| Message ID | 1bda63e18f7257f60cc1082b423aca129abfa3b0.1682682753.git.quic_varada@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Enable IPQ9574 TSENS support | expand |
On Fri, 28 Apr 2023 at 17:53, Varadarajan Narayanan <quic_varada@quicinc.com> wrote: > > This patch adds thermal zone nodes for the various > sensors present in IPQ9574 > > Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > --- > arch/arm64/boot/dts/qcom/ipq9574.dtsi | 208 ++++++++++++++++++++++++++++++++++ > 1 file changed, 208 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi > index 7cd5bdb..a7cb2b4c 100644 > --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi > +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi > @@ -947,6 +947,214 @@ > }; > }; > > + thermal_zones: thermal-zones { > + tsens_tz_sensor3 { Please provide sensible names for all thermal zones. Please follow the examples in other DT files. > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&tsens 3>; > + > + trips { > + cpu-critical { > + temperature = <125000>; Can it really go up to 125 °C? > + hysteresis = <1000>; > + type = "critical"; > + }; Please provide also a passive trip point, so that the passive cooling can be engaged. > + }; > + }; > + > + tsens_tz_sensor4 { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&tsens 4>; > + > + trips { > + cpu-critical { > + temperature = <125000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + }; > + > + tsens_tz_sensor5 { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&tsens 5>; > + > + trips { > + cpu-critical { > + temperature = <125000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + }; > + > + tsens_tz_sensor6 { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&tsens 6>; > + > + trips { > + cpu-critical { > + temperature = <125000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + }; > + > + tsens_tz_sensor7 { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&tsens 7>; > + > + trips { > + cpu-critical { > + temperature = <125000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + }; > + > + tsens_tz_sensor8 { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&tsens 8>; > + > + trips { > + cpu-critical { > + temperature = <125000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + }; > + > + tsens_tz_sensor9 { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&tsens 9>; > + > + trips { > + cpu-critical { > + temperature = <125000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + }; > + > + tsens_tz_sensor10 { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&tsens 10>; > + > + trips { > + cpu-critical { > + temperature = <120000>; > + hysteresis = <10000>; > + type = "critical"; > + }; > + > + cpu-passive { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "passive"; > + }; > + }; > + }; > + > + tsens_tz_sensor11 { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&tsens 11>; > + > + trips { > + cpu-critical { > + temperature = <120000>; > + hysteresis = <10000>; > + type = "critical"; > + }; > + > + cpu-passive { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "passive"; > + }; > + }; > + }; > + > + tsens_tz_sensor12 { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&tsens 12>; > + > + trips { > + cpu-critical { > + temperature = <120000>; > + hysteresis = <10000>; > + type = "critical"; > + }; > + > + cpu-passive { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "passive"; > + }; > + }; > + }; > + > + tsens_tz_sensor13 { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&tsens 13>; > + > + trips { > + cpu-critical { > + temperature = <120000>; > + hysteresis = <10000>; > + type = "critical"; > + }; > + > + cpu-passive { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "passive"; > + }; > + }; > + }; > + > + tsens_tz_sensor14 { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&tsens 14>; > + > + trips { > + cpu-critical { > + temperature = <125000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + }; > + > + tsens_tz_sensor15 { > + polling-delay-passive = <0>; > + polling-delay = <0>; > + thermal-sensors = <&tsens 15>; > + > + trips { > + cpu-critical { > + temperature = <125000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + }; > + }; > + > timer { > compatible = "arm,armv8-timer"; > interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > -- > 2.7.4 >
On 28/04/2023 16:52, Varadarajan Narayanan wrote: > This patch adds thermal zone nodes for the various > sensors present in IPQ9574 > > Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > --- > arch/arm64/boot/dts/qcom/ipq9574.dtsi | 208 ++++++++++++++++++++++++++++++++++ > 1 file changed, 208 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi > index 7cd5bdb..a7cb2b4c 100644 > --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi > +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi > @@ -947,6 +947,214 @@ > }; > }; > > + thermal_zones: thermal-zones { > + tsens_tz_sensor3 { No underscores in node names. Don't invent your own names, use the ones we already have everywhere. Best regards, Krzysztof
On Fri, Apr 28, 2023 at 10:49:34PM +0300, Dmitry Baryshkov wrote: > On Fri, 28 Apr 2023 at 17:53, Varadarajan Narayanan > <quic_varada@quicinc.com> wrote: > > > > This patch adds thermal zone nodes for the various > > sensors present in IPQ9574 > > > > Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com> > > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > > --- > > arch/arm64/boot/dts/qcom/ipq9574.dtsi | 208 ++++++++++++++++++++++++++++++++++ > > 1 file changed, 208 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi > > index 7cd5bdb..a7cb2b4c 100644 > > --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi > > +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi > > @@ -947,6 +947,214 @@ > > }; > > }; > > > > + thermal_zones: thermal-zones { > > + tsens_tz_sensor3 { > > Please provide sensible names for all thermal zones. Please follow the > examples in other DT files. Ok. > > + polling-delay-passive = <0>; > > + polling-delay = <0>; > > + thermal-sensors = <&tsens 3>; > > + > > + trips { > > + cpu-critical { > > + temperature = <125000>; > > Can it really go up to 125 °C? The SoC product requirement is 120°C. It is capable of 125°C. This was tested inside a thermal chamber and ensured that it hits 125°C and system reboots at that temperature. > > + hysteresis = <1000>; > > + type = "critical"; > > + }; > > Please provide also a passive trip point, so that the passive cooling > can be engaged. The linux kernel cannot take any steps to initiate cooling for components other than the 4 CPU cores. The f/w that runs on these IP blocks have to take steps to initiate cooling. Additionally, the passive temperature for the non-cpu sensors are not characterised yet and I don't have the values now. We have these nodes to be able to read the temperature of the other blocks via the sysfs entry /sys/devices/virtual/thermal/*/temp Have given the critical trip point so that the setup is rebooted if the critical temperature is reached. Have given passive trip point for the CPU core related thermal nodes (tsens_tz_sensor10, tsens_tz_sensor11, tsens_tz_sensor12 and tsens_tz_sensor13). If this is not acceptable, please let me know. Will remove the non-cpu nodes and post a patch with just the CPU entries. Thanks Varada > > + }; > > + }; > > + > > + tsens_tz_sensor4 { > > + polling-delay-passive = <0>; > > + polling-delay = <0>; > > + thermal-sensors = <&tsens 4>; > > + > > + trips { > > + cpu-critical { > > + temperature = <125000>; > > + hysteresis = <1000>; > > + type = "critical"; > > + }; > > + }; > > + }; > > + > > + tsens_tz_sensor5 { > > + polling-delay-passive = <0>; > > + polling-delay = <0>; > > + thermal-sensors = <&tsens 5>; > > + > > + trips { > > + cpu-critical { > > + temperature = <125000>; > > + hysteresis = <1000>; > > + type = "critical"; > > + }; > > + }; > > + }; > > + > > + tsens_tz_sensor6 { > > + polling-delay-passive = <0>; > > + polling-delay = <0>; > > + thermal-sensors = <&tsens 6>; > > + > > + trips { > > + cpu-critical { > > + temperature = <125000>; > > + hysteresis = <1000>; > > + type = "critical"; > > + }; > > + }; > > + }; > > + > > + tsens_tz_sensor7 { > > + polling-delay-passive = <0>; > > + polling-delay = <0>; > > + thermal-sensors = <&tsens 7>; > > + > > + trips { > > + cpu-critical { > > + temperature = <125000>; > > + hysteresis = <1000>; > > + type = "critical"; > > + }; > > + }; > > + }; > > + > > + tsens_tz_sensor8 { > > + polling-delay-passive = <0>; > > + polling-delay = <0>; > > + thermal-sensors = <&tsens 8>; > > + > > + trips { > > + cpu-critical { > > + temperature = <125000>; > > + hysteresis = <1000>; > > + type = "critical"; > > + }; > > + }; > > + }; > > + > > + tsens_tz_sensor9 { > > + polling-delay-passive = <0>; > > + polling-delay = <0>; > > + thermal-sensors = <&tsens 9>; > > + > > + trips { > > + cpu-critical { > > + temperature = <125000>; > > + hysteresis = <1000>; > > + type = "critical"; > > + }; > > + }; > > + }; > > + > > + tsens_tz_sensor10 { > > + polling-delay-passive = <0>; > > + polling-delay = <0>; > > + thermal-sensors = <&tsens 10>; > > + > > + trips { > > + cpu-critical { > > + temperature = <120000>; > > + hysteresis = <10000>; > > + type = "critical"; > > + }; > > + > > + cpu-passive { > > + temperature = <110000>; > > + hysteresis = <1000>; > > + type = "passive"; > > + }; > > + }; > > + }; > > + > > + tsens_tz_sensor11 { > > + polling-delay-passive = <0>; > > + polling-delay = <0>; > > + thermal-sensors = <&tsens 11>; > > + > > + trips { > > + cpu-critical { > > + temperature = <120000>; > > + hysteresis = <10000>; > > + type = "critical"; > > + }; > > + > > + cpu-passive { > > + temperature = <110000>; > > + hysteresis = <1000>; > > + type = "passive"; > > + }; > > + }; > > + }; > > + > > + tsens_tz_sensor12 { > > + polling-delay-passive = <0>; > > + polling-delay = <0>; > > + thermal-sensors = <&tsens 12>; > > + > > + trips { > > + cpu-critical { > > + temperature = <120000>; > > + hysteresis = <10000>; > > + type = "critical"; > > + }; > > + > > + cpu-passive { > > + temperature = <110000>; > > + hysteresis = <1000>; > > + type = "passive"; > > + }; > > + }; > > + }; > > + > > + tsens_tz_sensor13 { > > + polling-delay-passive = <0>; > > + polling-delay = <0>; > > + thermal-sensors = <&tsens 13>; > > + > > + trips { > > + cpu-critical { > > + temperature = <120000>; > > + hysteresis = <10000>; > > + type = "critical"; > > + }; > > + > > + cpu-passive { > > + temperature = <110000>; > > + hysteresis = <1000>; > > + type = "passive"; > > + }; > > + }; > > + }; > > + > > + tsens_tz_sensor14 { > > + polling-delay-passive = <0>; > > + polling-delay = <0>; > > + thermal-sensors = <&tsens 14>; > > + > > + trips { > > + cpu-critical { > > + temperature = <125000>; > > + hysteresis = <1000>; > > + type = "critical"; > > + }; > > + }; > > + }; > > + > > + tsens_tz_sensor15 { > > + polling-delay-passive = <0>; > > + polling-delay = <0>; > > + thermal-sensors = <&tsens 15>; > > + > > + trips { > > + cpu-critical { > > + temperature = <125000>; > > + hysteresis = <1000>; > > + type = "critical"; > > + }; > > + }; > > + }; > > + }; > > + > > timer { > > compatible = "arm,armv8-timer"; > > interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > > -- > > 2.7.4 > > > > > -- > With best wishes > Dmitry
On Mon, May 01, 2023 at 09:14:32AM +0200, Krzysztof Kozlowski wrote: > On 28/04/2023 16:52, Varadarajan Narayanan wrote: > > This patch adds thermal zone nodes for the various > > sensors present in IPQ9574 > > > > Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com> > > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > > --- > > arch/arm64/boot/dts/qcom/ipq9574.dtsi | 208 ++++++++++++++++++++++++++++++++++ > > 1 file changed, 208 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi > > index 7cd5bdb..a7cb2b4c 100644 > > --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi > > +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi > > @@ -947,6 +947,214 @@ > > }; > > }; > > > > + thermal_zones: thermal-zones { > > + tsens_tz_sensor3 { > > No underscores in node names. > > Don't invent your own names, use the ones we already have everywhere. Thanks for the feedback. Will change and post and new version. -Varada > > Best regards, > Krzysztof >
On Tue, 2 May 2023 at 11:04, Varadarajan Narayanan <quic_varada@quicinc.com> wrote: > > On Fri, Apr 28, 2023 at 10:49:34PM +0300, Dmitry Baryshkov wrote: > > On Fri, 28 Apr 2023 at 17:53, Varadarajan Narayanan > > <quic_varada@quicinc.com> wrote: > > > > > > This patch adds thermal zone nodes for the various > > > sensors present in IPQ9574 > > > > > > Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com> > > > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > > > --- > > > arch/arm64/boot/dts/qcom/ipq9574.dtsi | 208 ++++++++++++++++++++++++++++++++++ > > > 1 file changed, 208 insertions(+) > > > > > > diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi > > > index 7cd5bdb..a7cb2b4c 100644 > > > --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi > > > +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi > > > @@ -947,6 +947,214 @@ > > > }; > > > }; > > > > > > + thermal_zones: thermal-zones { > > > + tsens_tz_sensor3 { > > > > Please provide sensible names for all thermal zones. Please follow the > > examples in other DT files. > > Ok. > > > > + polling-delay-passive = <0>; > > > + polling-delay = <0>; > > > + thermal-sensors = <&tsens 3>; > > > + > > > + trips { > > > + cpu-critical { > > > + temperature = <125000>; > > > > Can it really go up to 125 °C? > > The SoC product requirement is 120°C. It is capable of 125°C. > This was tested inside a thermal chamber and ensured that it > hits 125°C and system reboots at that temperature. ack > > > > + hysteresis = <1000>; > > > + type = "critical"; > > > + }; > > > > Please provide also a passive trip point, so that the passive cooling > > can be engaged. > > The linux kernel cannot take any steps to initiate cooling for > components other than the 4 CPU cores. The f/w that runs on these > IP blocks have to take steps to initiate cooling. Additionally, > the passive temperature for the non-cpu sensors are not > characterised yet and I don't have the values now. > > We have these nodes to be able to read the temperature of the > other blocks via the sysfs entry /sys/devices/virtual/thermal/*/temp > Have given the critical trip point so that the setup is rebooted > if the critical temperature is reached. > > Have given passive trip point for the CPU core related thermal > nodes (tsens_tz_sensor10, tsens_tz_sensor11, tsens_tz_sensor12 > and tsens_tz_sensor13). That's the point why we asked for the logical names for the sensors, like we have on the other platforms. Otherwise it is very hard to understand what is going on. > > If this is not acceptable, please let me know. Will remove the > non-cpu nodes and post a patch with just the CPU entries. This is perfectly fine. Please take a look at other DTSI files. > > Thanks > Varada > > > > + }; > > > + }; > > > + > > > + tsens_tz_sensor4 { > > > + polling-delay-passive = <0>; > > > + polling-delay = <0>; > > > + thermal-sensors = <&tsens 4>; > > > + > > > + trips { > > > + cpu-critical { > > > + temperature = <125000>; > > > + hysteresis = <1000>; > > > + type = "critical"; > > > + }; > > > + }; > > > + }; > > > + > > > + tsens_tz_sensor5 { > > > + polling-delay-passive = <0>; > > > + polling-delay = <0>; > > > + thermal-sensors = <&tsens 5>; > > > + > > > + trips { > > > + cpu-critical { > > > + temperature = <125000>; > > > + hysteresis = <1000>; > > > + type = "critical"; > > > + }; > > > + }; > > > + }; > > > + > > > + tsens_tz_sensor6 { > > > + polling-delay-passive = <0>; > > > + polling-delay = <0>; > > > + thermal-sensors = <&tsens 6>; > > > + > > > + trips { > > > + cpu-critical { > > > + temperature = <125000>; > > > + hysteresis = <1000>; > > > + type = "critical"; > > > + }; > > > + }; > > > + }; > > > + > > > + tsens_tz_sensor7 { > > > + polling-delay-passive = <0>; > > > + polling-delay = <0>; > > > + thermal-sensors = <&tsens 7>; > > > + > > > + trips { > > > + cpu-critical { > > > + temperature = <125000>; > > > + hysteresis = <1000>; > > > + type = "critical"; > > > + }; > > > + }; > > > + }; > > > + > > > + tsens_tz_sensor8 { > > > + polling-delay-passive = <0>; > > > + polling-delay = <0>; > > > + thermal-sensors = <&tsens 8>; > > > + > > > + trips { > > > + cpu-critical { > > > + temperature = <125000>; > > > + hysteresis = <1000>; > > > + type = "critical"; > > > + }; > > > + }; > > > + }; > > > + > > > + tsens_tz_sensor9 { > > > + polling-delay-passive = <0>; > > > + polling-delay = <0>; > > > + thermal-sensors = <&tsens 9>; > > > + > > > + trips { > > > + cpu-critical { > > > + temperature = <125000>; > > > + hysteresis = <1000>; > > > + type = "critical"; > > > + }; > > > + }; > > > + }; > > > + > > > + tsens_tz_sensor10 { > > > + polling-delay-passive = <0>; > > > + polling-delay = <0>; > > > + thermal-sensors = <&tsens 10>; > > > + > > > + trips { > > > + cpu-critical { > > > + temperature = <120000>; > > > + hysteresis = <10000>; > > > + type = "critical"; > > > + }; > > > + > > > + cpu-passive { > > > + temperature = <110000>; > > > + hysteresis = <1000>; > > > + type = "passive"; > > > + }; > > > + }; > > > + }; > > > + > > > + tsens_tz_sensor11 { > > > + polling-delay-passive = <0>; > > > + polling-delay = <0>; > > > + thermal-sensors = <&tsens 11>; > > > + > > > + trips { > > > + cpu-critical { > > > + temperature = <120000>; > > > + hysteresis = <10000>; > > > + type = "critical"; > > > + }; > > > + > > > + cpu-passive { > > > + temperature = <110000>; > > > + hysteresis = <1000>; > > > + type = "passive"; > > > + }; > > > + }; > > > + }; > > > + > > > + tsens_tz_sensor12 { > > > + polling-delay-passive = <0>; > > > + polling-delay = <0>; > > > + thermal-sensors = <&tsens 12>; > > > + > > > + trips { > > > + cpu-critical { > > > + temperature = <120000>; > > > + hysteresis = <10000>; > > > + type = "critical"; > > > + }; > > > + > > > + cpu-passive { > > > + temperature = <110000>; > > > + hysteresis = <1000>; > > > + type = "passive"; > > > + }; > > > + }; > > > + }; > > > + > > > + tsens_tz_sensor13 { > > > + polling-delay-passive = <0>; > > > + polling-delay = <0>; > > > + thermal-sensors = <&tsens 13>; > > > + > > > + trips { > > > + cpu-critical { > > > + temperature = <120000>; > > > + hysteresis = <10000>; > > > + type = "critical"; > > > + }; > > > + > > > + cpu-passive { > > > + temperature = <110000>; > > > + hysteresis = <1000>; > > > + type = "passive"; > > > + }; > > > + }; > > > + }; > > > + > > > + tsens_tz_sensor14 { > > > + polling-delay-passive = <0>; > > > + polling-delay = <0>; > > > + thermal-sensors = <&tsens 14>; > > > + > > > + trips { > > > + cpu-critical { > > > + temperature = <125000>; > > > + hysteresis = <1000>; > > > + type = "critical"; > > > + }; > > > + }; > > > + }; > > > + > > > + tsens_tz_sensor15 { > > > + polling-delay-passive = <0>; > > > + polling-delay = <0>; > > > + thermal-sensors = <&tsens 15>; > > > + > > > + trips { > > > + cpu-critical { > > > + temperature = <125000>; > > > + hysteresis = <1000>; > > > + type = "critical"; > > > + }; > > > + }; > > > + }; > > > + }; > > > + > > > timer { > > > compatible = "arm,armv8-timer"; > > > interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, > > > -- > > > 2.7.4 > > > > > > > > > -- > > With best wishes > > Dmitry
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi index 7cd5bdb..a7cb2b4c 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi @@ -947,6 +947,214 @@ }; }; + thermal_zones: thermal-zones { + tsens_tz_sensor3 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 3>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + tsens_tz_sensor4 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 4>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + tsens_tz_sensor5 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 5>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + tsens_tz_sensor6 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 6>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + tsens_tz_sensor7 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 7>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + tsens_tz_sensor8 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 8>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + tsens_tz_sensor9 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 9>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + tsens_tz_sensor10 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 10>; + + trips { + cpu-critical { + temperature = <120000>; + hysteresis = <10000>; + type = "critical"; + }; + + cpu-passive { + temperature = <110000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + tsens_tz_sensor11 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 11>; + + trips { + cpu-critical { + temperature = <120000>; + hysteresis = <10000>; + type = "critical"; + }; + + cpu-passive { + temperature = <110000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + tsens_tz_sensor12 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 12>; + + trips { + cpu-critical { + temperature = <120000>; + hysteresis = <10000>; + type = "critical"; + }; + + cpu-passive { + temperature = <110000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + tsens_tz_sensor13 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 13>; + + trips { + cpu-critical { + temperature = <120000>; + hysteresis = <10000>; + type = "critical"; + }; + + cpu-passive { + temperature = <110000>; + hysteresis = <1000>; + type = "passive"; + }; + }; + }; + + tsens_tz_sensor14 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 14>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + tsens_tz_sensor15 { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&tsens 15>; + + trips { + cpu-critical { + temperature = <125000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,