From patchwork Wed Jan 25 22:32:44 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Stephen Boyd X-Patchwork-Id: 9538059 X-Patchwork-Delegate: agross@codeaurora.org Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id 59EA9601D7 for ; Wed, 25 Jan 2017 22:32:53 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 4D00B27F17 for ; Wed, 25 Jan 2017 22:32:53 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 417C527F8F; Wed, 25 Jan 2017 22:32:53 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.8 required=2.0 tests=BAYES_00,DKIM_SIGNED, RCVD_IN_DNSWL_HI,T_DKIM_INVALID autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 77A4B27F17 for ; Wed, 25 Jan 2017 22:32:52 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752276AbdAYWcv (ORCPT ); Wed, 25 Jan 2017 17:32:51 -0500 Received: from mail-pf0-f171.google.com ([209.85.192.171]:35261 "EHLO mail-pf0-f171.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752291AbdAYWcu (ORCPT ); Wed, 25 Jan 2017 17:32:50 -0500 Received: by mail-pf0-f171.google.com with SMTP id f144so61105074pfa.2 for ; Wed, 25 Jan 2017 14:32:50 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=2XTC1yP3ca9n2GwWqUHKQe8nj3q+Zk2AamHGXLXW1mg=; b=JCbupzqtwOQV7wdJG1QlBUjpb4zf4AKv1EWIt53rP8xXPcBj/Tp9pz9m6fMShfo+5y IXZlF8wKOXkipcbR4QtuMSEjeDgN1GUCHmcOOjSCSNYcdqKiSty2IXX1W36HZs7a6OU9 EAsK9CX4ySl/dIjTNquQ37sgdDIZRc1Ii2o+4= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=2XTC1yP3ca9n2GwWqUHKQe8nj3q+Zk2AamHGXLXW1mg=; b=Pdldu0E/BQHJNObWYaAkRBhPvJYmnIPXC0qVAijM5kqonZeKmLVaJGgY/N73HWn5C1 yj+je0mFD8ezxW0N/SYCfSGslaXsdYA3/cwsJDXWE+onIpYXKwDlo/Q/lYApTk0LvnrM YDy1SMmA5QNF+5KAMBMbqurJLw82HeB8tdYOviAC41OorDXQH3iQgRwL8hgiWvKlLcKF 2llzFfhE0AV+bqDcQ36PHC1AjBp9vrI6GRt6f0S8LZzTQ+Dl6CypfkhM8q4UQmzDxcVQ 3rmX52fj7qqqU+sAR4HBnxUNPsKpwGHgfjGWtCV1A5wsZ7IDnCDfqd8vHwqjxTEHeuKm OhqQ== X-Gm-Message-State: AIkVDXKKSl74hb0eic0yy86XgEz4PNDxZiP8lGXYlhA6kHSZWdEHyGRPBbdRNcH79mKExhem X-Received: by 10.99.101.193 with SMTP id z184mr1730946pgb.216.1485383569583; Wed, 25 Jan 2017 14:32:49 -0800 (PST) Received: from localhost.localdomain (i-global254.qualcomm.com. [199.106.103.254]) by smtp.gmail.com with ESMTPSA id k78sm3411637pfb.93.2017.01.25.14.32.48 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Wed, 25 Jan 2017 14:32:48 -0800 (PST) From: Stephen Boyd To: Kishon Vijay Abraham I Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org, Andy Gross , Bjorn Andersson , Neil Armstrong , Arnd Bergmann , Felipe Balbi , Peter Chen , devicetree@vger.kernel.org Subject: [PATCH v8 2/3] phy: Add support for Qualcomm's USB HSIC phy Date: Wed, 25 Jan 2017 14:32:44 -0800 Message-Id: <20170125223245.2688-3-stephen.boyd@linaro.org> X-Mailer: git-send-email 2.10.0.297.gf6727b0 In-Reply-To: <20170125223245.2688-1-stephen.boyd@linaro.org> References: <20170125223245.2688-1-stephen.boyd@linaro.org> Sender: linux-arm-msm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP The HSIC USB controller on qcom SoCs has an integrated all digital phy controlled via the ULPI viewport. Cc: Kishon Vijay Abraham I Acked-by: Rob Herring Cc: Signed-off-by: Stephen Boyd --- .../devicetree/bindings/phy/qcom,usb-hsic-phy.txt | 65 +++++++++ drivers/phy/Kconfig | 7 + drivers/phy/Makefile | 1 + drivers/phy/phy-qcom-usb-hsic.c | 160 +++++++++++++++++++++ 4 files changed, 233 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.txt create mode 100644 drivers/phy/phy-qcom-usb-hsic.c diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.txt b/Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.txt new file mode 100644 index 000000000000..3c7cb2be4b12 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.txt @@ -0,0 +1,65 @@ +Qualcomm's USB HSIC PHY + +PROPERTIES + +- compatible: + Usage: required + Value type: + Definition: Should contain "qcom,usb-hsic-phy" and more specifically one of the + following: + + "qcom,usb-hsic-phy-mdm9615" + "qcom,usb-hsic-phy-msm8974" + +- #phy-cells: + Usage: required + Value type: + Definition: Should contain 0 + +- clocks: + Usage: required + Value type: + Definition: Should contain clock specifier for phy, calibration and + a calibration sleep clock + +- clock-names: + Usage: required + Value type: + Definition: Should contain "phy, "cal" and "cal_sleep" + +- pinctrl-names: + Usage: required + Value type: + Definition: Should contain "init" and "default" in that order + +- pinctrl-0: + Usage: required + Value type: + Definition: List of pinctrl settings to apply to keep HSIC pins in a glitch + free state + +- pinctrl-1: + Usage: required + Value type: + Definition: List of pinctrl settings to apply to mux out the HSIC pins + +EXAMPLE + +usb-controller { + ulpi { + phy { + compatible = "qcom,usb-hsic-phy-msm8974", + "qcom,usb-hsic-phy"; + #phy-cells = <0>; + pinctrl-names = "init", "default"; + pinctrl-0 = <&hsic_sleep>; + pinctrl-1 = <&hsic_default>; + clocks = <&gcc GCC_USB_HSIC_CLK>, + <&gcc GCC_USB_HSIC_IO_CAL_CLK>, + <&gcc GCC_USB_HSIC_IO_CAL_SLEEP_CLK>; + clock-names = "phy", "cal", "cal_sleep"; + assigned-clocks = <&gcc GCC_USB_HSIC_IO_CAL_CLK>; + assigned-clock-rates = <960000>; + }; + }; +}; diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index e8eb7f225a88..a430a64981d5 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -437,6 +437,13 @@ config PHY_QCOM_UFS help Support for UFS PHY on QCOM chipsets. +config PHY_QCOM_USB_HSIC + tristate "Qualcomm USB HSIC ULPI PHY module" + depends on USB_ULPI_BUS + select GENERIC_PHY + help + Support for the USB HSIC ULPI compliant PHY on QCOM chipsets. + config PHY_TUSB1210 tristate "TI TUSB1210 ULPI PHY module" depends on USB_ULPI_BUS diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index 65eb2f436a41..c43c9df5d301 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -52,6 +52,7 @@ obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o +obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o diff --git a/drivers/phy/phy-qcom-usb-hsic.c b/drivers/phy/phy-qcom-usb-hsic.c new file mode 100644 index 000000000000..47690f9945b9 --- /dev/null +++ b/drivers/phy/phy-qcom-usb-hsic.c @@ -0,0 +1,160 @@ +/** + * Copyright (C) 2016 Linaro Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include + +#include "ulpi_phy.h" + +#define ULPI_HSIC_CFG 0x30 +#define ULPI_HSIC_IO_CAL 0x33 + +struct qcom_usb_hsic_phy { + struct ulpi *ulpi; + struct phy *phy; + struct pinctrl *pctl; + struct clk *phy_clk; + struct clk *cal_clk; + struct clk *cal_sleep_clk; +}; + +static int qcom_usb_hsic_phy_power_on(struct phy *phy) +{ + struct qcom_usb_hsic_phy *uphy = phy_get_drvdata(phy); + struct ulpi *ulpi = uphy->ulpi; + struct pinctrl_state *pins_default; + int ret; + + ret = clk_prepare_enable(uphy->phy_clk); + if (ret) + return ret; + + ret = clk_prepare_enable(uphy->cal_clk); + if (ret) + goto err_cal; + + ret = clk_prepare_enable(uphy->cal_sleep_clk); + if (ret) + goto err_sleep; + + /* Set periodic calibration interval to ~2.048sec in HSIC_IO_CAL_REG */ + ret = ulpi_write(ulpi, ULPI_HSIC_IO_CAL, 0xff); + if (ret) + goto err_ulpi; + + /* Enable periodic IO calibration in HSIC_CFG register */ + ret = ulpi_write(ulpi, ULPI_HSIC_CFG, 0xa8); + if (ret) + goto err_ulpi; + + /* Configure pins for HSIC functionality */ + pins_default = pinctrl_lookup_state(uphy->pctl, PINCTRL_STATE_DEFAULT); + if (IS_ERR(pins_default)) + return PTR_ERR(pins_default); + + ret = pinctrl_select_state(uphy->pctl, pins_default); + if (ret) + goto err_ulpi; + + /* Enable HSIC mode in HSIC_CFG register */ + ret = ulpi_write(ulpi, ULPI_SET(ULPI_HSIC_CFG), 0x01); + if (ret) + goto err_ulpi; + + /* Disable auto-resume */ + ret = ulpi_write(ulpi, ULPI_CLR(ULPI_IFC_CTRL), + ULPI_IFC_CTRL_AUTORESUME); + if (ret) + goto err_ulpi; + + return ret; +err_ulpi: + clk_disable_unprepare(uphy->cal_sleep_clk); +err_sleep: + clk_disable_unprepare(uphy->cal_clk); +err_cal: + clk_disable_unprepare(uphy->phy_clk); + return ret; +} + +static int qcom_usb_hsic_phy_power_off(struct phy *phy) +{ + struct qcom_usb_hsic_phy *uphy = phy_get_drvdata(phy); + + clk_disable_unprepare(uphy->cal_sleep_clk); + clk_disable_unprepare(uphy->cal_clk); + clk_disable_unprepare(uphy->phy_clk); + + return 0; +} + +static const struct phy_ops qcom_usb_hsic_phy_ops = { + .power_on = qcom_usb_hsic_phy_power_on, + .power_off = qcom_usb_hsic_phy_power_off, + .owner = THIS_MODULE, +}; + +static int qcom_usb_hsic_phy_probe(struct ulpi *ulpi) +{ + struct qcom_usb_hsic_phy *uphy; + struct phy_provider *p; + struct clk *clk; + + uphy = devm_kzalloc(&ulpi->dev, sizeof(*uphy), GFP_KERNEL); + if (!uphy) + return -ENOMEM; + ulpi_set_drvdata(ulpi, uphy); + + uphy->ulpi = ulpi; + uphy->pctl = devm_pinctrl_get(&ulpi->dev); + if (IS_ERR(uphy->pctl)) + return PTR_ERR(uphy->pctl); + + uphy->phy_clk = clk = devm_clk_get(&ulpi->dev, "phy"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + uphy->cal_clk = clk = devm_clk_get(&ulpi->dev, "cal"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + uphy->cal_sleep_clk = clk = devm_clk_get(&ulpi->dev, "cal_sleep"); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + uphy->phy = devm_phy_create(&ulpi->dev, ulpi->dev.of_node, + &qcom_usb_hsic_phy_ops); + if (IS_ERR(uphy->phy)) + return PTR_ERR(uphy->phy); + phy_set_drvdata(uphy->phy, uphy); + + p = devm_of_phy_provider_register(&ulpi->dev, of_phy_simple_xlate); + return PTR_ERR_OR_ZERO(p); +} + +static const struct of_device_id qcom_usb_hsic_phy_match[] = { + { .compatible = "qcom,usb-hsic-phy", }, + { } +}; +MODULE_DEVICE_TABLE(of, qcom_usb_hsic_phy_match); + +static struct ulpi_driver qcom_usb_hsic_phy_driver = { + .probe = qcom_usb_hsic_phy_probe, + .driver = { + .name = "qcom_usb_hsic_phy", + .of_match_table = qcom_usb_hsic_phy_match, + }, +}; +module_ulpi_driver(qcom_usb_hsic_phy_driver); + +MODULE_DESCRIPTION("Qualcomm USB HSIC phy"); +MODULE_LICENSE("GPL v2");