@@ -177,6 +177,21 @@ static void mdp5_crtc_destroy(struct drm_crtc *crtc)
kfree(mdp5_crtc);
}
+static inline u32 mdp5_lm_use_fg_alpha_mask(enum mdp_mixer_stage_id stage)
+{
+ switch (stage) {
+ case STAGE0: return MDP5_LM_BLEND_COLOR_OUT_STAGE0_FG_ALPHA;
+ case STAGE1: return MDP5_LM_BLEND_COLOR_OUT_STAGE1_FG_ALPHA;
+ case STAGE2: return MDP5_LM_BLEND_COLOR_OUT_STAGE2_FG_ALPHA;
+ case STAGE3: return MDP5_LM_BLEND_COLOR_OUT_STAGE3_FG_ALPHA;
+ case STAGE4: return MDP5_LM_BLEND_COLOR_OUT_STAGE4_FG_ALPHA;
+ case STAGE5: return MDP5_LM_BLEND_COLOR_OUT_STAGE5_FG_ALPHA;
+ case STAGE6: return MDP5_LM_BLEND_COLOR_OUT_STAGE6_FG_ALPHA;
+ default:
+ return 0;
+ }
+}
+
/*
* blend_setup() - blend all the planes of a CRTC
*
@@ -197,6 +212,8 @@ static void blend_setup(struct drm_crtc *crtc)
unsigned long flags;
enum mdp5_pipe stage[STAGE_MAX + 1] = { SSPP_NONE };
int i, plane_cnt = 0;
+ bool bg_alpha_enabled = false;
+ u32 mixer_op_mode = 0;
#define blender(stage) ((stage) - STAGE0)
hw_cfg = mdp5_cfg_get_hw_config(mdp5_kms->cfg);
@@ -218,6 +235,11 @@ static void blend_setup(struct drm_crtc *crtc)
if (!pstates[STAGE_BASE]) {
ctl_blend_flags |= MDP5_CTL_BLEND_OP_FLAG_BORDER_OUT;
DBG("Border Color is enabled");
+ } else if (plane_cnt) {
+ format = to_mdp_format(msm_framebuffer_format(pstates[STAGE_BASE]->base.fb));
+
+ if (format->alpha_enable)
+ bg_alpha_enabled = true;
}
/* The reset for blending */
@@ -232,6 +254,12 @@ static void blend_setup(struct drm_crtc *crtc)
MDP5_LM_BLEND_OP_MODE_BG_ALPHA(BG_CONST);
fg_alpha = pstates[i]->alpha;
bg_alpha = 0xFF - pstates[i]->alpha;
+
+ if (!format->alpha_enable && bg_alpha_enabled)
+ mixer_op_mode = 0;
+ else
+ mixer_op_mode |= mdp5_lm_use_fg_alpha_mask(i);
+
DBG("Stage %d fg_alpha %x bg_alpha %x", i, fg_alpha, bg_alpha);
if (format->alpha_enable && pstates[i]->premultiplied) {
@@ -268,6 +296,8 @@ static void blend_setup(struct drm_crtc *crtc)
blender(i)), bg_alpha);
}
+ mdp5_write(mdp5_kms, REG_MDP5_LM_BLEND_COLOR_OUT(lm), mixer_op_mode);
+
mdp5_ctl_blend(mdp5_crtc->ctl, stage, plane_cnt, ctl_blend_flags);
out:
In MDP5 Layer Mixer HW, the blender output is only the blended color components (i.e R, G and B, or COLOR0/1/2 in MDP5 HW terminology). This is fed to the BG input of the next blender. We also need to provide an alpha (COLOR3) value for the BG input at the next stage. This is configured via using the REG_MDP5_LM_BLEND_COLOR_OUT register. For each stage, we can propagate either the BG or FG alpha to the next stage. The approach taken by the driver is to propagate FG alpha, if the plane staged on that blender has an alpha. If it doesn't, we try to propagate the base layer's alpha. This is borrowed from downstream MDP5 kernel driver. Without this, we don't see any cursor plane content. Signed-off-by: Archit Taneja <architt@codeaurora.org> --- drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+)