| Message ID | 20180222061208.2031-5-rnayak@codeaurora.org (mailing list archive) |
|---|---|
| State | Deferred, archived |
| Delegated to: | Andy Gross |
| Headers | show |
On Wed 21 Feb 22:12 PST 2018, Rajendra Nayak wrote: > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi [..] > + qup_uart2: serial@a84000 { > + compatible = "qcom,geni-debug-uart"; > + reg = <0xa84000 0x4000>; > + reg-names = "se-phys"; > + clock-names = "se-clk"; This was changed to "se" in v3 of the GENI patchset, with that this boots nicely again. Regards, Bjorn -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 03/05/2018 01:29 AM, Bjorn Andersson wrote: > On Wed 21 Feb 22:12 PST 2018, Rajendra Nayak wrote: >> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > [..] >> + qup_uart2: serial@a84000 { >> + compatible = "qcom,geni-debug-uart"; >> + reg = <0xa84000 0x4000>; >> + reg-names = "se-phys"; >> + clock-names = "se-clk"; > > This was changed to "se" in v3 of the GENI patchset, with that this > boots nicely again. Thanks Bjorn for testing. Karthik, it would be good if you could include just this patch from this series as part of your GENI series for the next (and subsequent) repost, with updates as needed based on binding changes?
On 3/5/2018 3:43 AM, Rajendra Nayak wrote: > > > On 03/05/2018 01:29 AM, Bjorn Andersson wrote: >> On Wed 21 Feb 22:12 PST 2018, Rajendra Nayak wrote: >>> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi >> [..] >>> + qup_uart2: serial@a84000 { >>> + compatible = "qcom,geni-debug-uart"; >>> + reg = <0xa84000 0x4000>; >>> + reg-names = "se-phys"; >>> + clock-names = "se-clk"; >> >> This was changed to "se" in v3 of the GENI patchset, with that this >> boots nicely again. > > Thanks Bjorn for testing. > > Karthik, it would be good if you could include just this patch from this series as part > of your GENI series for the next (and subsequent) repost, with updates as needed based on > binding changes? > I will include this patch in my next submission. Regards, Karthik.
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 979ab49913f1..2a1ed55b703e 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -12,4 +12,43 @@ / { model = "Qualcomm Technologies, Inc. SDM845 MTP"; compatible = "qcom,sdm845-mtp"; + + aliases { + serial0 = &qup_uart2; + }; + + chosen { + stdout-path = "serial0"; + }; +}; + +&soc { + geni-se@ac0000 { + serial@a84000 { + status = "okay"; + }; + }; + + pinctrl@3400000 { + qup-uart2-default { + pinconf_tx { + pins = "gpio4"; + drive-strength = <2>; + bias-disable; + }; + + pinconf_rx { + pins = "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + qup-uart2-sleep { + pinconf { + pins = "gpio4", "gpio5"; + bias-pull-down; + }; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index da3d6ac906c8..0acd6c51115d 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -6,6 +6,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/clock/qcom,gcc-sdm845.h> / { interrupt-parent = <&intc>; @@ -195,6 +196,20 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + + qup_uart2_default: qup-uart2-default { + pinmux { + function = "qup9"; + pins = "gpio4", "gpio5"; + }; + }; + + qup_uart2_sleep: qup-uart2-sleep { + pinmux { + function = "gpio"; + pins = "gpio4", "gpio5"; + }; + }; }; timer@17c90000 { @@ -273,5 +288,29 @@ #interrupt-cells = <4>; cell-index = <0>; }; + + geni-se@ac0000 { + compatible = "qcom,geni-se-qup"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + reg = <0xac0000 0x6000>; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + + qup_uart2: serial@a84000 { + compatible = "qcom,geni-debug-uart"; + reg = <0xa84000 0x4000>; + reg-names = "se-phys"; + clock-names = "se-clk"; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qup_uart2_default>; + pinctrl-1 = <&qup_uart2_sleep>; + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + }; }; };
Add the qup uart node and geni se instance needed to support the serial console on the MTP. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> --- arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 39 +++++++++++++++++++++++++++++++++ arch/arm64/boot/dts/qcom/sdm845.dtsi | 39 +++++++++++++++++++++++++++++++++ 2 files changed, 78 insertions(+)