| Message ID | 1702493883-30148-1-git-send-email-quic_khsieh@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v5] drm/msm/dpu: improve DSC allocation | expand |
On Wed, 13 Dec 2023 at 20:58, Kuogee Hsieh <quic_khsieh@quicinc.com> wrote: > > At DSC V1.1 DCE (Display Compression Engine) contains a DSC encoder. > However, at DSC V1.2 DCE consists of two DSC encoders, one has an odd > index and another one has an even index. Each encoder can work > independently. But only two DSC encoders from same DCE can be paired > to work together to support DSC merge mode at DSC V1.2. For DSC V1.1 > two consecutive DSC encoders (start with even index) have to be paired > to support DSC merge mode. In addition, the DSC with even index have > to be mapped to even PINGPONG index and DSC with odd index have to be > mapped to odd PINGPONG index at its data path in regardless of DSC > V1.1 or V1.2. This patch improves DSC allocation mechanism with > consideration of those factors. > > Changes in V5: > -- delete dsc_id[] > -- update to global_state->dsc_to_enc_id[] directly > -- replace ndx with idx > -- fix indentation at function declaration > -- only one for loop at _dpu_rm_reserve_dsc_single() > > Changes in V4: > -- rework commit message > -- use reserved_by_other() > -- add _dpu_rm_pingpong_next_index() > -- revise _dpu_rm_pingpong_dsc_check() > > Changes in V3: > -- add dpu_rm_pingpong_dsc_check() > -- for pair allocation use i += 2 at for loop > > Changes in V2: > -- split _dpu_rm_reserve_dsc() into _dpu_rm_reserve_dsc_single() and > _dpu_rm_reserve_dsc_pair() > > Fixes: f2803ee91a41 ("drm/msm/disp/dpu1: Add DSC support in RM") > Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> > --- > drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c | 162 +++++++++++++++++++++++++++++---- > 1 file changed, 146 insertions(+), 16 deletions(-) > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c > index f9215643..7c7a88f 100644 > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c > @@ -461,29 +461,159 @@ static int _dpu_rm_reserve_ctls( > return 0; > } > > -static int _dpu_rm_reserve_dsc(struct dpu_rm *rm, > - struct dpu_global_state *global_state, > - struct drm_encoder *enc, > - const struct msm_display_topology *top) > +static int _dpu_rm_pingpong_next_index(int start, > + uint32_t enc_id, > + uint32_t *pp_to_enc_id, > + int pp_max) > { > - int num_dsc = top->num_dsc; > int i; > > - /* check if DSC required are allocated or not */ > - for (i = 0; i < num_dsc; i++) { > - if (!rm->dsc_blks[i]) { > - DPU_ERROR("DSC %d does not exist\n", i); > - return -EIO; > - } > + for (i = start; i < pp_max; i++) { > + if (pp_to_enc_id[i] == enc_id) > + return i; > + } > + > + return -ENAVAIL; > +} > + > +static int _dpu_rm_pingpong_dsc_check(int dsc_idx, int pp_idx) > +{ > + CHECK: Blank lines aren't necessary after an open brace '{' #85: FILE: drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c:481: > + /* > + * DSC with even index must be used with the PINGPONG with even index > + * DSC with odd index must be used with the PINGPONG with odd index > + */ > + if ((dsc_idx & 0x01) != (pp_idx & 0x01)) > + return -ENAVAIL; > + > + return 0; > +} > + > +static int _dpu_rm_reserve_dsc_single(struct dpu_rm *rm, > + struct dpu_global_state *global_state, > + uint32_t enc_id, > + const struct msm_display_topology *top) > +{ > + int num_dsc = 0; > + uint32_t *pp_to_enc_id = global_state->pingpong_to_enc_id; > + uint32_t *dsc_enc_id = global_state->dsc_to_enc_id; > + int pp_max = PINGPONG_MAX - PINGPONG_0; > + int pp_idx; > + int dsc_idx; > + int ret; > + > + for (dsc_idx = 0; dsc_idx < ARRAY_SIZE(rm->dsc_blks) && > + num_dsc < 1; dsc_idx++) { The condition is wrong here. Also it is misaligned. > + if (!rm->dsc_blks[dsc_idx]) > + continue; > + > + if (reserved_by_other(dsc_enc_id, dsc_idx, enc_id)) > + continue; > + > + pp_idx = _dpu_rm_pingpong_next_index(0, enc_id, And this is wrong too. You should start relatively to your previous PP index. > + pp_to_enc_id, pp_max); > + if (pp_idx < 0) > + return -ENAVAIL; > + > + ret = _dpu_rm_pingpong_dsc_check(dsc_idx, pp_idx); > + if (ret) > + return -ENAVAIL; > + > + dsc_enc_id[dsc_idx] = enc_id; > + num_dsc++; > + } > + > + if (!num_dsc) { > + DPU_ERROR("DSC allocation failed num_dsc=%d\n", num_dsc); > + return -ENAVAIL; > + } > > - if (global_state->dsc_to_enc_id[i]) { > - DPU_ERROR("DSC %d is already allocated\n", i); > - return -EIO; > + return 0; > +} > + > +static int _dpu_rm_reserve_dsc_pair(struct dpu_rm *rm, > + struct dpu_global_state *global_state, > + uint32_t enc_id, > + const struct msm_display_topology *top) > +{ > + int num_dsc = 0; > + uint32_t *pp_to_enc_id = global_state->pingpong_to_enc_id; > + uint32_t *dsc_enc_id = global_state->dsc_to_enc_id; No need for these anymore. Please inline them. Or simply pass global_state to _dpu_rm_pingpong_next_index(). Other functions in dpu_rm.c don't define local variables for these arrays. I don't see why this patch should deviate from that. > + int pp_max = PINGPONG_MAX - PINGPONG_0; > + int start_pp_idx = 0; > + int dsc_idx, pp_idx; > + int ret; > + > + /* only start from even dsc index */ > + for (dsc_idx = 0; dsc_idx < ARRAY_SIZE(rm->dsc_blks) && > + num_dsc < top->num_dsc; dsc_idx += 2) { Misaligned > + if (!rm->dsc_blks[dsc_idx] || > + !rm->dsc_blks[dsc_idx + 1]) > + continue; > + > + /* consective dsc index to be paired */ > + if (reserved_by_other(dsc_enc_id, dsc_idx, enc_id) || > + reserved_by_other(dsc_enc_id, dsc_idx + 1, enc_id)) > + continue; > + > + pp_idx = _dpu_rm_pingpong_next_index(start_pp_idx, enc_id, > + pp_to_enc_id, pp_max); > + if (pp_idx < 0) > + return -ENAVAIL; > + > + ret = _dpu_rm_pingpong_dsc_check(dsc_idx, pp_idx); > + if (ret) { > + pp_idx = 0; > + continue; > } > + > + pp_idx = _dpu_rm_pingpong_next_index(pp_idx + 1, enc_id, > + pp_to_enc_id, pp_max); > + if (pp_idx < 0) > + return -ENAVAIL; Fresh pp_idx has to be checked against dsc_idx + 1. Let me also have a suggestion for you. The pp_max is a constant. You don't have to pass it to _dpu_rm_pingpong_next_index() at all! Also if you change the function to accept enum dpu_pingpong, you can start with PINGPONG_NONE and move +1 into the function, making the callers simpler, removing the need or start_pp_idx (which I asked to do in v4) etc. > + > + dsc_enc_id[dsc_idx] = enc_id; > + dsc_enc_id[dsc_idx + 1] = enc_id; > + num_dsc += 2; > + > + start_pp_idx = pp_idx + 1; /* start for next pair */ > } > > - for (i = 0; i < num_dsc; i++) > - global_state->dsc_to_enc_id[i] = enc->base.id; > + if (num_dsc < top->num_dsc) { > + DPU_ERROR("DSC allocation failed num_dsc=%d required=%d\n", > + num_dsc, top->num_dsc); Misaligned > + return -ENAVAIL; > + } > + > + return 0; > +} > + > +static int _dpu_rm_reserve_dsc(struct dpu_rm *rm, > + struct dpu_global_state *global_state, > + struct drm_encoder *enc, > + const struct msm_display_topology *top) > +{ > + uint32_t enc_id = enc->base.id; > + > + if (!top->num_dsc || !top->num_intf) > + return 0; > + > + /* > + * Facts: > + * 1) DSCs ouput to an interface WARNING: 'ouput' may be misspelled - perhaps 'output'? Also, what does it bring to us? > + * 2) no pingpong split (two layer mixers shared one pingpong) > + * 3) DSC pair start from even index, such as index(0,1), (2,3), etc starts > + * 4) even PINGPONG connects to even DSC > + * 5) odd PINGPONG connects to odd DSC > + * 6) pair: encoder +--> pp_idx_0 --> dsc_idx_0 > + * +--> pp_idx_1 --> dsc_idx_1 > + */ > + > + /* num_dsc should be either 1, 2 or 4 */ > + if (top->num_dsc > top->num_intf) /* merge mode */ > + return _dpu_rm_reserve_dsc_pair(rm, global_state, enc_id, top); > + else > + return _dpu_rm_reserve_dsc_single(rm, global_state, enc_id, top); > > return 0; > } > -- > 2.7.4 > Kuogee, we value your patches. But could you please fix your editor settings to properly align C statements? E.g. Vim has the "set cino=(0" setting, which does most of the work. I suspect that your code editor should also have a similar setting. Also could you please establish a practice of using checkpatch.pl at least until we stop hitting obvious issues there?
On 12/13/2023 3:00 PM, Dmitry Baryshkov wrote: > On Wed, 13 Dec 2023 at 20:58, Kuogee Hsieh <quic_khsieh@quicinc.com> wrote: >> At DSC V1.1 DCE (Display Compression Engine) contains a DSC encoder. >> However, at DSC V1.2 DCE consists of two DSC encoders, one has an odd >> index and another one has an even index. Each encoder can work >> independently. But only two DSC encoders from same DCE can be paired >> to work together to support DSC merge mode at DSC V1.2. For DSC V1.1 >> two consecutive DSC encoders (start with even index) have to be paired >> to support DSC merge mode. In addition, the DSC with even index have >> to be mapped to even PINGPONG index and DSC with odd index have to be >> mapped to odd PINGPONG index at its data path in regardless of DSC >> V1.1 or V1.2. This patch improves DSC allocation mechanism with >> consideration of those factors. >> >> Changes in V5: >> -- delete dsc_id[] >> -- update to global_state->dsc_to_enc_id[] directly >> -- replace ndx with idx >> -- fix indentation at function declaration >> -- only one for loop at _dpu_rm_reserve_dsc_single() >> >> Changes in V4: >> -- rework commit message >> -- use reserved_by_other() >> -- add _dpu_rm_pingpong_next_index() >> -- revise _dpu_rm_pingpong_dsc_check() >> >> Changes in V3: >> -- add dpu_rm_pingpong_dsc_check() >> -- for pair allocation use i += 2 at for loop >> >> Changes in V2: >> -- split _dpu_rm_reserve_dsc() into _dpu_rm_reserve_dsc_single() and >> _dpu_rm_reserve_dsc_pair() >> >> Fixes: f2803ee91a41 ("drm/msm/disp/dpu1: Add DSC support in RM") >> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> >> --- >> drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c | 162 +++++++++++++++++++++++++++++---- >> 1 file changed, 146 insertions(+), 16 deletions(-) >> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c >> index f9215643..7c7a88f 100644 >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c >> @@ -461,29 +461,159 @@ static int _dpu_rm_reserve_ctls( >> return 0; >> } >> >> -static int _dpu_rm_reserve_dsc(struct dpu_rm *rm, >> - struct dpu_global_state *global_state, >> - struct drm_encoder *enc, >> - const struct msm_display_topology *top) >> +static int _dpu_rm_pingpong_next_index(int start, >> + uint32_t enc_id, >> + uint32_t *pp_to_enc_id, >> + int pp_max) >> { >> - int num_dsc = top->num_dsc; >> int i; >> >> - /* check if DSC required are allocated or not */ >> - for (i = 0; i < num_dsc; i++) { >> - if (!rm->dsc_blks[i]) { >> - DPU_ERROR("DSC %d does not exist\n", i); >> - return -EIO; >> - } >> + for (i = start; i < pp_max; i++) { >> + if (pp_to_enc_id[i] == enc_id) >> + return i; >> + } >> + >> + return -ENAVAIL; >> +} >> + >> +static int _dpu_rm_pingpong_dsc_check(int dsc_idx, int pp_idx) >> +{ >> + > CHECK: Blank lines aren't necessary after an open brace '{' > #85: FILE: drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c:481: > >> + /* >> + * DSC with even index must be used with the PINGPONG with even index >> + * DSC with odd index must be used with the PINGPONG with odd index >> + */ >> + if ((dsc_idx & 0x01) != (pp_idx & 0x01)) >> + return -ENAVAIL; >> + >> + return 0; >> +} >> + >> +static int _dpu_rm_reserve_dsc_single(struct dpu_rm *rm, >> + struct dpu_global_state *global_state, >> + uint32_t enc_id, >> + const struct msm_display_topology *top) >> +{ >> + int num_dsc = 0; >> + uint32_t *pp_to_enc_id = global_state->pingpong_to_enc_id; >> + uint32_t *dsc_enc_id = global_state->dsc_to_enc_id; >> + int pp_max = PINGPONG_MAX - PINGPONG_0; >> + int pp_idx; >> + int dsc_idx; >> + int ret; >> + >> + for (dsc_idx = 0; dsc_idx < ARRAY_SIZE(rm->dsc_blks) && >> + num_dsc < 1; dsc_idx++) { > The condition is wrong here. Also it is misaligned. > >> + if (!rm->dsc_blks[dsc_idx]) >> + continue; >> + >> + if (reserved_by_other(dsc_enc_id, dsc_idx, enc_id)) >> + continue; >> + >> + pp_idx = _dpu_rm_pingpong_next_index(0, enc_id, > And this is wrong too. You should start relatively to your previous PP index. > >> + pp_to_enc_id, pp_max); >> + if (pp_idx < 0) >> + return -ENAVAIL; >> + >> + ret = _dpu_rm_pingpong_dsc_check(dsc_idx, pp_idx); >> + if (ret) >> + return -ENAVAIL; >> + >> + dsc_enc_id[dsc_idx] = enc_id; >> + num_dsc++; >> + } >> + >> + if (!num_dsc) { >> + DPU_ERROR("DSC allocation failed num_dsc=%d\n", num_dsc); >> + return -ENAVAIL; >> + } >> >> - if (global_state->dsc_to_enc_id[i]) { >> - DPU_ERROR("DSC %d is already allocated\n", i); >> - return -EIO; >> + return 0; >> +} >> + >> +static int _dpu_rm_reserve_dsc_pair(struct dpu_rm *rm, >> + struct dpu_global_state *global_state, >> + uint32_t enc_id, >> + const struct msm_display_topology *top) >> +{ >> + int num_dsc = 0; >> + uint32_t *pp_to_enc_id = global_state->pingpong_to_enc_id; >> + uint32_t *dsc_enc_id = global_state->dsc_to_enc_id; > No need for these anymore. Please inline them. Or simply pass > global_state to _dpu_rm_pingpong_next_index(). > Other functions in dpu_rm.c don't define local variables for these > arrays. I don't see why this patch should deviate from that. > >> + int pp_max = PINGPONG_MAX - PINGPONG_0; >> + int start_pp_idx = 0; >> + int dsc_idx, pp_idx; >> + int ret; >> + >> + /* only start from even dsc index */ >> + for (dsc_idx = 0; dsc_idx < ARRAY_SIZE(rm->dsc_blks) && >> + num_dsc < top->num_dsc; dsc_idx += 2) { > Misaligned > >> + if (!rm->dsc_blks[dsc_idx] || >> + !rm->dsc_blks[dsc_idx + 1]) >> + continue; >> + >> + /* consective dsc index to be paired */ >> + if (reserved_by_other(dsc_enc_id, dsc_idx, enc_id) || >> + reserved_by_other(dsc_enc_id, dsc_idx + 1, enc_id)) >> + continue; >> + >> + pp_idx = _dpu_rm_pingpong_next_index(start_pp_idx, enc_id, >> + pp_to_enc_id, pp_max); >> + if (pp_idx < 0) >> + return -ENAVAIL; >> + >> + ret = _dpu_rm_pingpong_dsc_check(dsc_idx, pp_idx); >> + if (ret) { >> + pp_idx = 0; >> + continue; >> } >> + >> + pp_idx = _dpu_rm_pingpong_next_index(pp_idx + 1, enc_id, >> + pp_to_enc_id, pp_max); >> + if (pp_idx < 0) >> + return -ENAVAIL; > Fresh pp_idx has to be checked against dsc_idx + 1. > > Let me also have a suggestion for you. The pp_max is a constant. You > don't have to pass it to _dpu_rm_pingpong_next_index() at all! Also if > you change the function to accept enum dpu_pingpong, you can start > with PINGPONG_NONE and move +1 into the function, making the callers > simpler, removing the need or start_pp_idx (which I asked to do in v4) > etc. > >> + >> + dsc_enc_id[dsc_idx] = enc_id; >> + dsc_enc_id[dsc_idx + 1] = enc_id; >> + num_dsc += 2; >> + >> + start_pp_idx = pp_idx + 1; /* start for next pair */ >> } >> >> - for (i = 0; i < num_dsc; i++) >> - global_state->dsc_to_enc_id[i] = enc->base.id; >> + if (num_dsc < top->num_dsc) { >> + DPU_ERROR("DSC allocation failed num_dsc=%d required=%d\n", >> + num_dsc, top->num_dsc); > Misaligned > >> + return -ENAVAIL; >> + } >> + >> + return 0; >> +} >> + >> +static int _dpu_rm_reserve_dsc(struct dpu_rm *rm, >> + struct dpu_global_state *global_state, >> + struct drm_encoder *enc, >> + const struct msm_display_topology *top) >> +{ >> + uint32_t enc_id = enc->base.id; >> + >> + if (!top->num_dsc || !top->num_intf) >> + return 0; >> + >> + /* >> + * Facts: >> + * 1) DSCs ouput to an interface > WARNING: 'ouput' may be misspelled - perhaps 'output'? > > Also, what does it bring to us? > >> + * 2) no pingpong split (two layer mixers shared one pingpong) >> + * 3) DSC pair start from even index, such as index(0,1), (2,3), etc > starts > >> + * 4) even PINGPONG connects to even DSC >> + * 5) odd PINGPONG connects to odd DSC >> + * 6) pair: encoder +--> pp_idx_0 --> dsc_idx_0 >> + * +--> pp_idx_1 --> dsc_idx_1 >> + */ >> + >> + /* num_dsc should be either 1, 2 or 4 */ >> + if (top->num_dsc > top->num_intf) /* merge mode */ >> + return _dpu_rm_reserve_dsc_pair(rm, global_state, enc_id, top); >> + else >> + return _dpu_rm_reserve_dsc_single(rm, global_state, enc_id, top); >> >> return 0; >> } >> -- >> 2.7.4 >> > Kuogee, we value your patches. But could you please fix your editor > settings to properly align C statements? E.g. Vim has the "set > cino=(0" setting, which does most of the work. I suspect that your > code editor should also have a similar setting. Also could you please > establish a practice of using checkpatch.pl at least until we stop > hitting obvious issues there? 1) yes, i have "set cino=(0" seeting t my vim editor 2) i had run checkpaych.pl at previous patches, I will make sure run checkpatch.pl for every patch from now on
On 12/13/2023 3:00 PM, Dmitry Baryshkov wrote: > On Wed, 13 Dec 2023 at 20:58, Kuogee Hsieh <quic_khsieh@quicinc.com> wrote: >> At DSC V1.1 DCE (Display Compression Engine) contains a DSC encoder. >> However, at DSC V1.2 DCE consists of two DSC encoders, one has an odd >> index and another one has an even index. Each encoder can work >> independently. But only two DSC encoders from same DCE can be paired >> to work together to support DSC merge mode at DSC V1.2. For DSC V1.1 >> two consecutive DSC encoders (start with even index) have to be paired >> to support DSC merge mode. In addition, the DSC with even index have >> to be mapped to even PINGPONG index and DSC with odd index have to be >> mapped to odd PINGPONG index at its data path in regardless of DSC >> V1.1 or V1.2. This patch improves DSC allocation mechanism with >> consideration of those factors. >> >> Changes in V5: >> -- delete dsc_id[] >> -- update to global_state->dsc_to_enc_id[] directly >> -- replace ndx with idx >> -- fix indentation at function declaration >> -- only one for loop at _dpu_rm_reserve_dsc_single() >> >> Changes in V4: >> -- rework commit message >> -- use reserved_by_other() >> -- add _dpu_rm_pingpong_next_index() >> -- revise _dpu_rm_pingpong_dsc_check() >> >> Changes in V3: >> -- add dpu_rm_pingpong_dsc_check() >> -- for pair allocation use i += 2 at for loop >> >> Changes in V2: >> -- split _dpu_rm_reserve_dsc() into _dpu_rm_reserve_dsc_single() and >> _dpu_rm_reserve_dsc_pair() >> >> Fixes: f2803ee91a41 ("drm/msm/disp/dpu1: Add DSC support in RM") >> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> >> --- >> drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c | 162 +++++++++++++++++++++++++++++---- >> 1 file changed, 146 insertions(+), 16 deletions(-) >> >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c >> index f9215643..7c7a88f 100644 >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c >> @@ -461,29 +461,159 @@ static int _dpu_rm_reserve_ctls( >> return 0; >> } >> >> -static int _dpu_rm_reserve_dsc(struct dpu_rm *rm, >> - struct dpu_global_state *global_state, >> - struct drm_encoder *enc, >> - const struct msm_display_topology *top) >> +static int _dpu_rm_pingpong_next_index(int start, >> + uint32_t enc_id, >> + uint32_t *pp_to_enc_id, >> + int pp_max) >> { >> - int num_dsc = top->num_dsc; >> int i; >> >> - /* check if DSC required are allocated or not */ >> - for (i = 0; i < num_dsc; i++) { >> - if (!rm->dsc_blks[i]) { >> - DPU_ERROR("DSC %d does not exist\n", i); >> - return -EIO; >> - } >> + for (i = start; i < pp_max; i++) { >> + if (pp_to_enc_id[i] == enc_id) >> + return i; >> + } >> + >> + return -ENAVAIL; >> +} >> + >> +static int _dpu_rm_pingpong_dsc_check(int dsc_idx, int pp_idx) >> +{ >> + > CHECK: Blank lines aren't necessary after an open brace '{' > #85: FILE: drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c:481: > >> + /* >> + * DSC with even index must be used with the PINGPONG with even index >> + * DSC with odd index must be used with the PINGPONG with odd index >> + */ >> + if ((dsc_idx & 0x01) != (pp_idx & 0x01)) >> + return -ENAVAIL; >> + >> + return 0; >> +} >> + >> +static int _dpu_rm_reserve_dsc_single(struct dpu_rm *rm, >> + struct dpu_global_state *global_state, >> + uint32_t enc_id, >> + const struct msm_display_topology *top) >> +{ >> + int num_dsc = 0; >> + uint32_t *pp_to_enc_id = global_state->pingpong_to_enc_id; >> + uint32_t *dsc_enc_id = global_state->dsc_to_enc_id; >> + int pp_max = PINGPONG_MAX - PINGPONG_0; >> + int pp_idx; >> + int dsc_idx; >> + int ret; >> + >> + for (dsc_idx = 0; dsc_idx < ARRAY_SIZE(rm->dsc_blks) && >> + num_dsc < 1; dsc_idx++) { > The condition is wrong here. Also it is misaligned. i will remove checking num_dsc < 1 here and add break at end of body of for loop since it only allocate one dsc > >> + if (!rm->dsc_blks[dsc_idx]) >> + continue; >> + >> + if (reserved_by_other(dsc_enc_id, dsc_idx, enc_id)) >> + continue; >> + >> + pp_idx = _dpu_rm_pingpong_next_index(0, enc_id, > And this is wrong too. You should start relatively to your previous PP index. It does not have previous pp_index since it only allocate on dsc. > >> + pp_to_enc_id, pp_max); >> + if (pp_idx < 0) >> + return -ENAVAIL; >> + >> + ret = _dpu_rm_pingpong_dsc_check(dsc_idx, pp_idx); >> + if (ret) >> + return -ENAVAIL; >> + >> + dsc_enc_id[dsc_idx] = enc_id; >> + num_dsc++; >> + } >> + >> + if (!num_dsc) { >> + DPU_ERROR("DSC allocation failed num_dsc=%d\n", num_dsc); >> + return -ENAVAIL; >> + } >> >> - if (global_state->dsc_to_enc_id[i]) { >> - DPU_ERROR("DSC %d is already allocated\n", i); >> - return -EIO; >> + return 0; >> +} >> + >> +static int _dpu_rm_reserve_dsc_pair(struct dpu_rm *rm, >> + struct dpu_global_state *global_state, >> + uint32_t enc_id, >> + const struct msm_display_topology *top) >> +{ >> + int num_dsc = 0; >> + uint32_t *pp_to_enc_id = global_state->pingpong_to_enc_id; >> + uint32_t *dsc_enc_id = global_state->dsc_to_enc_id; > No need for these anymore. Please inline them. Or simply pass > global_state to _dpu_rm_pingpong_next_index(). > Other functions in dpu_rm.c don't define local variables for these > arrays. I don't see why this patch should deviate from that. > >> + int pp_max = PINGPONG_MAX - PINGPONG_0; >> + int start_pp_idx = 0; >> + int dsc_idx, pp_idx; >> + int ret; >> + >> + /* only start from even dsc index */ >> + for (dsc_idx = 0; dsc_idx < ARRAY_SIZE(rm->dsc_blks) && >> + num_dsc < top->num_dsc; dsc_idx += 2) { > Misaligned > >> + if (!rm->dsc_blks[dsc_idx] || >> + !rm->dsc_blks[dsc_idx + 1]) >> + continue; >> + >> + /* consective dsc index to be paired */ >> + if (reserved_by_other(dsc_enc_id, dsc_idx, enc_id) || >> + reserved_by_other(dsc_enc_id, dsc_idx + 1, enc_id)) >> + continue; >> + >> + pp_idx = _dpu_rm_pingpong_next_index(start_pp_idx, enc_id, >> + pp_to_enc_id, pp_max); >> + if (pp_idx < 0) >> + return -ENAVAIL; >> + >> + ret = _dpu_rm_pingpong_dsc_check(dsc_idx, pp_idx); >> + if (ret) { >> + pp_idx = 0; >> + continue; >> } >> + >> + pp_idx = _dpu_rm_pingpong_next_index(pp_idx + 1, enc_id, >> + pp_to_enc_id, pp_max); >> + if (pp_idx < 0) >> + return -ENAVAIL; > Fresh pp_idx has to be checked against dsc_idx + 1. > > Let me also have a suggestion for you. The pp_max is a constant. You > don't have to pass it to _dpu_rm_pingpong_next_index() at all! Also if > you change the function to accept enum dpu_pingpong, you can start > with PINGPONG_NONE and move +1 into the function, making the callers > simpler, removing the need or start_pp_idx (which I asked to do in v4) > etc. > >> + >> + dsc_enc_id[dsc_idx] = enc_id; >> + dsc_enc_id[dsc_idx + 1] = enc_id; >> + num_dsc += 2; >> + >> + start_pp_idx = pp_idx + 1; /* start for next pair */ >> } >> >> - for (i = 0; i < num_dsc; i++) >> - global_state->dsc_to_enc_id[i] = enc->base.id; >> + if (num_dsc < top->num_dsc) { >> + DPU_ERROR("DSC allocation failed num_dsc=%d required=%d\n", >> + num_dsc, top->num_dsc); > Misaligned > >> + return -ENAVAIL; >> + } >> + >> + return 0; >> +} >> + >> +static int _dpu_rm_reserve_dsc(struct dpu_rm *rm, >> + struct dpu_global_state *global_state, >> + struct drm_encoder *enc, >> + const struct msm_display_topology *top) >> +{ >> + uint32_t enc_id = enc->base.id; >> + >> + if (!top->num_dsc || !top->num_intf) >> + return 0; >> + >> + /* >> + * Facts: >> + * 1) DSCs ouput to an interface > WARNING: 'ouput' may be misspelled - perhaps 'output'? > > Also, what does it bring to us? > >> + * 2) no pingpong split (two layer mixers shared one pingpong) >> + * 3) DSC pair start from even index, such as index(0,1), (2,3), etc > starts > >> + * 4) even PINGPONG connects to even DSC >> + * 5) odd PINGPONG connects to odd DSC >> + * 6) pair: encoder +--> pp_idx_0 --> dsc_idx_0 >> + * +--> pp_idx_1 --> dsc_idx_1 >> + */ >> + >> + /* num_dsc should be either 1, 2 or 4 */ >> + if (top->num_dsc > top->num_intf) /* merge mode */ >> + return _dpu_rm_reserve_dsc_pair(rm, global_state, enc_id, top); >> + else >> + return _dpu_rm_reserve_dsc_single(rm, global_state, enc_id, top); >> >> return 0; >> } >> -- >> 2.7.4 >> > Kuogee, we value your patches. But could you please fix your editor > settings to properly align C statements? E.g. Vim has the "set > cino=(0" setting, which does most of the work. I suspect that your > code editor should also have a similar setting. Also could you please > establish a practice of using checkpatch.pl at least until we stop > hitting obvious issues there? >
On Thu, 14 Dec 2023 at 19:34, Kuogee Hsieh <quic_khsieh@quicinc.com> wrote: > > > On 12/13/2023 3:00 PM, Dmitry Baryshkov wrote: > > On Wed, 13 Dec 2023 at 20:58, Kuogee Hsieh <quic_khsieh@quicinc.com> wrote: > >> At DSC V1.1 DCE (Display Compression Engine) contains a DSC encoder. > >> However, at DSC V1.2 DCE consists of two DSC encoders, one has an odd > >> index and another one has an even index. Each encoder can work > >> independently. But only two DSC encoders from same DCE can be paired > >> to work together to support DSC merge mode at DSC V1.2. For DSC V1.1 > >> two consecutive DSC encoders (start with even index) have to be paired > >> to support DSC merge mode. In addition, the DSC with even index have > >> to be mapped to even PINGPONG index and DSC with odd index have to be > >> mapped to odd PINGPONG index at its data path in regardless of DSC > >> V1.1 or V1.2. This patch improves DSC allocation mechanism with > >> consideration of those factors. > >> > >> Changes in V5: > >> -- delete dsc_id[] > >> -- update to global_state->dsc_to_enc_id[] directly > >> -- replace ndx with idx > >> -- fix indentation at function declaration > >> -- only one for loop at _dpu_rm_reserve_dsc_single() > >> > >> Changes in V4: > >> -- rework commit message > >> -- use reserved_by_other() > >> -- add _dpu_rm_pingpong_next_index() > >> -- revise _dpu_rm_pingpong_dsc_check() > >> > >> Changes in V3: > >> -- add dpu_rm_pingpong_dsc_check() > >> -- for pair allocation use i += 2 at for loop > >> > >> Changes in V2: > >> -- split _dpu_rm_reserve_dsc() into _dpu_rm_reserve_dsc_single() and > >> _dpu_rm_reserve_dsc_pair() > >> > >> Fixes: f2803ee91a41 ("drm/msm/disp/dpu1: Add DSC support in RM") > >> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> > >> --- > >> drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c | 162 +++++++++++++++++++++++++++++---- > >> 1 file changed, 146 insertions(+), 16 deletions(-) > >> > >> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c > >> index f9215643..7c7a88f 100644 > >> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c > >> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c > >> @@ -461,29 +461,159 @@ static int _dpu_rm_reserve_ctls( > >> return 0; > >> } > >> > >> -static int _dpu_rm_reserve_dsc(struct dpu_rm *rm, > >> - struct dpu_global_state *global_state, > >> - struct drm_encoder *enc, > >> - const struct msm_display_topology *top) > >> +static int _dpu_rm_pingpong_next_index(int start, > >> + uint32_t enc_id, > >> + uint32_t *pp_to_enc_id, > >> + int pp_max) > >> { > >> - int num_dsc = top->num_dsc; > >> int i; > >> > >> - /* check if DSC required are allocated or not */ > >> - for (i = 0; i < num_dsc; i++) { > >> - if (!rm->dsc_blks[i]) { > >> - DPU_ERROR("DSC %d does not exist\n", i); > >> - return -EIO; > >> - } > >> + for (i = start; i < pp_max; i++) { > >> + if (pp_to_enc_id[i] == enc_id) > >> + return i; > >> + } > >> + > >> + return -ENAVAIL; > >> +} > >> + > >> +static int _dpu_rm_pingpong_dsc_check(int dsc_idx, int pp_idx) > >> +{ > >> + > > CHECK: Blank lines aren't necessary after an open brace '{' > > #85: FILE: drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c:481: > > > >> + /* > >> + * DSC with even index must be used with the PINGPONG with even index > >> + * DSC with odd index must be used with the PINGPONG with odd index > >> + */ > >> + if ((dsc_idx & 0x01) != (pp_idx & 0x01)) > >> + return -ENAVAIL; > >> + > >> + return 0; > >> +} > >> + > >> +static int _dpu_rm_reserve_dsc_single(struct dpu_rm *rm, > >> + struct dpu_global_state *global_state, > >> + uint32_t enc_id, > >> + const struct msm_display_topology *top) > >> +{ > >> + int num_dsc = 0; > >> + uint32_t *pp_to_enc_id = global_state->pingpong_to_enc_id; > >> + uint32_t *dsc_enc_id = global_state->dsc_to_enc_id; > >> + int pp_max = PINGPONG_MAX - PINGPONG_0; > >> + int pp_idx; > >> + int dsc_idx; > >> + int ret; > >> + > >> + for (dsc_idx = 0; dsc_idx < ARRAY_SIZE(rm->dsc_blks) && > >> + num_dsc < 1; dsc_idx++) { > > The condition is wrong here. Also it is misaligned. > > i will remove checking num_dsc < 1 here and add break at end of body of > for loop since it only allocate one dsc I thought we established that in v4 or v3 that _single can get two DSC interfaces to be allocated. if (top->num_dsc > top->num_intf) /* merge mode */ return _dpu_rm_reserve_dsc_pair(rm, global_state, enc_id, top); else return _dpu_rm_reserve_dsc_single(rm, global_state, enc_id, top); Consider a bonded DSI panel (num_intf = 2) and two DSC encoders being requested (num_dsc = 2). The code goes to the _dpu_rm_reserve_dsc_single(). > > > > > >> + if (!rm->dsc_blks[dsc_idx]) > >> + continue; > >> + > >> + if (reserved_by_other(dsc_enc_id, dsc_idx, enc_id)) > >> + continue; > >> + > >> + pp_idx = _dpu_rm_pingpong_next_index(0, enc_id, > > And this is wrong too. You should start relatively to your previous PP index. > > It does not have previous pp_index since it only allocate on dsc. > > > > >> + pp_to_enc_id, pp_max); > >> + if (pp_idx < 0) > >> + return -ENAVAIL; > >> + > >> + ret = _dpu_rm_pingpong_dsc_check(dsc_idx, pp_idx); > >> + if (ret) > >> + return -ENAVAIL; > >> + > >> + dsc_enc_id[dsc_idx] = enc_id; > >> + num_dsc++; > >> + } > >> + > >> + if (!num_dsc) { > >> + DPU_ERROR("DSC allocation failed num_dsc=%d\n", num_dsc); > >> + return -ENAVAIL; > >> + } > >> > >> - if (global_state->dsc_to_enc_id[i]) { > >> - DPU_ERROR("DSC %d is already allocated\n", i); > >> - return -EIO; > >> + return 0; > >> +} > >> + > >> +static int _dpu_rm_reserve_dsc_pair(struct dpu_rm *rm, > >> + struct dpu_global_state *global_state, > >> + uint32_t enc_id, > >> + const struct msm_display_topology *top) > >> +{ > >> + int num_dsc = 0; > >> + uint32_t *pp_to_enc_id = global_state->pingpong_to_enc_id; > >> + uint32_t *dsc_enc_id = global_state->dsc_to_enc_id; > > No need for these anymore. Please inline them. Or simply pass > > global_state to _dpu_rm_pingpong_next_index(). > > Other functions in dpu_rm.c don't define local variables for these > > arrays. I don't see why this patch should deviate from that. > > > >> + int pp_max = PINGPONG_MAX - PINGPONG_0; > >> + int start_pp_idx = 0; > >> + int dsc_idx, pp_idx; > >> + int ret; > >> + > >> + /* only start from even dsc index */ > >> + for (dsc_idx = 0; dsc_idx < ARRAY_SIZE(rm->dsc_blks) && > >> + num_dsc < top->num_dsc; dsc_idx += 2) { > > Misaligned > > > >> + if (!rm->dsc_blks[dsc_idx] || > >> + !rm->dsc_blks[dsc_idx + 1]) > >> + continue; > >> + > >> + /* consective dsc index to be paired */ > >> + if (reserved_by_other(dsc_enc_id, dsc_idx, enc_id) || > >> + reserved_by_other(dsc_enc_id, dsc_idx + 1, enc_id)) > >> + continue; > >> + > >> + pp_idx = _dpu_rm_pingpong_next_index(start_pp_idx, enc_id, > >> + pp_to_enc_id, pp_max); > >> + if (pp_idx < 0) > >> + return -ENAVAIL; > >> + > >> + ret = _dpu_rm_pingpong_dsc_check(dsc_idx, pp_idx); > >> + if (ret) { > >> + pp_idx = 0; > >> + continue; > >> } > >> + > >> + pp_idx = _dpu_rm_pingpong_next_index(pp_idx + 1, enc_id, > >> + pp_to_enc_id, pp_max); > >> + if (pp_idx < 0) > >> + return -ENAVAIL; > > Fresh pp_idx has to be checked against dsc_idx + 1. > > > > Let me also have a suggestion for you. The pp_max is a constant. You > > don't have to pass it to _dpu_rm_pingpong_next_index() at all! Also if > > you change the function to accept enum dpu_pingpong, you can start > > with PINGPONG_NONE and move +1 into the function, making the callers > > simpler, removing the need or start_pp_idx (which I asked to do in v4) > > etc. > > > >> + > >> + dsc_enc_id[dsc_idx] = enc_id; > >> + dsc_enc_id[dsc_idx + 1] = enc_id; > >> + num_dsc += 2; > >> + > >> + start_pp_idx = pp_idx + 1; /* start for next pair */ > >> } > >> > >> - for (i = 0; i < num_dsc; i++) > >> - global_state->dsc_to_enc_id[i] = enc->base.id; > >> + if (num_dsc < top->num_dsc) { > >> + DPU_ERROR("DSC allocation failed num_dsc=%d required=%d\n", > >> + num_dsc, top->num_dsc); > > Misaligned > > > >> + return -ENAVAIL; > >> + } > >> + > >> + return 0; > >> +} > >> + > >> +static int _dpu_rm_reserve_dsc(struct dpu_rm *rm, > >> + struct dpu_global_state *global_state, > >> + struct drm_encoder *enc, > >> + const struct msm_display_topology *top) > >> +{ > >> + uint32_t enc_id = enc->base.id; > >> + > >> + if (!top->num_dsc || !top->num_intf) > >> + return 0; > >> + > >> + /* > >> + * Facts: > >> + * 1) DSCs ouput to an interface > > WARNING: 'ouput' may be misspelled - perhaps 'output'? > > > > Also, what does it bring to us? > > > >> + * 2) no pingpong split (two layer mixers shared one pingpong) > >> + * 3) DSC pair start from even index, such as index(0,1), (2,3), etc > > starts > > > >> + * 4) even PINGPONG connects to even DSC > >> + * 5) odd PINGPONG connects to odd DSC > >> + * 6) pair: encoder +--> pp_idx_0 --> dsc_idx_0 > >> + * +--> pp_idx_1 --> dsc_idx_1 > >> + */ > >> + > >> + /* num_dsc should be either 1, 2 or 4 */ > >> + if (top->num_dsc > top->num_intf) /* merge mode */ > >> + return _dpu_rm_reserve_dsc_pair(rm, global_state, enc_id, top); > >> + else > >> + return _dpu_rm_reserve_dsc_single(rm, global_state, enc_id, top); > >> > >> return 0; > >> } > >> -- > >> 2.7.4 > >> > > Kuogee, we value your patches. But could you please fix your editor > > settings to properly align C statements? E.g. Vim has the "set > > cino=(0" setting, which does most of the work. I suspect that your > > code editor should also have a similar setting. Also could you please > > establish a practice of using checkpatch.pl at least until we stop > > hitting obvious issues there? > >
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c index f9215643..7c7a88f 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c @@ -461,29 +461,159 @@ static int _dpu_rm_reserve_ctls( return 0; } -static int _dpu_rm_reserve_dsc(struct dpu_rm *rm, - struct dpu_global_state *global_state, - struct drm_encoder *enc, - const struct msm_display_topology *top) +static int _dpu_rm_pingpong_next_index(int start, + uint32_t enc_id, + uint32_t *pp_to_enc_id, + int pp_max) { - int num_dsc = top->num_dsc; int i; - /* check if DSC required are allocated or not */ - for (i = 0; i < num_dsc; i++) { - if (!rm->dsc_blks[i]) { - DPU_ERROR("DSC %d does not exist\n", i); - return -EIO; - } + for (i = start; i < pp_max; i++) { + if (pp_to_enc_id[i] == enc_id) + return i; + } + + return -ENAVAIL; +} + +static int _dpu_rm_pingpong_dsc_check(int dsc_idx, int pp_idx) +{ + + /* + * DSC with even index must be used with the PINGPONG with even index + * DSC with odd index must be used with the PINGPONG with odd index + */ + if ((dsc_idx & 0x01) != (pp_idx & 0x01)) + return -ENAVAIL; + + return 0; +} + +static int _dpu_rm_reserve_dsc_single(struct dpu_rm *rm, + struct dpu_global_state *global_state, + uint32_t enc_id, + const struct msm_display_topology *top) +{ + int num_dsc = 0; + uint32_t *pp_to_enc_id = global_state->pingpong_to_enc_id; + uint32_t *dsc_enc_id = global_state->dsc_to_enc_id; + int pp_max = PINGPONG_MAX - PINGPONG_0; + int pp_idx; + int dsc_idx; + int ret; + + for (dsc_idx = 0; dsc_idx < ARRAY_SIZE(rm->dsc_blks) && + num_dsc < 1; dsc_idx++) { + if (!rm->dsc_blks[dsc_idx]) + continue; + + if (reserved_by_other(dsc_enc_id, dsc_idx, enc_id)) + continue; + + pp_idx = _dpu_rm_pingpong_next_index(0, enc_id, + pp_to_enc_id, pp_max); + if (pp_idx < 0) + return -ENAVAIL; + + ret = _dpu_rm_pingpong_dsc_check(dsc_idx, pp_idx); + if (ret) + return -ENAVAIL; + + dsc_enc_id[dsc_idx] = enc_id; + num_dsc++; + } + + if (!num_dsc) { + DPU_ERROR("DSC allocation failed num_dsc=%d\n", num_dsc); + return -ENAVAIL; + } - if (global_state->dsc_to_enc_id[i]) { - DPU_ERROR("DSC %d is already allocated\n", i); - return -EIO; + return 0; +} + +static int _dpu_rm_reserve_dsc_pair(struct dpu_rm *rm, + struct dpu_global_state *global_state, + uint32_t enc_id, + const struct msm_display_topology *top) +{ + int num_dsc = 0; + uint32_t *pp_to_enc_id = global_state->pingpong_to_enc_id; + uint32_t *dsc_enc_id = global_state->dsc_to_enc_id; + int pp_max = PINGPONG_MAX - PINGPONG_0; + int start_pp_idx = 0; + int dsc_idx, pp_idx; + int ret; + + /* only start from even dsc index */ + for (dsc_idx = 0; dsc_idx < ARRAY_SIZE(rm->dsc_blks) && + num_dsc < top->num_dsc; dsc_idx += 2) { + if (!rm->dsc_blks[dsc_idx] || + !rm->dsc_blks[dsc_idx + 1]) + continue; + + /* consective dsc index to be paired */ + if (reserved_by_other(dsc_enc_id, dsc_idx, enc_id) || + reserved_by_other(dsc_enc_id, dsc_idx + 1, enc_id)) + continue; + + pp_idx = _dpu_rm_pingpong_next_index(start_pp_idx, enc_id, + pp_to_enc_id, pp_max); + if (pp_idx < 0) + return -ENAVAIL; + + ret = _dpu_rm_pingpong_dsc_check(dsc_idx, pp_idx); + if (ret) { + pp_idx = 0; + continue; } + + pp_idx = _dpu_rm_pingpong_next_index(pp_idx + 1, enc_id, + pp_to_enc_id, pp_max); + if (pp_idx < 0) + return -ENAVAIL; + + dsc_enc_id[dsc_idx] = enc_id; + dsc_enc_id[dsc_idx + 1] = enc_id; + num_dsc += 2; + + start_pp_idx = pp_idx + 1; /* start for next pair */ } - for (i = 0; i < num_dsc; i++) - global_state->dsc_to_enc_id[i] = enc->base.id; + if (num_dsc < top->num_dsc) { + DPU_ERROR("DSC allocation failed num_dsc=%d required=%d\n", + num_dsc, top->num_dsc); + return -ENAVAIL; + } + + return 0; +} + +static int _dpu_rm_reserve_dsc(struct dpu_rm *rm, + struct dpu_global_state *global_state, + struct drm_encoder *enc, + const struct msm_display_topology *top) +{ + uint32_t enc_id = enc->base.id; + + if (!top->num_dsc || !top->num_intf) + return 0; + + /* + * Facts: + * 1) DSCs ouput to an interface + * 2) no pingpong split (two layer mixers shared one pingpong) + * 3) DSC pair start from even index, such as index(0,1), (2,3), etc + * 4) even PINGPONG connects to even DSC + * 5) odd PINGPONG connects to odd DSC + * 6) pair: encoder +--> pp_idx_0 --> dsc_idx_0 + * +--> pp_idx_1 --> dsc_idx_1 + */ + + /* num_dsc should be either 1, 2 or 4 */ + if (top->num_dsc > top->num_intf) /* merge mode */ + return _dpu_rm_reserve_dsc_pair(rm, global_state, enc_id, top); + else + return _dpu_rm_reserve_dsc_single(rm, global_state, enc_id, top); return 0; }
At DSC V1.1 DCE (Display Compression Engine) contains a DSC encoder. However, at DSC V1.2 DCE consists of two DSC encoders, one has an odd index and another one has an even index. Each encoder can work independently. But only two DSC encoders from same DCE can be paired to work together to support DSC merge mode at DSC V1.2. For DSC V1.1 two consecutive DSC encoders (start with even index) have to be paired to support DSC merge mode. In addition, the DSC with even index have to be mapped to even PINGPONG index and DSC with odd index have to be mapped to odd PINGPONG index at its data path in regardless of DSC V1.1 or V1.2. This patch improves DSC allocation mechanism with consideration of those factors. Changes in V5: -- delete dsc_id[] -- update to global_state->dsc_to_enc_id[] directly -- replace ndx with idx -- fix indentation at function declaration -- only one for loop at _dpu_rm_reserve_dsc_single() Changes in V4: -- rework commit message -- use reserved_by_other() -- add _dpu_rm_pingpong_next_index() -- revise _dpu_rm_pingpong_dsc_check() Changes in V3: -- add dpu_rm_pingpong_dsc_check() -- for pair allocation use i += 2 at for loop Changes in V2: -- split _dpu_rm_reserve_dsc() into _dpu_rm_reserve_dsc_single() and _dpu_rm_reserve_dsc_pair() Fixes: f2803ee91a41 ("drm/msm/disp/dpu1: Add DSC support in RM") Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> --- drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c | 162 +++++++++++++++++++++++++++++---- 1 file changed, 146 insertions(+), 16 deletions(-)