diff mbox

dt-bindings: soc: qcom: Fix default clock-freq for qcom,geni-i2c

Message ID 20180613175011.217585-1-dianders@chromium.org (mailing list archive)
State Accepted, archived
Delegated to: Andy Gross
Headers show

Commit Message

Doug Anderson June 13, 2018, 5:50 p.m. UTC
In an early version of the I2C patch that was posted to the list the
default I2C frequency (if none was specified) was 400 kHz.  There was
debate on the list and we decided that it would be more consistent
with the rest of i2c if we defaulted to 100 kHz.  ...but we never
updated the bindings.  Let's fix this.

NOTE: since the i2c driver itself hasn't actually landed yet and the
SoC here is very new it seems terribly unlikely that anyone was
relying on the old 400 kHz number, so I'll assume this is an OK
"incompatible" device tree change.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
---

 Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Bjorn Andersson June 22, 2018, 4:51 p.m. UTC | #1
On Wed 13 Jun 10:50 PDT 2018, Douglas Anderson wrote:

> In an early version of the I2C patch that was posted to the list the
> default I2C frequency (if none was specified) was 400 kHz.  There was
> debate on the list and we decided that it would be more consistent
> with the rest of i2c if we defaulted to 100 kHz.  ...but we never
> updated the bindings.  Let's fix this.
> 
> NOTE: since the i2c driver itself hasn't actually landed yet and the
> SoC here is very new it seems terribly unlikely that anyone was
> relying on the old 400 kHz number, so I'll assume this is an OK
> "incompatible" device tree change.
> 
> Signed-off-by: Douglas Anderson <dianders@chromium.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

> ---
> 
>  Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
> index d330c73de9a2..68b7d6207e3d 100644
> --- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
> @@ -39,7 +39,7 @@ Required properties:
>  
>  Optional property:
>  - clock-frequency:	Desired I2C bus clock frequency in Hz.
> -			When missing default to 400000Hz.
> +			When missing default to 100000Hz.
>  
>  Child nodes should conform to I2C bus binding as described in i2c.txt.
>  
> -- 
> 2.18.0.rc1.244.gcf134e6275-goog
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Wolfram Sang June 23, 2018, 3:16 p.m. UTC | #2
On Wed, Jun 13, 2018 at 10:50:11AM -0700, Douglas Anderson wrote:
> In an early version of the I2C patch that was posted to the list the
> default I2C frequency (if none was specified) was 400 kHz.  There was
> debate on the list and we decided that it would be more consistent
> with the rest of i2c if we defaulted to 100 kHz.  ...but we never
> updated the bindings.  Let's fix this.
> 
> NOTE: since the i2c driver itself hasn't actually landed yet and the
> SoC here is very new it seems terribly unlikely that anyone was
> relying on the old 400 kHz number, so I'll assume this is an OK
> "incompatible" device tree change.
> 
> Signed-off-by: Douglas Anderson <dianders@chromium.org>

Acked-by: Wolfram Sang <wsa@the-dreams.de>
Rob Herring (Arm) June 26, 2018, 7:24 p.m. UTC | #3
On Wed, Jun 13, 2018 at 10:50:11AM -0700, Douglas Anderson wrote:
> In an early version of the I2C patch that was posted to the list the
> default I2C frequency (if none was specified) was 400 kHz.  There was
> debate on the list and we decided that it would be more consistent
> with the rest of i2c if we defaulted to 100 kHz.  ...but we never
> updated the bindings.  Let's fix this.
> 
> NOTE: since the i2c driver itself hasn't actually landed yet and the
> SoC here is very new it seems terribly unlikely that anyone was
> relying on the old 400 kHz number, so I'll assume this is an OK
> "incompatible" device tree change.
> 
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> ---
> 
>  Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Applied, thanks.

Rob
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
index d330c73de9a2..68b7d6207e3d 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.txt
@@ -39,7 +39,7 @@  Required properties:
 
 Optional property:
 - clock-frequency:	Desired I2C bus clock frequency in Hz.
-			When missing default to 400000Hz.
+			When missing default to 100000Hz.
 
 Child nodes should conform to I2C bus binding as described in i2c.txt.