[RFC,15/15] mfd: syscon: Fix build of missing ioremap on UM

Message ID	1782092.xMPH0kgtGM@wuerfel (mailing list archive)
State	Not Applicable, archived
Delegated to:	Andy Gross
Headers	show Return-Path: <linux-arm-msm-owner@kernel.org> From: Arnd Bergmann <arnd@arndb.de> To: linux-arm-kernel@lists.infradead.org Cc: k.kozlowski@samsung.com, daniel.lezcano@linaro.org, tglx@linutronix.de, dan.j.williams@intel.com, vinod.koul@intel.com, jason@lakedaemon.net, marc.zyngier@arm.com, mchehab@osg.samsung.com, lee.jones@linaro.org, peppe.cavallaro@st.com, kishon@ti.com, linus.walleij@linaro.org, sre@kernel.org, dbaryshkov@gmail.com, dwmw2@infradead.org, a.zummo@towertech.it, alexandre.belloni@free-electrons.com, andy.gross@linaro.org, david.brown@linaro.org, laurent.pinchart@ideasonboard.com, gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org, dmaengine@vger.kernel.org, linux-media@vger.kernel.org, linux-samsung-soc@vger.kernel.org, netdev@vger.kernel.org, linux-gpio@vger.kernel.org, linux-pm@vger.kernel.org, rtc-linux@googlegroups.com, linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org, devel@driverdev.osuosl.org, linux-usb@vger.kernel.org, Richard Weinberger <richard@nod.at> Subject: Re: [RFC 15/15] mfd: syscon: Fix build of missing ioremap on UM Date: Thu, 03 Mar 2016 11:50:54 +0100 Message-ID: <1782092.xMPH0kgtGM@wuerfel> User-Agent: KMail/4.11.5 (Linux/3.16.0-10-generic; KDE/4.11.5; x86_64; ; ) In-Reply-To: <1456992221-26712-16-git-send-email-k.kozlowski@samsung.com> References: <1456992221-26712-1-git-send-email-k.kozlowski@samsung.com> <1456992221-26712-16-git-send-email-k.kozlowski@samsung.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8BIT Content-Type: text/plain; charset="utf-8" Sender: linux-arm-msm-owner@vger.kernel.org Precedence: bulk

2016-03-03 19:50 GMT+09:00 Arnd Bergmann <arnd@arndb.de>: > On Thursday 03 March 2016 17:03:41 Krzysztof Kozlowski wrote: >> Since commit c89c0114955a ("mfd: syscon: Set regmap max_register in >> of_syscon_register") the syscon uses ioremap so it fails on COMPILE_TEST >> without HAS_IOMEM: >> >> drivers/mfd/syscon.c: In function ‘of_syscon_register’: >> drivers/mfd/syscon.c:67:9: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration] >> base = ioremap(res.start, resource_size(&res)); >> ^ >> drivers/mfd/syscon.c:67:7: warning: assignment makes pointer from integer without a cast [-Wint-conversion] >> base = ioremap(res.start, resource_size(&res)); >> ^ >> drivers/mfd/syscon.c:109:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] >> iounmap(base); >> >> When selecting MFD_SYSCON, depend on HAS_IOMEM to avoid unmet direct >> dependencies. >> >> Reported-by: kbuild test robot <lkp@intel.com> >> Fixes: c89c0114955a ("mfd: syscon: Set regmap max_register in of_syscon_register") >> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> >> --- > > Thanks for looking into this, the patches all look right to me, but > I fear we are forever playing catch-up here, as the number of syscon users > is only growing, and it's not obvious to the average driver developer > why they have to select this symbol. Actually I screwed something because entire MFD menuconfig (including MFD_SYSCON) is already guarded by if HAS_IOMEM. I was fixing the problem from the end (the build error) and then hit these unmet direct dependencies (mentioned this in other mail). I think this patch 15/15 is not needed. > > Interestingly, when I try to build an allmodconfig kernel for UML, > it seems to reject any driver calling ioremap/iounmap but not > the wrapper functions around that (of_iomap, devm_ioremap, > devm_ioremap_resource, ...) The declaration of devm-like functions is always there. However it should fail during linking stage (see my other patches like for thermal, nvram etc. this is still in progress because I did not manage to build allyesconfig on UML yet). > or the actual accessors that make no > sense without ioremap (readl, writel, inb, outb, iowrite32, ...). > > I've played with this a bit, and arrived at the patch below, is this > something we want as well? > > Arnd > >> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig >> index aa21dc55eb15..2e5b1e525a1d 100644 >> --- a/drivers/mfd/Kconfig >> +++ b/drivers/mfd/Kconfig >> @@ -1034,6 +1034,7 @@ config MFD_SUN6I_PRCM >> >> config MFD_SYSCON >> bool "System Controller Register R/W Based on Regmap" >> + depends on HAS_IOMEM >> select REGMAP_MMIO >> help >> Select this option to enable accessing system control registers >> > > > arch/um/include/asm/io.h | 1 + > drivers/char/Kconfig | 3 +++ > drivers/char/mem.c | 16 ++++++++++++++++ > drivers/clocksource/Kconfig | 3 +++ > drivers/fmc/Kconfig | 1 + > drivers/fpga/Kconfig | 1 + > drivers/hwtracing/intel_th/Kconfig | 1 + > drivers/mfd/Kconfig | 1 + > drivers/misc/altera-stapl/Kconfig | 2 +- > drivers/mtd/chips/Kconfig | 4 ++++ > drivers/mtd/lpddr/Kconfig | 1 + > drivers/mtd/maps/Kconfig | 3 ++- > drivers/mtd/nand/Kconfig | 2 +- > drivers/mtd/spi-nor/Kconfig | 1 + > drivers/net/can/Kconfig | 1 + > drivers/net/hamradio/Kconfig | 9 ++++++--- > drivers/nvmem/Kconfig | 1 + > drivers/phy/Kconfig | 9 +++++++-- > drivers/power/reset/Kconfig | 4 +++- > drivers/staging/comedi/Kconfig | 6 +++++- > drivers/thermal/Kconfig | 11 +++++++++-- For some of these I already started fixing: https://lkml.org/lkml/2016/3/3/147 http://comments.gmane.org/gmane.linux.kernel/2167664 > include/linux/irq.h | 2 ++ > include/linux/mtd/cfi.h | 2 ++ > include/linux/mtd/map.h | 2 ++ > kernel/resource.c | 2 ++ > lib/Kconfig | 7 ++++++- > mm/bootmem.c | 4 ++-- > 27 files changed, 85 insertions(+), 15 deletions(-) > > diff --git a/arch/um/include/asm/io.h b/arch/um/include/asm/io.h > new file mode 100644 > index 0000000..618ff13 > --- /dev/null > +++ b/arch/um/include/asm/io.h > @@ -0,0 +1 @@ > +/* no IOPORT or IOMEM suport */ > diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig > index a043107..f6dc17a 100644 > --- a/drivers/char/Kconfig > +++ b/drivers/char/Kconfig > @@ -8,6 +8,7 @@ source "drivers/tty/Kconfig" > > config DEVMEM > bool "/dev/mem virtual device support" > + depends on HAS_IOMEM > default y > help > Say Y here if you want to support the /dev/mem device. > @@ -17,6 +18,7 @@ config DEVMEM > > config DEVKMEM > bool "/dev/kmem virtual device support" > + depends on HAS_IOMEM > default y > help > Say Y here if you want to support the /dev/kmem device. The > @@ -94,6 +96,7 @@ config BFIN_OTP_WRITE_ENABLE > config PRINTER > tristate "Parallel printer support" > depends on PARPORT > + depends on HAS_IOPORT > ---help--- > If you intend to attach a printer to the parallel port of your Linux > box (as opposed to using a serial printer; if the connector at the > diff --git a/drivers/char/mem.c b/drivers/char/mem.c > index 4f6f94c..eedd129 100644 > --- a/drivers/char/mem.c > +++ b/drivers/char/mem.c > @@ -91,6 +91,7 @@ void __weak unxlate_dev_mem_ptr(phys_addr_t phys, void *addr) > } > #endif > > +#ifdef CONFIG_DEVMEM > /* > * This funcion reads the *physical* memory. The f_pos points directly to the > * memory location. > @@ -219,6 +220,7 @@ static ssize_t write_mem(struct file *file, const char __user *buf, > *ppos += written; > return written; > } > +#endif > > int __weak phys_mem_access_prot_allowed(struct file *file, > unsigned long pfn, unsigned long size, pgprot_t *vma_prot) > @@ -312,6 +314,7 @@ static inline int private_mapping_ok(struct vm_area_struct *vma) > } > #endif > > +#ifdef CONFIG_DEVMEM > static const struct vm_operations_struct mmap_mem_ops = { > #ifdef CONFIG_HAVE_IOREMAP_PROT > .access = generic_access_phys > @@ -351,7 +354,9 @@ static int mmap_mem(struct file *file, struct vm_area_struct *vma) > } > return 0; > } > +#endif > > +#ifdef CONFIG_DEVKMEM > static int mmap_kmem(struct file *file, struct vm_area_struct *vma) > { > unsigned long pfn; > @@ -552,7 +557,9 @@ static ssize_t write_kmem(struct file *file, const char __user *buf, > *ppos = p; > return virtr + wrote ? : err; > } > +#endif > > +#ifdef CONFIG_DEVPORT > static ssize_t read_port(struct file *file, char __user *buf, > size_t count, loff_t *ppos) > { > @@ -594,6 +601,7 @@ static ssize_t write_port(struct file *file, const char __user *buf, > *ppos = i; > return tmp-buf; > } > +#endif > > static ssize_t read_null(struct file *file, char __user *buf, > size_t count, loff_t *ppos) > @@ -710,10 +718,12 @@ static loff_t memory_lseek(struct file *file, loff_t offset, int orig) > return ret; > } > > +#ifdef CONFIG_DEVPORT > static int open_port(struct inode *inode, struct file *filp) > { > return capable(CAP_SYS_RAWIO) ? 0 : -EPERM; > } > +#endif > > #define zero_lseek null_lseek > #define full_lseek null_lseek > @@ -722,6 +732,7 @@ static int open_port(struct inode *inode, struct file *filp) > #define open_mem open_port > #define open_kmem open_mem > > +#ifdef CONFIG_DEVMEM > static const struct file_operations __maybe_unused mem_fops = { > .llseek = memory_lseek, > .read = read_mem, > @@ -733,7 +744,9 @@ static const struct file_operations __maybe_unused mem_fops = { > .mmap_capabilities = memory_mmap_capabilities, > #endif > }; > +#endif > > +#ifdef CONFIG_DEVKMEM > static const struct file_operations __maybe_unused kmem_fops = { > .llseek = memory_lseek, > .read = read_kmem, > @@ -745,6 +758,7 @@ static const struct file_operations __maybe_unused kmem_fops = { > .mmap_capabilities = memory_mmap_capabilities, > #endif > }; > +#endif > > static const struct file_operations null_fops = { > .llseek = null_lseek, > @@ -755,12 +769,14 @@ static const struct file_operations null_fops = { > .splice_write = splice_write_null, > }; > > +#ifdef CONFIG_DEVPORT > static const struct file_operations __maybe_unused port_fops = { > .llseek = memory_lseek, > .read = read_port, > .write = write_port, > .open = open_port, > }; > +#endif > > static const struct file_operations zero_fops = { > .llseek = zero_lseek, > diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig > index 33db740..6b58974 100644 > --- a/drivers/clocksource/Kconfig > +++ b/drivers/clocksource/Kconfig > @@ -38,6 +38,7 @@ config DIGICOLOR_TIMER > config DW_APB_TIMER > bool "DW APB timer driver" if COMPILE_TEST > depends on GENERIC_CLOCKEVENTS > + depends on HAS_IOMEM > help > Enables the support for the dw_apb timer. > > @@ -64,6 +65,7 @@ config ARMADA_370_XP_TIMER > config MESON6_TIMER > bool "Meson6 timer driver" if COMPILE_TEST > depends on GENERIC_CLOCKEVENTS > + depends on HAS_IOMEM > select CLKSRC_MMIO > help > Enables the support for the Meson6 timer driver. > @@ -114,6 +116,7 @@ config CADENCE_TTC_TIMER > config ASM9260_TIMER > bool "ASM9260 timer driver" if COMPILE_TEST > depends on GENERIC_CLOCKEVENTS > + depends on HAS_IOMEM > select CLKSRC_MMIO > select CLKSRC_OF > help > diff --git a/drivers/fmc/Kconfig b/drivers/fmc/Kconfig > index 3a75f42..adf1391 100644 > --- a/drivers/fmc/Kconfig > +++ b/drivers/fmc/Kconfig > @@ -4,6 +4,7 @@ > > menuconfig FMC > tristate "FMC support" > + depends on HAS_IOMEM > help > > FMC (FPGA Mezzanine Carrier) is a mechanical and electrical > diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig > index c9b9fdf..36c54af 100644 > --- a/drivers/fpga/Kconfig > +++ b/drivers/fpga/Kconfig > @@ -21,6 +21,7 @@ config FPGA_MGR_SOCFPGA > > config FPGA_MGR_ZYNQ_FPGA > tristate "Xilinx Zynq FPGA" > + depends on HAS_IOMEM > help > FPGA manager driver support for Xilinx Zynq FPGAs. > > diff --git a/drivers/hwtracing/intel_th/Kconfig b/drivers/hwtracing/intel_th/Kconfig > index b7a9073..467dae9 100644 > --- a/drivers/hwtracing/intel_th/Kconfig > +++ b/drivers/hwtracing/intel_th/Kconfig > @@ -1,5 +1,6 @@ > config INTEL_TH > tristate "Intel(R) Trace Hub controller" > + depends on HAS_IOMEM > help > Intel(R) Trace Hub (TH) is a set of hardware blocks (subdevices) that > produce, switch and output trace data from multiple hardware and > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index 9ca66de..6ff6246 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -999,6 +999,7 @@ config MFD_SUN6I_PRCM > > config MFD_SYSCON > bool "System Controller Register R/W Based on Regmap" > + depends on HAS_IOMEM This shouldn't be needed. There is if HAS_IOMEM at beginning. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

diff --git a/arch/um/include/asm/io.h b/arch/um/include/asm/io.h new file mode 100644 index 0000000..618ff13 --- /dev/null +++ b/arch/um/include/asm/io.h @@ -0,0 +1 @@ +/* no IOPORT or IOMEM suport */ diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index a043107..f6dc17a 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -8,6 +8,7 @@ source "drivers/tty/Kconfig" config DEVMEM bool "/dev/mem virtual device support" + depends on HAS_IOMEM default y help Say Y here if you want to support the /dev/mem device. @@ -17,6 +18,7 @@ config DEVMEM config DEVKMEM bool "/dev/kmem virtual device support" + depends on HAS_IOMEM default y help Say Y here if you want to support the /dev/kmem device. The @@ -94,6 +96,7 @@ config BFIN_OTP_WRITE_ENABLE config PRINTER tristate "Parallel printer support" depends on PARPORT + depends on HAS_IOPORT ---help--- If you intend to attach a printer to the parallel port of your Linux box (as opposed to using a serial printer; if the connector at the diff --git a/drivers/char/mem.c b/drivers/char/mem.c index 4f6f94c..eedd129 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -91,6 +91,7 @@ void __weak unxlate_dev_mem_ptr(phys_addr_t phys, void *addr) } #endif +#ifdef CONFIG_DEVMEM /* * This funcion reads the *physical* memory. The f_pos points directly to the * memory location. @@ -219,6 +220,7 @@ static ssize_t write_mem(struct file *file, const char __user *buf, *ppos += written; return written; } +#endif int __weak phys_mem_access_prot_allowed(struct file *file, unsigned long pfn, unsigned long size, pgprot_t *vma_prot) @@ -312,6 +314,7 @@ static inline int private_mapping_ok(struct vm_area_struct *vma) } #endif +#ifdef CONFIG_DEVMEM static const struct vm_operations_struct mmap_mem_ops = { #ifdef CONFIG_HAVE_IOREMAP_PROT .access = generic_access_phys @@ -351,7 +354,9 @@ static int mmap_mem(struct file *file, struct vm_area_struct *vma) } return 0; } +#endif +#ifdef CONFIG_DEVKMEM static int mmap_kmem(struct file *file, struct vm_area_struct *vma) { unsigned long pfn; @@ -552,7 +557,9 @@ static ssize_t write_kmem(struct file *file, const char __user *buf, *ppos = p; return virtr + wrote ? : err; } +#endif +#ifdef CONFIG_DEVPORT static ssize_t read_port(struct file *file, char __user *buf, size_t count, loff_t *ppos) { @@ -594,6 +601,7 @@ static ssize_t write_port(struct file *file, const char __user *buf, *ppos = i; return tmp-buf; } +#endif static ssize_t read_null(struct file *file, char __user *buf, size_t count, loff_t *ppos) @@ -710,10 +718,12 @@ static loff_t memory_lseek(struct file *file, loff_t offset, int orig) return ret; } +#ifdef CONFIG_DEVPORT static int open_port(struct inode *inode, struct file *filp) { return capable(CAP_SYS_RAWIO) ? 0 : -EPERM; } +#endif #define zero_lseek null_lseek #define full_lseek null_lseek @@ -722,6 +732,7 @@ static int open_port(struct inode *inode, struct file *filp) #define open_mem open_port #define open_kmem open_mem +#ifdef CONFIG_DEVMEM static const struct file_operations __maybe_unused mem_fops = { .llseek = memory_lseek, .read = read_mem, @@ -733,7 +744,9 @@ static const struct file_operations __maybe_unused mem_fops = { .mmap_capabilities = memory_mmap_capabilities, #endif }; +#endif +#ifdef CONFIG_DEVKMEM static const struct file_operations __maybe_unused kmem_fops = { .llseek = memory_lseek, .read = read_kmem, @@ -745,6 +758,7 @@ static const struct file_operations __maybe_unused kmem_fops = { .mmap_capabilities = memory_mmap_capabilities, #endif }; +#endif static const struct file_operations null_fops = { .llseek = null_lseek, @@ -755,12 +769,14 @@ static const struct file_operations null_fops = { .splice_write = splice_write_null, }; +#ifdef CONFIG_DEVPORT static const struct file_operations __maybe_unused port_fops = { .llseek = memory_lseek, .read = read_port, .write = write_port, .open = open_port, }; +#endif static const struct file_operations zero_fops = { .llseek = zero_lseek, diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 33db740..6b58974 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -38,6 +38,7 @@ config DIGICOLOR_TIMER config DW_APB_TIMER bool "DW APB timer driver" if COMPILE_TEST depends on GENERIC_CLOCKEVENTS + depends on HAS_IOMEM help Enables the support for the dw_apb timer. @@ -64,6 +65,7 @@ config ARMADA_370_XP_TIMER config MESON6_TIMER bool "Meson6 timer driver" if COMPILE_TEST depends on GENERIC_CLOCKEVENTS + depends on HAS_IOMEM select CLKSRC_MMIO help Enables the support for the Meson6 timer driver. @@ -114,6 +116,7 @@ config CADENCE_TTC_TIMER config ASM9260_TIMER bool "ASM9260 timer driver" if COMPILE_TEST depends on GENERIC_CLOCKEVENTS + depends on HAS_IOMEM select CLKSRC_MMIO select CLKSRC_OF help diff --git a/drivers/fmc/Kconfig b/drivers/fmc/Kconfig index 3a75f42..adf1391 100644 --- a/drivers/fmc/Kconfig +++ b/drivers/fmc/Kconfig @@ -4,6 +4,7 @@ menuconfig FMC tristate "FMC support" + depends on HAS_IOMEM help FMC (FPGA Mezzanine Carrier) is a mechanical and electrical diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig index c9b9fdf..36c54af 100644 --- a/drivers/fpga/Kconfig +++ b/drivers/fpga/Kconfig @@ -21,6 +21,7 @@ config FPGA_MGR_SOCFPGA config FPGA_MGR_ZYNQ_FPGA tristate "Xilinx Zynq FPGA" + depends on HAS_IOMEM help FPGA manager driver support for Xilinx Zynq FPGAs. diff --git a/drivers/hwtracing/intel_th/Kconfig b/drivers/hwtracing/intel_th/Kconfig index b7a9073..467dae9 100644 --- a/drivers/hwtracing/intel_th/Kconfig +++ b/drivers/hwtracing/intel_th/Kconfig @@ -1,5 +1,6 @@ config INTEL_TH tristate "Intel(R) Trace Hub controller" + depends on HAS_IOMEM help Intel(R) Trace Hub (TH) is a set of hardware blocks (subdevices) that produce, switch and output trace data from multiple hardware and diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 9ca66de..6ff6246 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -999,6 +999,7 @@ config MFD_SUN6I_PRCM config MFD_SYSCON bool "System Controller Register R/W Based on Regmap" + depends on HAS_IOMEM select REGMAP_MMIO help Select this option to enable accessing system control registers diff --git a/drivers/misc/altera-stapl/Kconfig b/drivers/misc/altera-stapl/Kconfig index 7f01d8e..c7e4c77 100644 --- a/drivers/misc/altera-stapl/Kconfig +++ b/drivers/misc/altera-stapl/Kconfig @@ -2,7 +2,7 @@ comment "Altera FPGA firmware download module" config ALTERA_STAPL tristate "Altera FPGA firmware download module" - depends on I2C + depends on I2C && HAS_IOPORT default n help An Altera FPGA module. Say Y when you want to support this tool. diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig index 3b3dabc..189ddce 100644 --- a/drivers/mtd/chips/Kconfig +++ b/drivers/mtd/chips/Kconfig @@ -3,6 +3,7 @@ menu "RAM/ROM/Flash chip drivers" config MTD_CFI tristate "Detect flash chips by Common Flash Interface (CFI) probe" + depends on HAS_IOMEM select MTD_GEN_PROBE select MTD_CFI_UTIL help @@ -15,6 +16,7 @@ config MTD_CFI config MTD_JEDECPROBE tristate "Detect non-CFI AMD/JEDEC-compatible flash chips" + depends on HAS_IOMEM select MTD_GEN_PROBE select MTD_CFI_UTIL help @@ -207,12 +209,14 @@ config MTD_CFI_UTIL config MTD_RAM tristate "Support for RAM chips in bus mapping" + depends on HAS_IOMEM help This option enables basic support for RAM chips accessed through a bus mapping driver. config MTD_ROM tristate "Support for ROM chips in bus mapping" + depends on HAS_IOMEM help This option enables basic support for ROM chips accessed through a bus mapping driver. diff --git a/drivers/mtd/lpddr/Kconfig b/drivers/mtd/lpddr/Kconfig index 3a19cbe..07dd95a 100644 --- a/drivers/mtd/lpddr/Kconfig +++ b/drivers/mtd/lpddr/Kconfig @@ -4,6 +4,7 @@ menu "LPDDR & LPDDR2 PCM memory drivers" config MTD_LPDDR tristate "Support for LPDDR flash chips" select MTD_QINFO_PROBE + depends on HAS_IOMEM help This option enables support of LPDDR (Low power double data rate) flash chips. Synonymous with Mobile-DDR. It is a new standard for diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 7c95a65..86a9604 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -3,7 +3,8 @@ menu "Mapping drivers for chip access" depends on HAS_IOMEM config MTD_COMPLEX_MAPPINGS - bool "Support non-linear mappings of flash chips" + bool "Support non-linear mappings of flash chips" if HAS_IOMEM + default !HAS_IOMEM help This causes the chip drivers to allow for complicated paged mappings of flash chips. diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 20f01b3..6ed3de7 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -12,7 +12,7 @@ config MTD_NAND_ECC_SMC menuconfig MTD_NAND tristate "NAND Device Support" - depends on MTD + depends on MTD && HAS_IOMEM select MTD_NAND_IDS select MTD_NAND_ECC help diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig index 0dc9275..83befab 100644 --- a/drivers/mtd/spi-nor/Kconfig +++ b/drivers/mtd/spi-nor/Kconfig @@ -9,6 +9,7 @@ if MTD_SPI_NOR config MTD_MT81xx_NOR tristate "Mediatek MT81xx SPI NOR flash controller" + depends on HAS_IOMEM help This enables access to SPI NOR flash, using MT81xx SPI NOR flash controller. This controller does not support generic SPI BUS, it only diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index 6d04183..b1e268b 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -132,6 +132,7 @@ config CAN_RCAR config CAN_SUN4I tristate "Allwinner A10 CAN controller" depends on MACH_SUN4I || MACH_SUN7I || COMPILE_TEST + depends on HAS_IOMEM ---help--- Say Y here if you want to use CAN controller found on Allwinner A10/A20 SoCs. diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig index bf5e596..507f7a5 100644 --- a/drivers/net/hamradio/Kconfig +++ b/drivers/net/hamradio/Kconfig @@ -113,7 +113,8 @@ config SCC_TRXECHO config BAYCOM_SER_FDX tristate "BAYCOM ser12 fullduplex driver for AX.25" - depends on AX25 && !S390 + depends on AX25 + depends on HAS_IOPORT select CRC_CCITT ---help--- This is one of two drivers for Baycom style simple amateur radio @@ -133,7 +134,8 @@ config BAYCOM_SER_FDX config BAYCOM_SER_HDX tristate "BAYCOM ser12 halfduplex driver for AX.25" - depends on AX25 && !S390 + depends on AX25 + depends on HAS_IOPORT select CRC_CCITT ---help--- This is one of two drivers for Baycom style simple amateur radio @@ -181,7 +183,8 @@ config BAYCOM_EPP config YAM tristate "YAM driver for AX.25" - depends on AX25 && !S390 + depends on AX25 + depends on HAS_IOPORT help The YAM is a modem for packet radio which connects to the serial port and includes some of the functions of a Terminal Node diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig index bc4ea58..6ef3d0a 100644 --- a/drivers/nvmem/Kconfig +++ b/drivers/nvmem/Kconfig @@ -1,6 +1,7 @@ menuconfig NVMEM tristate "NVMEM Support" select REGMAP + depends on HAS_IOMEM help Support for NVMEM(Non Volatile Memory) devices like EEPROM, EFUSES... diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index e7e117d..d2216df 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -30,9 +30,10 @@ config PHY_BERLIN_SATA Enable this to support the SATA PHY on Marvell Berlin SoCs. config ARMADA375_USBCLUSTER_PHY - def_bool y - depends on MACH_ARMADA_375 || COMPILE_TEST + bool "ARMADA 375 USB cluster PHY driver" if COMPILE_TEST && !MACH_ARMADA_375 + def_bool MACH_ARMADA_375 depends on OF + depends on HAS_IOMEM select GENERIC_PHY config PHY_DM816X_USB @@ -128,6 +129,7 @@ config PHY_RCAR_GEN3_USB2 config OMAP_CONTROL_PHY tristate "OMAP CONTROL PHY Driver" depends on ARCH_OMAP2PLUS || COMPILE_TEST + depends on HAS_IOMEM help Enable this to add support for the PHY part present in the control module. This driver has API to power on the USB2 PHY and to write to @@ -224,6 +226,8 @@ config PHY_MT65XX_USB3 config PHY_HI6220_USB tristate "hi6220 USB PHY support" + depends on ARM64 || COMPILE_TEST + depends on HAS_IOMEM select GENERIC_PHY select MFD_SYSCON help @@ -401,6 +405,7 @@ config PHY_CYGNUS_PCIE tristate "Broadcom Cygnus PCIe PHY driver" depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST) select GENERIC_PHY + depends on HAS_IOMEM default ARCH_BCM_CYGNUS help Enable this to support the Broadcom Cygnus PCIe PHY. diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index 1131cf7..bb5bd1b 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -41,7 +41,7 @@ config POWER_RESET_AXXIA config POWER_RESET_BRCMSTB bool "Broadcom STB reset driver" depends on ARM || MIPS || COMPILE_TEST - depends on MFD_SYSCON + depends on MFD_SYSCON && HAS_IOMEM default ARCH_BRCMSTB help This driver provides restart support for Broadcom STB boards. @@ -148,6 +148,7 @@ config POWER_RESET_KEYSTONE config POWER_RESET_SYSCON bool "Generic SYSCON regmap reset driver" depends on OF + depends on HAS_IOMEM select MFD_SYSCON help Reboot support for generic SYSCON mapped register reset. @@ -155,6 +156,7 @@ config POWER_RESET_SYSCON config POWER_RESET_SYSCON_POWEROFF bool "Generic SYSCON regmap poweroff driver" depends on OF + depends on HAS_IOMEM select MFD_SYSCON help Poweroff support for generic SYSCON mapped register poweroff. diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig index e7255f8..e1ba4aa 100644 --- a/drivers/staging/comedi/Kconfig +++ b/drivers/staging/comedi/Kconfig @@ -67,6 +67,7 @@ config COMEDI_TEST config COMEDI_PARPORT tristate "Parallel port support" + depends on HAS_IOPORT ---help--- Enable support for the standard parallel port. A cheap and easy way to get a few more digital I/O lines. Steal @@ -87,6 +88,7 @@ config COMEDI_SERIAL2002 config COMEDI_SSV_DNP tristate "SSV Embedded Systems DIL/Net-PC support" depends on X86_32 || COMPILE_TEST + depends on HAS_IOPORT ---help--- Enable support for SSV Embedded Systems DIL/Net-PC @@ -97,6 +99,7 @@ endif # COMEDI_MISC_DRIVERS menuconfig COMEDI_ISA_DRIVERS bool "Comedi ISA and PC/104 drivers" + depends on HAS_IOPORT ---help--- Enable comedi ISA and PC/104 drivers to be built @@ -1110,7 +1113,7 @@ endif # COMEDI_PCI_DRIVERS menuconfig COMEDI_PCMCIA_DRIVERS tristate "Comedi PCMCIA drivers" - depends on PCMCIA + depends on PCMCIA && HAS_IOPORT ---help--- Enable support for comedi PCMCIA drivers. @@ -1262,6 +1265,7 @@ config COMEDI_8255 config COMEDI_8255_SA tristate "Standalone 8255 support" select COMEDI_8255 + depends on HAS_IOPORT ---help--- Enable support for 8255 digital I/O as a standalone driver. diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 8cc4ac6..31ae027 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -178,6 +178,7 @@ config THERMAL_EMULATION config HISI_THERMAL tristate "Hisilicon thermal driver" depends on (ARCH_HISI && CPU_THERMAL && OF) || COMPILE_TEST + depends on HAS_IOMEM help Enable this to plug hisilicon's thermal sensor driver into the Linux thermal framework. cpufreq is used as the cooling device to throttle @@ -198,6 +199,7 @@ config SPEAR_THERMAL bool "SPEAr thermal sensor driver" depends on PLAT_SPEAR || COMPILE_TEST depends on OF + depends on HAS_IOMEM help Enable this to plug the SPEAr thermal sensor driver into the Linux thermal framework. @@ -206,6 +208,7 @@ config ROCKCHIP_THERMAL tristate "Rockchip thermal driver" depends on ARCH_ROCKCHIP || COMPILE_TEST depends on RESET_CONTROLLER + depends on HAS_IOMEM help Rockchip thermal driver provides support for Temperature sensor ADC (TS-ADC) found on Rockchip SoCs. It supports one critical @@ -216,6 +219,7 @@ config RCAR_THERMAL tristate "Renesas R-Car thermal driver" depends on ARCH_SHMOBILE || COMPILE_TEST depends on HAS_IOMEM + depends on HAS_IOMEM help Enable this to plug the R-Car thermal sensor driver into the Linux thermal framework. @@ -223,6 +227,7 @@ config RCAR_THERMAL config KIRKWOOD_THERMAL tristate "Temperature sensor on Marvell Kirkwood SoCs" depends on MACH_KIRKWOOD || COMPILE_TEST + depends on HAS_IOMEM depends on OF help Support for the Kirkwood thermal sensor driver into the Linux thermal @@ -231,6 +236,7 @@ config KIRKWOOD_THERMAL config DOVE_THERMAL tristate "Temperature sensor on Marvell Dove SoCs" depends on ARCH_DOVE || MACH_DOVE || COMPILE_TEST + depends on HAS_IOMEM depends on OF help Support for the Dove thermal sensor driver in the Linux thermal @@ -249,6 +255,7 @@ config DB8500_THERMAL config ARMADA_THERMAL tristate "Armada 370/XP thermal management" depends on ARCH_MVEBU || COMPILE_TEST + depends on HAS_IOMEM depends on OF help Enable this option if you want to have support for thermal management @@ -366,12 +373,12 @@ config INTEL_PCH_THERMAL programmable trip points and other information. menu "Texas Instruments thermal drivers" -depends on ARCH_HAS_BANDGAP || COMPILE_TEST +depends on ARCH_HAS_BANDGAP || (COMPILE_TEST && HAS_IOMEM) source "drivers/thermal/ti-soc-thermal/Kconfig" endmenu menu "Samsung thermal drivers" -depends on ARCH_EXYNOS || COMPILE_TEST +depends on ARCH_EXYNOS || (COMPILE_TEST && HAS_IOMEM) source "drivers/thermal/samsung/Kconfig" endmenu diff --git a/include/linux/irq.h b/include/linux/irq.h index 3c1c967..a5d0f12 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -916,6 +916,7 @@ static inline void irq_gc_lock(struct irq_chip_generic *gc) { } static inline void irq_gc_unlock(struct irq_chip_generic *gc) { } #endif +#ifdef CONFIG_HAS_IOMEM static inline void irq_reg_writel(struct irq_chip_generic *gc, u32 val, int reg_offset) { @@ -933,5 +934,6 @@ static inline u32 irq_reg_readl(struct irq_chip_generic *gc, else return readl(gc->reg_base + reg_offset); } +#endif #endif /* _LINUX_IRQ_H */ diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h index 9b57a9b..d5db153 100644 --- a/include/linux/mtd/cfi.h +++ b/include/linux/mtd/cfi.h @@ -310,6 +310,7 @@ uint32_t cfi_send_gen_cmd(u_char cmd, uint32_t cmd_addr, uint32_t base, struct map_info *map, struct cfi_private *cfi, int type, map_word *prev_val); +#ifdef CONFIG_HAS_IOMEM static inline uint8_t cfi_read_query(struct map_info *map, uint32_t addr) { map_word val = map_read(map, addr); @@ -341,6 +342,7 @@ static inline uint16_t cfi_read_query16(struct map_info *map, uint32_t addr) return cfi32_to_cpu(map, val.x[0]); } } +#endif void cfi_udelay(int us); diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h index 58f3ba7..07c0d497 100644 --- a/include/linux/mtd/map.h +++ b/include/linux/mtd/map.h @@ -410,6 +410,7 @@ static inline map_word map_word_ff(struct map_info *map) return r; } +#ifdef CONFIG_HAS_IOMEM static inline map_word inline_map_read(struct map_info *map, unsigned long ofs) { map_word r; @@ -463,6 +464,7 @@ static inline void inline_map_copy_to(struct map_info *map, unsigned long to, co { memcpy_toio(map->virt + to, from, len); } +#endif #ifdef CONFIG_MTD_COMPLEX_MAPPINGS #define map_read(map, ofs) (map)->read(map, ofs) diff --git a/kernel/resource.c b/kernel/resource.c index 09c0597..efd5c9e 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -29,7 +29,9 @@ struct resource ioport_resource = { .name = "PCI IO", .start = 0, +#ifdef CONFIG_HAS_IOPORT .end = IO_SPACE_LIMIT, +#endif .flags = IORESOURCE_IO, }; EXPORT_SYMBOL(ioport_resource); diff --git a/lib/Kconfig b/lib/Kconfig index 133ebc0..38ff36d 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -382,9 +382,14 @@ config HAS_IOMEM select GENERIC_IO default y +config HAS_IOPORT + bool + depends on HAS_IOMEM && !NO_IOPORT + default y + config HAS_IOPORT_MAP bool - depends on HAS_IOMEM && !NO_IOPORT_MAP + depends on HAS_IOMEM && HAS_IOPORT && !NO_IOPORT_MAP default y config HAS_DMA diff --git a/mm/bootmem.c b/mm/bootmem.c index 91e32bc..3471237 100644 --- a/mm/bootmem.c +++ b/mm/bootmem.c @@ -99,7 +99,7 @@ static unsigned long __init init_bootmem_core(bootmem_data_t *bdata, unsigned long mapsize; mminit_validate_memmodel_limits(&start, &end); - bdata->node_bootmem_map = phys_to_virt(PFN_PHYS(mapstart)); + bdata->node_bootmem_map = __va(PFN_PHYS(mapstart)); bdata->node_min_pfn = start; bdata->node_low_pfn = end; link_bootmem(bdata); @@ -585,7 +585,7 @@ find_block: PFN_UP(end_off), BOOTMEM_EXCLUSIVE)) BUG(); - region = phys_to_virt(PFN_PHYS(bdata->node_min_pfn) + + region = __va(PFN_PHYS(bdata->node_min_pfn) + start_off); memset(region, 0, size); /*

[RFC,15/15] mfd: syscon: Fix build of missing ioremap on UM

Commit Message

Comments

Patch