diff mbox

arm64: dts: msm8996: fix gic_irq_domain_translate warnings

Message ID 20180427061028.13192-1-thierry.escande@linaro.org (mailing list archive)
State Accepted, archived
Delegated to: Andy Gross
Headers show

Commit Message

Thierry Escande April 27, 2018, 6:10 a.m. UTC 
Remove the usage of IRQ_TYPE_NONE to fix loud warnings from
patch (83a86fbb5b56b "irqchip/gic: Loudly complain about
the use of IRQ_TYPE_NONE").

Signed-off-by: Thierry Escande <thierry.escande@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

Comments

Amit Kucheria May 10, 2018, 8:16 a.m. UTC | #1 
On Fri, Apr 27, 2018 at 9:10 AM, Thierry Escande
<thierry.escande@linaro.org> wrote:
> Remove the usage of IRQ_TYPE_NONE to fix loud warnings from
> patch (83a86fbb5b56b "irqchip/gic: Loudly complain about
> the use of IRQ_TYPE_NONE").
>
> Signed-off-by: Thierry Escande <thierry.escande@linaro.org>

Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>

(boot report here:
https://storage.kernelci.org/qcom-lt/integration-linux-qcomlt/v4.17-rc4-247-gbe94bee41bf6/arm64/defconfig/lab-bjorn/boot-apq8096-db820c.txt)

> ---
>  arch/arm64/boot/dts/qcom/msm8996.dtsi | 19 ++++++++++---------
>  1 file changed, 10 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> index 410ae787ebb4..1aaf1fa2604e 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> @@ -437,7 +437,7 @@
>                 blsp2_i2c0: i2c@75b5000 {
>                         compatible = "qcom,i2c-qup-v2.2.1";
>                         reg = <0x075b5000 0x1000>;
> -                       interrupts = <GIC_SPI 101 0>;
> +                       interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
>                         clocks = <&gcc GCC_BLSP2_AHB_CLK>,
>                                 <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
>                         clock-names = "iface", "core";
> @@ -468,7 +468,7 @@
>                 blsp2_i2c1: i2c@75b6000 {
>                         compatible = "qcom,i2c-qup-v2.2.1";
>                         reg = <0x075b6000 0x1000>;
> -                       interrupts = <GIC_SPI 102 0>;
> +                       interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
>                         clocks = <&gcc GCC_BLSP2_AHB_CLK>,
>                                 <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>;
>                         clock-names = "iface", "core";
> @@ -493,7 +493,7 @@
>                 blsp1_i2c2: i2c@7577000 {
>                         compatible = "qcom,i2c-qup-v2.2.1";
>                         reg = <0x07577000 0x1000>;
> -                       interrupts = <GIC_SPI 97 0>;
> +                       interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
>                         clocks = <&gcc GCC_BLSP1_AHB_CLK>,
>                                 <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
>                         clock-names = "iface", "core";
> @@ -526,7 +526,8 @@
>                          reg = <0x74a4900 0x314>, <0x74a4000 0x800>;
>                          reg-names = "hc_mem", "core_mem";
>
> -                        interrupts = <0 125 0>, <0 221 0>;
> +                        interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>,
> +                                     <0 221 IRQ_TYPE_LEVEL_HIGH>;
>                          interrupt-names = "hc_irq", "pwr_irq";
>
>                          clock-names = "iface", "core", "xo";
> @@ -809,7 +810,7 @@
>                         dwc3@7600000 {
>                                 compatible = "snps,dwc3";
>                                 reg = <0x7600000 0xcc00>;
> -                               interrupts = <0 138 0>;
> +                               interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
>                                 phys = <&hsusb_phy2>;
>                                 phy-names = "usb2-phy";
>                         };
> @@ -838,7 +839,7 @@
>                         dwc3@6a00000 {
>                                 compatible = "snps,dwc3";
>                                 reg = <0x6a00000 0xcc00>;
> -                               interrupts = <0 131 0>;
> +                               interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
>                                 phys = <&hsusb_phy1>, <&ssusb_phy_0>;
>                                 phy-names = "usb2-phy", "usb3-phy";
>                         };
> @@ -872,7 +873,7 @@
>                                 ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>,
>                                         <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
>
> -                               interrupts = <GIC_SPI 405 IRQ_TYPE_NONE>;
> +                               interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
>                                 interrupt-names = "msi";
>                                 #interrupt-cells = <1>;
>                                 interrupt-map-mask = <0 0 0 0x7>;
> @@ -927,7 +928,7 @@
>                                 ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>,
>                                         <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
>
> -                               interrupts = <GIC_SPI 413 IRQ_TYPE_NONE>;
> +                               interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
>                                 interrupt-names = "msi";
>                                 #interrupt-cells = <1>;
>                                 interrupt-map-mask = <0 0 0 0x7>;
> @@ -980,7 +981,7 @@
>
>                                 device_type = "pci";
>
> -                               interrupts = <GIC_SPI 421 IRQ_TYPE_NONE>;
> +                               interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
>                                 interrupt-names = "msi";
>                                 #interrupt-cells = <1>;
>                                 interrupt-map-mask = <0 0 0 0x7>;
> --
> 2.14.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 410ae787ebb4..1aaf1fa2604e 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -437,7 +437,7 @@ 
 		blsp2_i2c0: i2c@75b5000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x075b5000 0x1000>;
-			interrupts = <GIC_SPI 101 0>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
 				<&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
 			clock-names = "iface", "core";
@@ -468,7 +468,7 @@ 
 		blsp2_i2c1: i2c@75b6000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x075b6000 0x1000>;
-			interrupts = <GIC_SPI 102 0>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP2_AHB_CLK>,
 				<&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>;
 			clock-names = "iface", "core";
@@ -493,7 +493,7 @@ 
 		blsp1_i2c2: i2c@7577000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x07577000 0x1000>;
-			interrupts = <GIC_SPI 97 0>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
 				<&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
 			clock-names = "iface", "core";
@@ -526,7 +526,8 @@ 
 			 reg = <0x74a4900 0x314>, <0x74a4000 0x800>;
 			 reg-names = "hc_mem", "core_mem";
 
-			 interrupts = <0 125 0>, <0 221 0>;
+			 interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>,
+				      <0 221 IRQ_TYPE_LEVEL_HIGH>;
 			 interrupt-names = "hc_irq", "pwr_irq";
 
 			 clock-names = "iface", "core", "xo";
@@ -809,7 +810,7 @@ 
 			dwc3@7600000 {
 				compatible = "snps,dwc3";
 				reg = <0x7600000 0xcc00>;
-				interrupts = <0 138 0>;
+				interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&hsusb_phy2>;
 				phy-names = "usb2-phy";
 			};
@@ -838,7 +839,7 @@ 
 			dwc3@6a00000 {
 				compatible = "snps,dwc3";
 				reg = <0x6a00000 0xcc00>;
-				interrupts = <0 131 0>;
+				interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&hsusb_phy1>, <&ssusb_phy_0>;
 				phy-names = "usb2-phy", "usb3-phy";
 			};
@@ -872,7 +873,7 @@ 
 				ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>,
 					<0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
 
-				interrupts = <GIC_SPI 405 IRQ_TYPE_NONE>;
+				interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "msi";
 				#interrupt-cells = <1>;
 				interrupt-map-mask = <0 0 0 0x7>;
@@ -927,7 +928,7 @@ 
 				ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>,
 					<0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
 
-				interrupts = <GIC_SPI 413 IRQ_TYPE_NONE>;
+				interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "msi";
 				#interrupt-cells = <1>;
 				interrupt-map-mask = <0 0 0 0x7>;
@@ -980,7 +981,7 @@ 
 
 				device_type = "pci";
 
-				interrupts = <GIC_SPI 421 IRQ_TYPE_NONE>;
+				interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
 				interrupt-names = "msi";
 				#interrupt-cells = <1>;
 				interrupt-map-mask = <0 0 0 0x7>;