diff mbox

[v2,2/3] dt-bindings: net: bluetooth: Add qualcomm-bluetooth

Message ID 20180313164444.19881-3-thierry.escande@linaro.org (mailing list archive)
State Superseded, archived
Headers show

Commit Message

Thierry Escande March 13, 2018, 4:44 p.m. UTC
Add binding document for serial bluetooth chips using Qualcomm protocol.

Signed-off-by: Thierry Escande <thierry.escande@linaro.org>
---
 .../devicetree/bindings/net/qualcomm-bluetooth.txt | 34 ++++++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt

Comments

Bjorn Andersson March 13, 2018, 5:25 p.m. UTC | #1
On Tue 13 Mar 09:44 PDT 2018, Thierry Escande wrote:

> Add binding document for serial bluetooth chips using Qualcomm protocol.
> 
> Signed-off-by: Thierry Escande <thierry.escande@linaro.org>

Looks good, just two minor things.

[..]
> +Required properties:
> +
> + - compatible: should contain one of the following:
> +   * "qcom,qca6174-bt"
> +

You're missing the "susclk" clock.

> +Optional properties:
> +
> + - bt-disable-n-gpios: GPIO specifier, used to enable chip during probe

Is this really optional?

Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
new file mode 100644
index 000000000000..288cf062e906
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
@@ -0,0 +1,34 @@ 
+Qualcomm Bluetooth Chips
+---------------------
+
+This documents the binding structure and common properties for serial
+attached Qualcomm devices.
+
+Serial attached Qualcomm devices shall be a child node of the host UART
+device the slave device is attached to.
+
+Required properties:
+
+ - compatible: should contain one of the following:
+   * "qcom,qca6174-bt"
+
+Optional properties:
+
+ - bt-disable-n-gpios: GPIO specifier, used to enable chip during probe
+
+Example:
+
+serial@7570000 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp1_uart1_default>;
+	pinctrl-1 = <&blsp1_uart1_sleep>;
+
+	bluetooth {
+		compatible = "qcom,qca6174-bt";
+
+		bt-disable-n-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_en_pin_a>, <&divclk4_pin_a>;
+	};
+};