| Message ID | 20180709173200.238457-22-seanpaul@chromium.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Delegated to: | Andy Gross |
| Headers | show |
On Mon, Jul 9, 2018 at 11:40 AM Sean Paul <seanpaul@chromium.org> wrote: > > Signed-off-by: Sean Paul <seanpaul@chromium.org> > --- > arch/arm64/boot/dts/qcom/sdm845.dtsi | 194 +++++++++++++++++++++++++++ > 1 file changed, 194 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > index cdaabeb3c995..339afed856de 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > @@ -5,6 +5,8 @@ > * Copyright (c) 2018, The Linux Foundation. All rights reserved. > */ > > +#include <dt-bindings/clock/qcom,dispcc-sdm845.h> > +#include <dt-bindings/clock/qcom,gcc-sdm845.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > > / { > @@ -221,6 +223,198 @@ > #interrupt-cells = <2>; > }; > > + mdss: mdss@ae00000 { > + compatible = "qcom,dpu-mdss"; > + reg = <0xae00000 0x1000>; > + reg-names = "mdss_phys"; > + > + power-domains = <&dispcc 0>; > + > + clocks = <&gcc GCC_DISP_AHB_CLK>, > + <&gcc GCC_DISP_AXI_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>; > + clock-names = "iface", "bus", "core"; > + clock-frequency = <0 0 300000000>; > + > + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-controller; > + #interrupt-cells = <1>; > + > + /* iommus = <&apps_iommu 0>; */ > + > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + mdss_mdp: mdp@ae01000 { > + compatible = "qcom,dpu"; Needs an SoC specific compatible. Did this binding get reviewed? > + reg = <0x0ae01000 0x8f000>, > + <0x0aeb0000 0x2008>; > + reg-names = "mdp_phys", "vbif_phys"; > + > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_AXI_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>, > + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; > + clock-names = "iface", "bus", "core", "vsync"; > + clock-frequency = <0 0 300000000 19200000>; That's abusing clock-frequency which is generally 1 value. Use assigned-clock-rates instead. > + > + interrupt-parent = <&mdss>; > + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + dpu_intf1_out: endpoint { > + remote-endpoint = <&dsi0_in>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + dpu_intf2_out: endpoint { > + remote-endpoint = <&dsi1_in>; > + }; > + }; > + }; > + }; > + > + dsi0: dsi@ae94000 { > + compatible = "qcom,mdss-dsi-ctrl"; Needs an SoC specific compatible. > + reg = <0xae94000 0x400>; > + reg-names = "dsi_ctrl"; > + > + interrupt-parent = <&mdss>; > + interrupts = <4 0>; > + > + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, > + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, > + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, > + <&dispcc DISP_CC_MDSS_ESC0_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_AXI_CLK>; > + clock-names = "byte_clk", > + "byte_intf_clk", > + "pixel_clk", > + "core_clk", > + "iface_clk", > + "bus_clk"; Should have found this in binding review, but the "_clk" part is redundant. > + > + phys = <&dsi0_phy>; > + phy-names = "dsi-phy"; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + dsi0_in: endpoint { > + remote-endpoint = <&dpu_intf1_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + dsi0_out: endpoint { > + }; > + }; > + }; > + }; > + > + dsi0_phy: dsi-phy@ae94400 { > + compatible = "qcom,dsi-phy-10nm"; > + reg = <0xae94400 0x200>, > + <0xae94a00 0x1e0>, > + <0xae94600 0x280>; > + reg-names = "dsi_phy", > + "dsi_pll", > + "dsi_phy_lane"; > + > + #clock-cells = <1>; > + #phy-cells = <0>; > + > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>; > + clock-names = "iface_clk"; > + }; > + > + dsi1: dsi@ae96000 { > + compatible = "qcom,mdss-dsi-ctrl"; > + reg = <0xae96000 0x400>; > + reg-names = "dsi_ctrl"; > + > + interrupt-parent = <&mdss>; > + interrupts = <5 0>; > + > + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, > + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, > + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, > + <&dispcc DISP_CC_MDSS_ESC1_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_AXI_CLK>; > + clock-names = "byte_clk", > + "byte_intf_clk", > + "pixel_clk", > + "core_clk", > + "iface_clk", > + "bus_clk"; > + > + phys = <&dsi1_phy>; > + phy-names = "dsi-phy"; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + dsi1_in: endpoint { > + remote-endpoint = <&dpu_intf2_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + dsi1_out: endpoint { > + }; > + }; > + }; > + }; > + > + dsi1_phy: dsi-phy@ae96400 { > + compatible = "qcom,dsi-phy-10nm"; > + reg = <0xae96400 0x200>, > + <0xae96a00 0x10e>, > + <0xae96600 0x280>; > + reg-names = "dsi_phy", > + "dsi_pll", > + "dsi_phy_lane"; > + > + #clock-cells = <1>; > + #phy-cells = <0>; > + > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>; > + clock-names = "iface_clk"; > + }; > + }; > + > + dispcc: qcom,dispcc@af00000 { > + compatible = "qcom,sdm845-dispcc"; > + reg = <0xaf00000 0x10000>; > + #clock-cells = <1>; > + #reset-cells = <1>; > + #power-domain-cells = <1>; > + }; > + > spmi_bus: spmi@c440000 { > compatible = "qcom,spmi-pmic-arb"; > reg = <0xc440000 0x1100>, > -- > Sean Paul, Software Engineer, Google / Chromium OS > -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Jul 09, 2018 at 12:07:11PM -0600, Rob Herring wrote: > On Mon, Jul 9, 2018 at 11:40 AM Sean Paul <seanpaul@chromium.org> wrote: > > > > Signed-off-by: Sean Paul <seanpaul@chromium.org> > > --- > > arch/arm64/boot/dts/qcom/sdm845.dtsi | 194 +++++++++++++++++++++++++++ > > 1 file changed, 194 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > > index cdaabeb3c995..339afed856de 100644 > > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > > @@ -5,6 +5,8 @@ > > * Copyright (c) 2018, The Linux Foundation. All rights reserved. > > */ > > > > +#include <dt-bindings/clock/qcom,dispcc-sdm845.h> > > +#include <dt-bindings/clock/qcom,gcc-sdm845.h> > > #include <dt-bindings/interrupt-controller/arm-gic.h> > > > > / { > > @@ -221,6 +223,198 @@ > > #interrupt-cells = <2>; > > }; > > > > + mdss: mdss@ae00000 { > > + compatible = "qcom,dpu-mdss"; > > + reg = <0xae00000 0x1000>; > > + reg-names = "mdss_phys"; > > + > > + power-domains = <&dispcc 0>; > > + > > + clocks = <&gcc GCC_DISP_AHB_CLK>, > > + <&gcc GCC_DISP_AXI_CLK>, > > + <&dispcc DISP_CC_MDSS_MDP_CLK>; > > + clock-names = "iface", "bus", "core"; > > + clock-frequency = <0 0 300000000>; > > + > > + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-controller; > > + #interrupt-cells = <1>; > > + > > + /* iommus = <&apps_iommu 0>; */ > > + > > + #address-cells = <1>; > > + #size-cells = <1>; > > + ranges; > > + > > + mdss_mdp: mdp@ae01000 { > > + compatible = "qcom,dpu"; > Hi Rob, Thanks for the quick turnaround! In addition to below, I'll also beef up the commit message, since I forgot to add any description of the change. > Needs an SoC specific compatible. Did this binding get reviewed? > No, it's part of this set ([PATCH 19/21] dt-bindings: msm/disp: Add bindings for Snapdragon 845 DPU). > > + reg = <0x0ae01000 0x8f000>, > > + <0x0aeb0000 0x2008>; > > + reg-names = "mdp_phys", "vbif_phys"; > > + > > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, > > + <&dispcc DISP_CC_MDSS_AXI_CLK>, > > + <&dispcc DISP_CC_MDSS_MDP_CLK>, > > + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; > > + clock-names = "iface", "bus", "core", "vsync"; > > + clock-frequency = <0 0 300000000 19200000>; > > That's abusing clock-frequency which is generally 1 value. Use > assigned-clock-rates instead. > Thanks, will change. > > + > > + interrupt-parent = <&mdss>; > > + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + reg = <0>; > > + dpu_intf1_out: endpoint { > > + remote-endpoint = <&dsi0_in>; > > + }; > > + }; > > + > > + port@1 { > > + reg = <1>; > > + dpu_intf2_out: endpoint { > > + remote-endpoint = <&dsi1_in>; > > + }; > > + }; > > + }; > > + }; > > + > > + dsi0: dsi@ae94000 { > > + compatible = "qcom,mdss-dsi-ctrl"; > > Needs an SoC specific compatible. > Ok, will add. > > + reg = <0xae94000 0x400>; > > + reg-names = "dsi_ctrl"; > > + > > + interrupt-parent = <&mdss>; > > + interrupts = <4 0>; > > + > > + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, > > + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, > > + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, > > + <&dispcc DISP_CC_MDSS_ESC0_CLK>, > > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > > + <&dispcc DISP_CC_MDSS_AXI_CLK>; > > + clock-names = "byte_clk", > > + "byte_intf_clk", > > + "pixel_clk", > > + "core_clk", > > + "iface_clk", > > + "bus_clk"; > > Should have found this in binding review, but the "_clk" part is redundant. > This binding is already in mainline (Documentation/devicetree/bindings/display/msm/dsi.txt), which is why _clk is here, but not above. Sean > > + > > + phys = <&dsi0_phy>; > > + phy-names = "dsi-phy"; > > + > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + reg = <0>; > > + dsi0_in: endpoint { > > + remote-endpoint = <&dpu_intf1_out>; > > + }; > > + }; > > + > > + port@1 { > > + reg = <1>; > > + dsi0_out: endpoint { > > + }; > > + }; > > + }; > > + }; > > + > > + dsi0_phy: dsi-phy@ae94400 { > > + compatible = "qcom,dsi-phy-10nm"; > > + reg = <0xae94400 0x200>, > > + <0xae94a00 0x1e0>, > > + <0xae94600 0x280>; > > + reg-names = "dsi_phy", > > + "dsi_pll", > > + "dsi_phy_lane"; > > + > > + #clock-cells = <1>; > > + #phy-cells = <0>; > > + > > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>; > > + clock-names = "iface_clk"; > > + }; > > + > > + dsi1: dsi@ae96000 { > > + compatible = "qcom,mdss-dsi-ctrl"; > > + reg = <0xae96000 0x400>; > > + reg-names = "dsi_ctrl"; > > + > > + interrupt-parent = <&mdss>; > > + interrupts = <5 0>; > > + > > + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, > > + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, > > + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, > > + <&dispcc DISP_CC_MDSS_ESC1_CLK>, > > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > > + <&dispcc DISP_CC_MDSS_AXI_CLK>; > > + clock-names = "byte_clk", > > + "byte_intf_clk", > > + "pixel_clk", > > + "core_clk", > > + "iface_clk", > > + "bus_clk"; > > + > > + phys = <&dsi1_phy>; > > + phy-names = "dsi-phy"; > > + > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + reg = <0>; > > + dsi1_in: endpoint { > > + remote-endpoint = <&dpu_intf2_out>; > > + }; > > + }; > > + > > + port@1 { > > + reg = <1>; > > + dsi1_out: endpoint { > > + }; > > + }; > > + }; > > + }; > > + > > + dsi1_phy: dsi-phy@ae96400 { > > + compatible = "qcom,dsi-phy-10nm"; > > + reg = <0xae96400 0x200>, > > + <0xae96a00 0x10e>, > > + <0xae96600 0x280>; > > + reg-names = "dsi_phy", > > + "dsi_pll", > > + "dsi_phy_lane"; > > + > > + #clock-cells = <1>; > > + #phy-cells = <0>; > > + > > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>; > > + clock-names = "iface_clk"; > > + }; > > + }; > > + > > + dispcc: qcom,dispcc@af00000 { > > + compatible = "qcom,sdm845-dispcc"; > > + reg = <0xaf00000 0x10000>; > > + #clock-cells = <1>; > > + #reset-cells = <1>; > > + #power-domain-cells = <1>; > > + }; > > + > > spmi_bus: spmi@c440000 { > > compatible = "qcom,spmi-pmic-arb"; > > reg = <0xc440000 0x1100>, > > -- > > Sean Paul, Software Engineer, Google / Chromium OS > >
On Mon, Jul 9, 2018 at 2:35 PM, Sean Paul <seanpaul@chromium.org> wrote: > On Mon, Jul 09, 2018 at 12:07:11PM -0600, Rob Herring wrote: >> On Mon, Jul 9, 2018 at 11:40 AM Sean Paul <seanpaul@chromium.org> wrote: >> > >> > Signed-off-by: Sean Paul <seanpaul@chromium.org> >> > --- >> > arch/arm64/boot/dts/qcom/sdm845.dtsi | 194 +++++++++++++++++++++++++++ >> > 1 file changed, 194 insertions(+) >> > >> > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi >> > index cdaabeb3c995..339afed856de 100644 >> > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi >> > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi >> > @@ -5,6 +5,8 @@ >> > * Copyright (c) 2018, The Linux Foundation. All rights reserved. >> > */ >> > >> > +#include <dt-bindings/clock/qcom,dispcc-sdm845.h> >> > +#include <dt-bindings/clock/qcom,gcc-sdm845.h> >> > #include <dt-bindings/interrupt-controller/arm-gic.h> >> > >> > / { >> > @@ -221,6 +223,198 @@ >> > #interrupt-cells = <2>; >> > }; >> > >> > + mdss: mdss@ae00000 { >> > + compatible = "qcom,dpu-mdss"; >> > + reg = <0xae00000 0x1000>; >> > + reg-names = "mdss_phys"; >> > + >> > + power-domains = <&dispcc 0>; >> > + >> > + clocks = <&gcc GCC_DISP_AHB_CLK>, >> > + <&gcc GCC_DISP_AXI_CLK>, >> > + <&dispcc DISP_CC_MDSS_MDP_CLK>; >> > + clock-names = "iface", "bus", "core"; >> > + clock-frequency = <0 0 300000000>; >> > + >> > + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; >> > + interrupt-controller; >> > + #interrupt-cells = <1>; >> > + >> > + /* iommus = <&apps_iommu 0>; */ >> > + >> > + #address-cells = <1>; >> > + #size-cells = <1>; >> > + ranges; >> > + >> > + mdss_mdp: mdp@ae01000 { >> > + compatible = "qcom,dpu"; >> > > Hi Rob, > Thanks for the quick turnaround! In addition to below, I'll also beef up the > commit message, since I forgot to add any description of the change. > > >> Needs an SoC specific compatible. Did this binding get reviewed? >> > > No, it's part of this set ([PATCH 19/21] dt-bindings: msm/disp: Add bindings for > Snapdragon 845 DPU). note that for display controller and DSI we've been able to reliably read the version of the block from hardware. BR, -R > >> > + reg = <0x0ae01000 0x8f000>, >> > + <0x0aeb0000 0x2008>; >> > + reg-names = "mdp_phys", "vbif_phys"; >> > + >> > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, >> > + <&dispcc DISP_CC_MDSS_AXI_CLK>, >> > + <&dispcc DISP_CC_MDSS_MDP_CLK>, >> > + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; >> > + clock-names = "iface", "bus", "core", "vsync"; >> > + clock-frequency = <0 0 300000000 19200000>; >> >> That's abusing clock-frequency which is generally 1 value. Use >> assigned-clock-rates instead. >> > > Thanks, will change. > >> > + >> > + interrupt-parent = <&mdss>; >> > + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; >> > + >> > + ports { >> > + #address-cells = <1>; >> > + #size-cells = <0>; >> > + >> > + port@0 { >> > + reg = <0>; >> > + dpu_intf1_out: endpoint { >> > + remote-endpoint = <&dsi0_in>; >> > + }; >> > + }; >> > + >> > + port@1 { >> > + reg = <1>; >> > + dpu_intf2_out: endpoint { >> > + remote-endpoint = <&dsi1_in>; >> > + }; >> > + }; >> > + }; >> > + }; >> > + >> > + dsi0: dsi@ae94000 { >> > + compatible = "qcom,mdss-dsi-ctrl"; >> >> Needs an SoC specific compatible. >> > > Ok, will add. > >> > + reg = <0xae94000 0x400>; >> > + reg-names = "dsi_ctrl"; >> > + >> > + interrupt-parent = <&mdss>; >> > + interrupts = <4 0>; >> > + >> > + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, >> > + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, >> > + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, >> > + <&dispcc DISP_CC_MDSS_ESC0_CLK>, >> > + <&dispcc DISP_CC_MDSS_AHB_CLK>, >> > + <&dispcc DISP_CC_MDSS_AXI_CLK>; >> > + clock-names = "byte_clk", >> > + "byte_intf_clk", >> > + "pixel_clk", >> > + "core_clk", >> > + "iface_clk", >> > + "bus_clk"; >> >> Should have found this in binding review, but the "_clk" part is redundant. >> > > This binding is already in mainline (Documentation/devicetree/bindings/display/msm/dsi.txt), > which is why _clk is here, but not above. > > Sean >> > + >> > + phys = <&dsi0_phy>; >> > + phy-names = "dsi-phy"; >> > + >> > + #address-cells = <1>; >> > + #size-cells = <0>; >> > + >> > + ports { >> > + #address-cells = <1>; >> > + #size-cells = <0>; >> > + >> > + port@0 { >> > + reg = <0>; >> > + dsi0_in: endpoint { >> > + remote-endpoint = <&dpu_intf1_out>; >> > + }; >> > + }; >> > + >> > + port@1 { >> > + reg = <1>; >> > + dsi0_out: endpoint { >> > + }; >> > + }; >> > + }; >> > + }; >> > + >> > + dsi0_phy: dsi-phy@ae94400 { >> > + compatible = "qcom,dsi-phy-10nm"; >> > + reg = <0xae94400 0x200>, >> > + <0xae94a00 0x1e0>, >> > + <0xae94600 0x280>; >> > + reg-names = "dsi_phy", >> > + "dsi_pll", >> > + "dsi_phy_lane"; >> > + >> > + #clock-cells = <1>; >> > + #phy-cells = <0>; >> > + >> > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>; >> > + clock-names = "iface_clk"; >> > + }; >> > + >> > + dsi1: dsi@ae96000 { >> > + compatible = "qcom,mdss-dsi-ctrl"; >> > + reg = <0xae96000 0x400>; >> > + reg-names = "dsi_ctrl"; >> > + >> > + interrupt-parent = <&mdss>; >> > + interrupts = <5 0>; >> > + >> > + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, >> > + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, >> > + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, >> > + <&dispcc DISP_CC_MDSS_ESC1_CLK>, >> > + <&dispcc DISP_CC_MDSS_AHB_CLK>, >> > + <&dispcc DISP_CC_MDSS_AXI_CLK>; >> > + clock-names = "byte_clk", >> > + "byte_intf_clk", >> > + "pixel_clk", >> > + "core_clk", >> > + "iface_clk", >> > + "bus_clk"; >> > + >> > + phys = <&dsi1_phy>; >> > + phy-names = "dsi-phy"; >> > + >> > + #address-cells = <1>; >> > + #size-cells = <0>; >> > + >> > + ports { >> > + #address-cells = <1>; >> > + #size-cells = <0>; >> > + >> > + port@0 { >> > + reg = <0>; >> > + dsi1_in: endpoint { >> > + remote-endpoint = <&dpu_intf2_out>; >> > + }; >> > + }; >> > + >> > + port@1 { >> > + reg = <1>; >> > + dsi1_out: endpoint { >> > + }; >> > + }; >> > + }; >> > + }; >> > + >> > + dsi1_phy: dsi-phy@ae96400 { >> > + compatible = "qcom,dsi-phy-10nm"; >> > + reg = <0xae96400 0x200>, >> > + <0xae96a00 0x10e>, >> > + <0xae96600 0x280>; >> > + reg-names = "dsi_phy", >> > + "dsi_pll", >> > + "dsi_phy_lane"; >> > + >> > + #clock-cells = <1>; >> > + #phy-cells = <0>; >> > + >> > + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>; >> > + clock-names = "iface_clk"; >> > + }; >> > + }; >> > + >> > + dispcc: qcom,dispcc@af00000 { >> > + compatible = "qcom,sdm845-dispcc"; >> > + reg = <0xaf00000 0x10000>; >> > + #clock-cells = <1>; >> > + #reset-cells = <1>; >> > + #power-domain-cells = <1>; >> > + }; >> > + >> > spmi_bus: spmi@c440000 { >> > compatible = "qcom,spmi-pmic-arb"; >> > reg = <0xc440000 0x1100>, >> > -- >> > Sean Paul, Software Engineer, Google / Chromium OS >> > > > -- > Sean Paul, Software Engineer, Google / Chromium OS -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index cdaabeb3c995..339afed856de 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -5,6 +5,8 @@ * Copyright (c) 2018, The Linux Foundation. All rights reserved. */ +#include <dt-bindings/clock/qcom,dispcc-sdm845.h> +#include <dt-bindings/clock/qcom,gcc-sdm845.h> #include <dt-bindings/interrupt-controller/arm-gic.h> / { @@ -221,6 +223,198 @@ #interrupt-cells = <2>; }; + mdss: mdss@ae00000 { + compatible = "qcom,dpu-mdss"; + reg = <0xae00000 0x1000>; + reg-names = "mdss_phys"; + + power-domains = <&dispcc 0>; + + clocks = <&gcc GCC_DISP_AHB_CLK>, + <&gcc GCC_DISP_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>; + clock-names = "iface", "bus", "core"; + clock-frequency = <0 0 300000000>; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + /* iommus = <&apps_iommu 0>; */ + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mdss_mdp: mdp@ae01000 { + compatible = "qcom,dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp_phys", "vbif_phys"; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>, + <&dispcc DISP_CC_MDSS_MDP_CLK>, + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "iface", "bus", "core", "vsync"; + clock-frequency = <0 0 300000000 19200000>; + + interrupt-parent = <&mdss>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + + dsi0: dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0xae94000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4 0>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte_clk", + "byte_intf_clk", + "pixel_clk", + "core_clk", + "iface_clk", + "bus_clk"; + + phys = <&dsi0_phy>; + phy-names = "dsi-phy"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi0_phy: dsi-phy@ae94400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0xae94400 0x200>, + <0xae94a00 0x1e0>, + <0xae94600 0x280>; + reg-names = "dsi_phy", + "dsi_pll", + "dsi_phy_lane"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>; + clock-names = "iface_clk"; + }; + + dsi1: dsi@ae96000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0xae96000 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5 0>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>, + <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK1_CLK>, + <&dispcc DISP_CC_MDSS_ESC1_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&dispcc DISP_CC_MDSS_AXI_CLK>; + clock-names = "byte_clk", + "byte_intf_clk", + "pixel_clk", + "core_clk", + "iface_clk", + "bus_clk"; + + phys = <&dsi1_phy>; + phy-names = "dsi-phy"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&dpu_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi1_phy: dsi-phy@ae96400 { + compatible = "qcom,dsi-phy-10nm"; + reg = <0xae96400 0x200>, + <0xae96a00 0x10e>, + <0xae96600 0x280>; + reg-names = "dsi_phy", + "dsi_pll", + "dsi_phy_lane"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>; + clock-names = "iface_clk"; + }; + }; + + dispcc: qcom,dispcc@af00000 { + compatible = "qcom,sdm845-dispcc"; + reg = <0xaf00000 0x10000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0xc440000 0x1100>,
Signed-off-by: Sean Paul <seanpaul@chromium.org> --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 194 +++++++++++++++++++++++++++ 1 file changed, 194 insertions(+)