diff mbox

[v3,11/19] drm/msm: higher values of pclk can exceed 32 bits when multiplied by a factor

Message ID 20180720204315.19054-12-seanpaul@chromium.org (mailing list archive)
State Not Applicable, archived
Delegated to: Andy Gross
Headers show

Commit Message

Sean Paul July 20, 2018, 8:43 p.m. UTC 
From: Abhinav Kumar <abhinavk@codeaurora.org>

Make the pclk_rate u64 to accommodate higher pixel clock
rates.

Changes in v3:
- Converted pclk_rate to u32 (Archit)
- Rebase on dsi cleanup set in msm-next

Cc: Sibi Sankar <sibis@codeaurora.org>
Cc: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index f6c6eddbcec7..dff8e88efb66 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -702,6 +702,7 @@  int dsi_calc_clk_rate_v2(struct msm_dsi_host *msm_host, bool is_dual_dsi)
 	u8 lanes = msm_host->lanes;
 	u32 bpp = dsi_get_bpp(msm_host->format);
 	u32 pclk_rate;
+	u64 pclk_bpp;
 	unsigned int esc_mhz, esc_div;
 	unsigned long byte_mhz;
 
@@ -716,13 +717,15 @@  int dsi_calc_clk_rate_v2(struct msm_dsi_host *msm_host, bool is_dual_dsi)
 	if (is_dual_dsi)
 		pclk_rate /= 2;
 
+	pclk_bpp = pclk_rate * bpp;
 	if (lanes > 0) {
-		msm_host->byte_clk_rate = (pclk_rate * bpp) / (8 * lanes);
+		do_div(pclk_bpp, (8 * lanes));
 	} else {
 		pr_err("%s: forcing mdss_dsi lanes to 1\n", __func__);
-		msm_host->byte_clk_rate = (pclk_rate * bpp) / 8;
+		do_div(pclk_bpp, 8);
 	}
 	msm_host->pixel_clk_rate = pclk_rate;
+	msm_host->byte_clk_rate = pclk_bpp;
 
 	DBG("pclk=%d, bclk=%d", msm_host->pixel_clk_rate,
 				msm_host->byte_clk_rate);