@@ -29,10 +29,7 @@ struct mdp5_plane {
static int mdp5_plane_mode_set(struct drm_plane *plane,
struct drm_crtc *crtc, struct drm_framebuffer *fb,
- int crtc_x, int crtc_y,
- unsigned int crtc_w, unsigned int crtc_h,
- uint32_t src_x, uint32_t src_y,
- uint32_t src_w, uint32_t src_h);
+ struct drm_rect *src, struct drm_rect *dest);
static void set_scanout_locked(struct drm_plane *plane,
struct drm_framebuffer *fb);
@@ -45,7 +42,7 @@ static struct mdp5_kms *get_kms(struct drm_plane *plane)
static bool plane_enabled(struct drm_plane_state *state)
{
- return state->fb && state->crtc;
+ return state->visible;
}
static void mdp5_plane_destroy(struct drm_plane *plane)
@@ -272,6 +269,7 @@ static void mdp5_plane_cleanup_fb(struct drm_plane *plane,
msm_framebuffer_cleanup(fb, mdp5_kms->id);
}
+#define FRAC_16_16(mult, div) (((mult) << 16) / (div))
static int mdp5_plane_atomic_check(struct drm_plane *plane,
struct drm_plane_state *state)
{
@@ -281,10 +279,19 @@ static int mdp5_plane_atomic_check(struct drm_plane *plane,
bool new_hwpipe = false;
uint32_t max_width, max_height;
uint32_t caps = 0;
+ struct drm_crtc *crtc;
+ struct drm_crtc_state *crtc_state;
+ struct drm_rect clip;
+ int min_scale, max_scale;
+ int ret;
DBG("%s: check (%d -> %d)", plane->name,
plane_enabled(old_state), plane_enabled(state));
+ crtc = state->crtc ? state->crtc : plane->state->crtc;
+ if (!crtc)
+ return 0;
+
max_width = config->hw->lm.max_width << 16;
max_height = config->hw->lm.max_height << 16;
@@ -296,6 +303,22 @@ static int mdp5_plane_atomic_check(struct drm_plane *plane,
return -ERANGE;
}
+ crtc_state = drm_atomic_get_existing_crtc_state(state->state, crtc);
+ if (WARN_ON(!crtc_state))
+ return -EINVAL;
+
+ clip.x1 = 0;
+ clip.y1 = 0;
+ clip.x2 = crtc_state->adjusted_mode.hdisplay;
+ clip.y2 = crtc_state->adjusted_mode.vdisplay;
+ min_scale = FRAC_16_16(1, 8);
+ max_scale = FRAC_16_16(8, 1);
+
+ ret = drm_plane_helper_check_state(state, &clip, min_scale,
+ max_scale, true, true);
+ if (ret)
+ return ret;
+
if (plane_enabled(state)) {
unsigned int rotation;
const struct mdp_format *format;
@@ -368,10 +391,7 @@ static void mdp5_plane_atomic_update(struct drm_plane *plane,
ret = mdp5_plane_mode_set(plane,
state->crtc, state->fb,
- state->crtc_x, state->crtc_y,
- state->crtc_w, state->crtc_h,
- state->src_x, state->src_y,
- state->src_w, state->src_h);
+ &state->src, &state->dst);
/* atomic_check should have ensured that this doesn't fail */
WARN_ON(ret < 0);
}
@@ -664,10 +684,7 @@ static void mdp5_write_pixel_ext(struct mdp5_kms *mdp5_kms, enum mdp5_pipe pipe,
static int mdp5_plane_mode_set(struct drm_plane *plane,
struct drm_crtc *crtc, struct drm_framebuffer *fb,
- int crtc_x, int crtc_y,
- unsigned int crtc_w, unsigned int crtc_h,
- uint32_t src_x, uint32_t src_y,
- uint32_t src_w, uint32_t src_h)
+ struct drm_rect *src, struct drm_rect *dest)
{
struct drm_plane_state *pstate = plane->state;
struct mdp5_hw_pipe *hwpipe = to_mdp5_plane_state(pstate)->hwpipe;
@@ -683,6 +700,10 @@ static int mdp5_plane_mode_set(struct drm_plane *plane,
uint32_t pix_format;
unsigned int rotation;
bool vflip, hflip;
+ int crtc_x, crtc_y;
+ unsigned int crtc_w, crtc_h;
+ uint32_t src_x, src_y;
+ uint32_t src_w, src_h;
unsigned long flags;
int ret;
@@ -695,6 +716,16 @@ static int mdp5_plane_mode_set(struct drm_plane *plane,
format = to_mdp_format(msm_framebuffer_format(fb));
pix_format = format->base.pixel_format;
+ src_x = src->x1;
+ src_y = src->y1;
+ src_w = drm_rect_width(src);
+ src_h = drm_rect_height(src);
+
+ crtc_x = dest->x1;
+ crtc_y = dest->y1;
+ crtc_w = drm_rect_width(dest);
+ crtc_h = drm_rect_height(dest);
+
/* src values are in Q16 fixed point, convert to integer: */
src_x = src_x >> 16;
src_y = src_y >> 16;
@@ -151,20 +151,29 @@ static void commit_worker(struct work_struct *work)
complete_commit(container_of(work, struct msm_commit, work), true);
}
+/*
+ * this func is identical to the drm_atomic_helper_check, but we keep this
+ * because we might eventually need to have a more finegrained check
+ * sequence without using the atomic helpers.
+ *
+ * In the past, we first called drm_atomic_helper_check_planes, and then
+ * drm_atomic_helper_check_modeset. We needed this because the MDP5 plane's
+ * ->atomic_check could update ->mode_changed for pixel format changes.
+ * This, however isn't needed now because if there is a pixel format change,
+ * we just assign a new hwpipe for it with a new SMP allocation. We might
+ * eventually hit a condition where we would need to do a full modeset if
+ * we run out of planes. There, we'd probably need to set mode_changed.
+ */
int msm_atomic_check(struct drm_device *dev,
struct drm_atomic_state *state)
{
int ret;
- /*
- * msm ->atomic_check can update ->mode_changed for pixel format
- * changes, hence must be run before we check the modeset changes.
- */
- ret = drm_atomic_helper_check_planes(dev, state);
+ ret = drm_atomic_helper_check_modeset(dev, state);
if (ret)
return ret;
- ret = drm_atomic_helper_check_modeset(dev, state);
+ ret = drm_atomic_helper_check_planes(dev, state);
if (ret)
return ret;
The MDP5 plane's atomic_check ops doesn't perform clipping tests. This didn't hurt us much in the past, but clipping becomes important with cursor planes. Use drm_plane_helper_check_state, the way rockchip/intel/mtk drivers already do. Use these drivers as reference. Clipping requires knowledge of the crtc width and height. This requires us to call drm_atomic_helper_check_modeset before drm_atomic_helper_check_planes in the driver's atomic_check op, because check_modetest will populate the mode for the crtc, needed to populate the clip rectangle. We update the plane_enabled(state) local helper to use state->visible, since state->visible and 'state->fb && state->crtc' represent the same thing. One issue with the existing code is that we don't have a way to disable the plane when it's completely clipped out. Until there isn't an update on the crtc (which would de-stage the plane), we would still see the plane in its last 'visible' configuration. Signed-off-by: Archit Taneja <architt@codeaurora.org> --- drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c | 57 ++++++++++++++++++++++++------- drivers/gpu/drm/msm/msm_atomic.c | 21 ++++++++---- 2 files changed, 59 insertions(+), 19 deletions(-)