| Message ID | 20180607181306.9766-3-ctatlor97@gmail.com (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Delegated to: | Andy Gross |
| Headers | show |
On Thu, Jun 07, 2018 at 07:12:51PM +0100, Craig Tatlor wrote: > Add bindings for the Qualcomm Battery Monitoring system. > > Signed-off-by: Craig Tatlor <ctatlor97@gmail.com> > --- > * Changes from v4: > Uses proper units and expands some definitions, > along with changing vadc@ to adc@. > > .../bindings/power/supply/qcom_bms.txt | 91 +++++++++++++++++++ > 1 file changed, 91 insertions(+) > create mode 100644 Documentation/devicetree/bindings/power/supply/qcom_bms.txt > > diff --git a/Documentation/devicetree/bindings/power/supply/qcom_bms.txt b/Documentation/devicetree/bindings/power/supply/qcom_bms.txt > new file mode 100644 > index 000000000000..a1a32d6ab460 > --- /dev/null > +++ b/Documentation/devicetree/bindings/power/supply/qcom_bms.txt > @@ -0,0 +1,91 @@ > +Qualcomm Battery Monitoring System > + > +The Qualcomm Battery Monitoring System is found inside of Qualcomm PM8941 > +PMICs. It provides open circuit voltage (OCV) and coulomb counter registers > +that allow the OS to infer a capacity level. > + > +Required properties: > +- compatible: Should contain "qcom,pm8941-bms". > +- reg: Specifies the SPMI address and length of the > + controller's registers. > +- interrupts: OCV threshold interrupt. > +- io-channels: Should contain IIO channel specifier for the > + ADC channel that reports battery temperature. > +- io-channel-names: Should contain "temp". > +- qcom,fcc-temp-legend-celcius: An array containing the temperature, in degC, > + for each column of the full charge capacity > + lookup table. > +- qcom,fcc-lut-microamp-hours: An array of full charge capacity values in uah, > + one entry for each temperature defined in in > + qcom,fcc-temp-legend-celcius. > +- qcom,ocv-temp-legend-celcius: An array containing the temperature, in degC, > + for each column of the OCV lookup table. > +- qcom,ocv-capacity-legend: An array containing the capacity for each > + row of the OCV lookup table. > +- qcom,ocv-lut-microvolt: An array of OCV values in uV, one entry for each > + capacity defined in qcom,ocv-capacity-legend. Need to say which of these are 8-bit values. With that, Reviewed-by: Rob Herring <robh@kernel.org> -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jun 11, 2018 at 12:15:15PM -0600, Rob Herring wrote: > On Thu, Jun 07, 2018 at 07:12:51PM +0100, Craig Tatlor wrote: > > Add bindings for the Qualcomm Battery Monitoring system. > > > > Signed-off-by: Craig Tatlor <ctatlor97@gmail.com> > > --- > > * Changes from v4: > > Uses proper units and expands some definitions, > > along with changing vadc@ to adc@. > > > > .../bindings/power/supply/qcom_bms.txt | 91 +++++++++++++++++++ > > 1 file changed, 91 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/power/supply/qcom_bms.txt > > > > diff --git a/Documentation/devicetree/bindings/power/supply/qcom_bms.txt b/Documentation/devicetree/bindings/power/supply/qcom_bms.txt > > new file mode 100644 > > index 000000000000..a1a32d6ab460 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/power/supply/qcom_bms.txt > > @@ -0,0 +1,91 @@ > > +Qualcomm Battery Monitoring System > > + > > +The Qualcomm Battery Monitoring System is found inside of Qualcomm PM8941 > > +PMICs. It provides open circuit voltage (OCV) and coulomb counter registers > > +that allow the OS to infer a capacity level. > > + > > +Required properties: > > +- compatible: Should contain "qcom,pm8941-bms". > > +- reg: Specifies the SPMI address and length of the > > + controller's registers. > > +- interrupts: OCV threshold interrupt. > > +- io-channels: Should contain IIO channel specifier for the > > + ADC channel that reports battery temperature. > > +- io-channel-names: Should contain "temp". > > +- qcom,fcc-temp-legend-celcius: An array containing the temperature, in degC, > > + for each column of the full charge capacity > > + lookup table. > > +- qcom,fcc-lut-microamp-hours: An array of full charge capacity values in uah, > > + one entry for each temperature defined in in > > + qcom,fcc-temp-legend-celcius. > > +- qcom,ocv-temp-legend-celcius: An array containing the temperature, in degC, > > + for each column of the OCV lookup table. > > +- qcom,ocv-capacity-legend: An array containing the capacity for each > > + row of the OCV lookup table. > > +- qcom,ocv-lut-microvolt: An array of OCV values in uV, one entry for each > > + capacity defined in qcom,ocv-capacity-legend. > > Need to say which of these are 8-bit values. > > With that, > > Reviewed-by: Rob Herring <robh@kernel.org> Thanks for the review, will mark as 8 bit in v6 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/power/supply/qcom_bms.txt b/Documentation/devicetree/bindings/power/supply/qcom_bms.txt new file mode 100644 index 000000000000..a1a32d6ab460 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/qcom_bms.txt @@ -0,0 +1,91 @@ +Qualcomm Battery Monitoring System + +The Qualcomm Battery Monitoring System is found inside of Qualcomm PM8941 +PMICs. It provides open circuit voltage (OCV) and coulomb counter registers +that allow the OS to infer a capacity level. + +Required properties: +- compatible: Should contain "qcom,pm8941-bms". +- reg: Specifies the SPMI address and length of the + controller's registers. +- interrupts: OCV threshold interrupt. +- io-channels: Should contain IIO channel specifier for the + ADC channel that reports battery temperature. +- io-channel-names: Should contain "temp". +- qcom,fcc-temp-legend-celcius: An array containing the temperature, in degC, + for each column of the full charge capacity + lookup table. +- qcom,fcc-lut-microamp-hours: An array of full charge capacity values in uah, + one entry for each temperature defined in in + qcom,fcc-temp-legend-celcius. +- qcom,ocv-temp-legend-celcius: An array containing the temperature, in degC, + for each column of the OCV lookup table. +- qcom,ocv-capacity-legend: An array containing the capacity for each + row of the OCV lookup table. +- qcom,ocv-lut-microvolt: An array of OCV values in uV, one entry for each + capacity defined in qcom,ocv-capacity-legend. + +Example: + pm8941_vadc: adc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + bat_temp { + reg = <VADC_LR_MUX1_BAT_THERM>; + }; + }; + + bms@4000 { + compatible = "qcom,pm8941-bms"; + reg = <0x4000>; + interrupts = <0x0 0x40 0x4 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ocv_thr"; + + io-channels = <&pm8941_vadc VADC_LR_MUX1_BAT_THERM>; + io-channel-names = "temp"; + + qcom,fcc-temp-legend-celsius = /bits/ 8 <(-10) 0 25 50 65>; + qcom,fcc-lut-microamp-hours = <3230000 3260000 3380000 3410000 3360000>; + + qcom,ocv-capacity-legend = /bits/ 8 <100 95 90 85 80 75 + 70 65 60 55 50 45 + 40 35 30 25 20 15 + 10 9 8 7 6 5 4 3 2 + 1 0>; + qcom,ocv-temp-legend-celsius = /bits/ 8 <(-10) 0 25 50 65>; + qcom,ocv-lut-microvolt = <43050000 43050000 43030000 42990000 42950000 + 42770000 42570000 42550000 42510000 42310000 + 42180000 41980000 41970000 41920000 41720000 + 41590000 41390000 41450000 41400000 41200000 + 41010000 40810000 40920000 40890000 40690000 + 40480000 40280000 40440000 40420000 40220000 + 40040000 39840000 40010000 39980000 39780000 + 39620000 39420000 39550000 39560000 39360000 + 39210000 39010000 39090000 39160000 38960000 + 38830000 38630000 38740000 38790000 38590000 + 38550000 38350000 38440000 38430000 38230000 + 38310000 38110000 38230000 38180000 37980000 + 38190000 37990000 38040000 38000000 37800000 + 38060000 37860000 37900000 37840000 37640000 + 37890000 37690000 37770000 37660000 37460000 + 37720000 37520000 37560000 37450000 37250000 + 37480000 37280000 37290000 37250000 37050000 + 37240000 37040000 37020000 36990000 36790000 + 37030000 36830000 36730000 36700000 36500000 + 36940000 36740000 36670000 36640000 36440000 + 36850000 36650000 36600000 36590000 36390000 + 36750000 36550000 36520000 36550000 36350000 + 36690000 36490000 36380000 36400000 36200000 + 36460000 36260000 36180000 36120000 35920000 + 36080000 35880000 35680000 35640000 35440000 + 35510000 35310000 35050000 35020000 34820000 + 34730000 34530000 34300000 34250000 34050000 + 33870000 33670000 33040000 32820000 32620000 + 30000000 30000000 30000000 30000000 30000000>; + }; + }; +};
Add bindings for the Qualcomm Battery Monitoring system. Signed-off-by: Craig Tatlor <ctatlor97@gmail.com> --- * Changes from v4: Uses proper units and expands some definitions, along with changing vadc@ to adc@. .../bindings/power/supply/qcom_bms.txt | 91 +++++++++++++++++++ 1 file changed, 91 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/supply/qcom_bms.txt