f), + QMP_PHY_INIT_CFG(QPHY_V6_PCS_UFS_RX_HSG5_SYNC_WAIT_TIME, 0x9e), +}; + struct qmp_ufs_offsets { u16 serdes; u16 pcs; @@ -723,6 +766,8 @@ struct qmp_phy_cfg_tbls { int rx_num; const struct qmp_phy_init_tbl *pcs; int pcs_num; + /* Maximum supported Gear of this tbls */ + u32 max_gear; }; /* struct qmp_phy_cfg - per-PHY initialization config */ @@ -730,13 +775,15 @@ struct qmp_phy_cfg { int lanes; const struct qmp_ufs_offsets *offsets; + /* Maximum supported Gear of this config */ + u32 max_supported_gear; /* Main init sequence for PHY blocks - serdes, tx, rx, pcs */ const struct qmp_phy_cfg_tbls tbls; /* Additional sequence for HS Series B */ const struct qmp_phy_cfg_tbls tbls_hs_b; - /* Additional sequence for HS G4 */ - const struct qmp_phy_cfg_tbls tbls_hs_g4; + /* Additional sequence for different HS Gears */ + const struct qmp_phy_cfg_tbls tbls_hs_overlay[NUM_OVERLAY]; /* clock ids to be requested */ const char * const *clk_list; @@ -839,6 +886,7 @@ static const struct qmp_phy_cfg msm8996_ufsphy_cfg = { .lanes = 1, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G3, .tbls = { .serdes = msm8996_ufsphy_serdes, @@ -864,6 +912,7 @@ static const struct qmp_phy_cfg sa8775p_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8350_ufsphy_serdes, @@ -879,13 +928,14 @@ static const struct qmp_phy_cfg sa8775p_ufsphy_cfg = { .serdes = sm8350_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8350_ufsphy_g4_tx, .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx), .rx = sm8350_ufsphy_g4_rx, .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx), .pcs = sm8350_ufsphy_g4_pcs, .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sm8450_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l), @@ -898,6 +948,7 @@ static const struct qmp_phy_cfg sc8280xp_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8350_ufsphy_serdes, @@ -913,13 +964,14 @@ static const struct qmp_phy_cfg sc8280xp_ufsphy_cfg = { .serdes = sm8350_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8350_ufsphy_g4_tx, .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx), .rx = sm8350_ufsphy_g4_rx, .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx), .pcs = sm8350_ufsphy_g4_pcs, .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), @@ -932,6 +984,7 @@ static const struct qmp_phy_cfg sdm845_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G3, .tbls = { .serdes = sdm845_ufsphy_serdes, @@ -960,6 +1013,7 @@ static const struct qmp_phy_cfg sm6115_ufsphy_cfg = { .lanes = 1, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G3, .tbls = { .serdes = sm6115_ufsphy_serdes, @@ -988,6 +1042,7 @@ static const struct qmp_phy_cfg sm7150_ufsphy_cfg = { .lanes = 1, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G3, .tbls = { .serdes = sdm845_ufsphy_serdes, @@ -1016,6 +1071,7 @@ static const struct qmp_phy_cfg sm8150_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8150_ufsphy_serdes, @@ -1031,13 +1087,14 @@ static const struct qmp_phy_cfg sm8150_ufsphy_cfg = { .serdes = sm8150_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8150_ufsphy_hs_g4_tx, .tx_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_tx), .rx = sm8150_ufsphy_hs_g4_rx, .rx_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_rx), .pcs = sm8150_ufsphy_hs_g4_pcs, .pcs_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), @@ -1050,6 +1107,7 @@ static const struct qmp_phy_cfg sm8250_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8150_ufsphy_serdes, @@ -1065,13 +1123,14 @@ static const struct qmp_phy_cfg sm8250_ufsphy_cfg = { .serdes = sm8150_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8150_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8250_ufsphy_hs_g4_tx, .tx_num = ARRAY_SIZE(sm8250_ufsphy_hs_g4_tx), .rx = sm8250_ufsphy_hs_g4_rx, .rx_num = ARRAY_SIZE(sm8250_ufsphy_hs_g4_rx), .pcs = sm8150_ufsphy_hs_g4_pcs, .pcs_num = ARRAY_SIZE(sm8150_ufsphy_hs_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), @@ -1084,6 +1143,7 @@ static const struct qmp_phy_cfg sm8350_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8350_ufsphy_serdes, @@ -1099,13 +1159,14 @@ static const struct qmp_phy_cfg sm8350_ufsphy_cfg = { .serdes = sm8350_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8350_ufsphy_g4_tx, .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx), .rx = sm8350_ufsphy_g4_rx, .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx), .pcs = sm8350_ufsphy_g4_pcs, .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), @@ -1118,6 +1179,7 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets, + .max_supported_gear = UFS_HS_G4, .tbls = { .serdes = sm8350_ufsphy_serdes, @@ -1133,13 +1195,14 @@ static const struct qmp_phy_cfg sm8450_ufsphy_cfg = { .serdes = sm8350_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8350_ufsphy_hs_b_serdes), }, - .tbls_hs_g4 = { + .tbls_hs_overlay[0] = { .tx = sm8350_ufsphy_g4_tx, .tx_num = ARRAY_SIZE(sm8350_ufsphy_g4_tx), .rx = sm8350_ufsphy_g4_rx, .rx_num = ARRAY_SIZE(sm8350_ufsphy_g4_rx), .pcs = sm8350_ufsphy_g4_pcs, .pcs_num = ARRAY_SIZE(sm8350_ufsphy_g4_pcs), + .max_gear = UFS_HS_G4, }, .clk_list = sm8450_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sm8450_ufs_phy_clk_l), @@ -1152,6 +1215,7 @@ static const struct qmp_phy_cfg sm8550_ufsphy_cfg = { .lanes = 2, .offsets = &qmp_ufs_offsets_v6, + .max_supported_gear = UFS_HS_G5, .tbls = { .serdes = sm8550_ufsphy_serdes, @@ -1167,6 +1231,26 @@ static const struct qmp_phy_cfg sm8550_ufsphy_cfg = { .serdes = sm8550_ufsphy_hs_b_serdes, .serdes_num = ARRAY_SIZE(sm8550_ufsphy_hs_b_serdes), }, + .tbls_hs_overlay[0] = { + .serdes = sm8550_ufsphy_g4_serdes, + .serdes_num = ARRAY_SIZE(sm8550_ufsphy_g4_serdes), + .tx = sm8550_ufsphy_g4_tx, + .tx_num = ARRAY_SIZE(sm8550_ufsphy_g4_tx), + .rx = sm8550_ufsphy_g4_rx, + .rx_num = ARRAY_SIZE(sm8550_ufsphy_g4_rx), + .pcs = sm8550_ufsphy_g4_pcs, + .pcs_num = ARRAY_SIZE(sm8550_ufsphy_g4_pcs), + .max_gear = UFS_HS_G4, + }, + .tbls_hs_overlay[1] = { + .serdes = sm8550_ufsphy_g5_serdes, + .serdes_num = ARRAY_SIZE(sm8550_ufsphy_g5_serdes), + .rx = sm8550_ufsphy_g5_rx, + .rx_num = ARRAY_SIZE(sm8550_ufsphy_g5_rx), + .pcs = sm8550_ufsphy_g5_pcs, + .pcs_num = ARRAY_SIZE(sm8550_ufsphy_g5_pcs), + .max_gear = UFS_HS_G5, + }, .clk_list = sdm845_ufs_phy_clk_l, .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), .vreg_list = qmp_phy_vreg_l, @@ -1229,17 +1313,63 @@ static void qmp_ufs_pcs_init(struct qmp_ufs *qmp, const struct qmp_phy_cfg_tbls qmp_ufs_configure(pcs, tbls->pcs, tbls->pcs_num); } -static void qmp_ufs_init_registers(struct qmp_ufs *qmp, const struct qmp_phy_cfg *cfg) +static bool qmp_ufs_match_gear_overlay(struct qmp_ufs *qmp, const struct qmp_phy_cfg *cfg, int *i) +{ + u32 max_gear, floor_max_gear = cfg->max_supported_gear; + bool found = false; + int j; + + for (j = 0; j < NUM_OVERLAY; j ++) { + max_gear = cfg->tbls_hs_overlay[j].max_gear; + + if (max_gear == 0) + continue; + + /* Direct matching, bail */ + if (qmp->submode == max_gear) { + *i = j; + return true; + } + + /* If no direct matching, the lowest gear is the best matching */ + if (max_gear < floor_max_gear) { + *i = j; + found = true; + floor_max_gear = max_gear; + } + } + + return found; +} + +static int qmp_ufs_init_registers(struct qmp_ufs *qmp, const struct qmp_phy_cfg *cfg) { + bool apply_overlay; + int i; + + if (qmp->submode > cfg->max_supported_gear || qmp->submode == 0) { + dev_err(qmp->dev, "Invalid PHY submode %u\n", qmp->submode); + return -EINVAL; + } + + apply_overlay = qmp_ufs_match_gear_overlay(qmp, cfg, &i); + qmp_ufs_serdes_init(qmp, &cfg->tbls); + if (apply_overlay) + qmp_ufs_serdes_init(qmp, &cfg->tbls_hs_overlay[i]); + if (qmp->mode == PHY_MODE_UFS_HS_B) qmp_ufs_serdes_init(qmp, &cfg->tbls_hs_b); + qmp_ufs_lanes_init(qmp, &cfg->tbls); - if (qmp->submode == UFS_HS_G4) - qmp_ufs_lanes_init(qmp, &cfg->tbls_hs_g4); + if (apply_overlay) + qmp_ufs_lanes_init(qmp, &cfg->tbls_hs_overlay[i]); + qmp_ufs_pcs_init(qmp, &cfg->tbls); - if (qmp->submode == UFS_HS_G4) - qmp_ufs_pcs_init(qmp, &cfg->tbls_hs_g4); + if (apply_overlay) + qmp_ufs_pcs_init(qmp, &cfg->tbls_hs_overlay[i]); + + return 0; } static int qmp_ufs_com_init(struct qmp_ufs *qmp) @@ -1331,7 +1461,9 @@ static int qmp_ufs_power_on(struct phy *phy) unsigned int val; int ret; - qmp_ufs_init_registers(qmp, cfg); + ret = qmp_ufs_init_registers(qmp, cfg); + if (ret) + return ret; ret = reset_control_deassert(qmp->ufs_reset); if (ret)