| Message ID | 20180602193211.25731-1-bjorn.andersson@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Sat 02 Jun 12:32 PDT 2018, Bjorn Andersson wrote: > For platforms that has multiple copies of the TSENS hardware block it's > convenient to specify the number of sensors per block in DeviceTree. > > Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> > Reviewed-by: Rob Herring <robh@kernel.org> [binding] > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Please ignore, after sending this I saw that Eduardo picked up v1 yesterday. Thanks Eduardo, Bjorn > --- > > Changes since v1: > - Added comment as suggested by Amit > - Picked up Amit and Rob's R-b > > .../devicetree/bindings/thermal/qcom-tsens.txt | 1 + > drivers/thermal/qcom/tsens.c | 13 ++++++++++--- > 2 files changed, 11 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt > index 292ed89d900b..06195e8f35e2 100644 > --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt > +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt > @@ -8,6 +8,7 @@ Required properties: > > - reg: Address range of the thermal registers > - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description. > +- #qcom,sensors: Number of sensors in tsens block > - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify > nvmem cells > > diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c > index 3f9fe6aa51cc..b212bebcfc36 100644 > --- a/drivers/thermal/qcom/tsens.c > +++ b/drivers/thermal/qcom/tsens.c > @@ -116,6 +116,7 @@ static int tsens_probe(struct platform_device *pdev) > struct tsens_device *tmdev; > const struct tsens_data *data; > const struct of_device_id *id; > + u32 num_sensors; > > if (pdev->dev.of_node) > dev = &pdev->dev; > @@ -130,18 +131,24 @@ static int tsens_probe(struct platform_device *pdev) > else > data = &data_8960; > > - if (data->num_sensors <= 0) { > + num_sensors = data->num_sensors; > + > + /* Override driver provided num_sensors, if specified in DT */ > + if (np) > + of_property_read_u32(np, "#qcom,sensors", &num_sensors); > + > + if (num_sensors <= 0) { > dev_err(dev, "invalid number of sensors\n"); > return -EINVAL; > } > > tmdev = devm_kzalloc(dev, sizeof(*tmdev) + > - data->num_sensors * sizeof(*s), GFP_KERNEL); > + num_sensors * sizeof(*s), GFP_KERNEL); > if (!tmdev) > return -ENOMEM; > > tmdev->dev = dev; > - tmdev->num_sensors = data->num_sensors; > + tmdev->num_sensors = num_sensors; > tmdev->ops = data->ops; > for (i = 0; i < tmdev->num_sensors; i++) { > if (data->hw_ids) > -- > 2.17.0 > -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt index 292ed89d900b..06195e8f35e2 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt @@ -8,6 +8,7 @@ Required properties: - reg: Address range of the thermal registers - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description. +- #qcom,sensors: Number of sensors in tsens block - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify nvmem cells diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c index 3f9fe6aa51cc..b212bebcfc36 100644 --- a/drivers/thermal/qcom/tsens.c +++ b/drivers/thermal/qcom/tsens.c @@ -116,6 +116,7 @@ static int tsens_probe(struct platform_device *pdev) struct tsens_device *tmdev; const struct tsens_data *data; const struct of_device_id *id; + u32 num_sensors; if (pdev->dev.of_node) dev = &pdev->dev; @@ -130,18 +131,24 @@ static int tsens_probe(struct platform_device *pdev) else data = &data_8960; - if (data->num_sensors <= 0) { + num_sensors = data->num_sensors; + + /* Override driver provided num_sensors, if specified in DT */ + if (np) + of_property_read_u32(np, "#qcom,sensors", &num_sensors); + + if (num_sensors <= 0) { dev_err(dev, "invalid number of sensors\n"); return -EINVAL; } tmdev = devm_kzalloc(dev, sizeof(*tmdev) + - data->num_sensors * sizeof(*s), GFP_KERNEL); + num_sensors * sizeof(*s), GFP_KERNEL); if (!tmdev) return -ENOMEM; tmdev->dev = dev; - tmdev->num_sensors = data->num_sensors; + tmdev->num_sensors = num_sensors; tmdev->ops = data->ops; for (i = 0; i < tmdev->num_sensors; i++) { if (data->hw_ids)