new file mode 100644
@@ -0,0 +1,32 @@
+Qualcomm SMD-RPM interconnect driver binding
+------------------------------------------------
+The RPM (Resource Power Manager) is a dedicated hardware engine
+for managing the shared SoC resources in order to keep the lowest
+power profile. It communicates with other hardware subsystems via
+the shared memory driver (SMD) back-end and accepts requests for
+various resources.
+
+Required properties :
+- compatible : shall contain only one of the following:
+ "qcom,interconnect-smd-rpm"
+
+Example:
+ smd {
+ compatible = "qcom,smd";
+
+ rpm {
+ interrupts = <0 168 1>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+
+ rpm_requests {
+ compatible = "qcom,rpm-msm8916";
+ qcom,smd-channels = "rpm_requests";
+
+ interconnect-smd-rpm {
+ compatible = "qcom,interconnect-smd-rpm";
+ };
+
+ };
+ };
+ };
new file mode 100644
@@ -0,0 +1,14 @@
+config INTERCONNECT_QCOM
+ bool "Qualcomm Network-on-Chip interconnect drivers"
+ depends on INTERCONNECT
+ depends on ARCH_QCOM || COMPILE_TEST
+ help
+ Support for Qualcomm's Network-on-Chip interconnect hardware.
+
+config INTERCONNECT_QCOM_SMD_RPM
+ tristate "Qualcomm SMD RPM interconnect driver"
+ depends on INTERCONNECT_QCOM
+ depends on QCOM_SMD_RPM
+ help
+ This is a driver for communicating interconnect related configuration
+ details with a remote processor (RPM) on Qualcomm platforms.
new file mode 100644
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_INTERCONNECT_QCOM_SMD_RPM) += smd-rpm.o
new file mode 100644
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RPM over SMD communication wrapper for interconnects
+ *
+ * Copyright (C) 2018 Linaro Ltd
+ * Author: Georgi Djakov <georgi.djakov@linaro.org>
+ */
+
+#include <linux/interconnect-provider.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/soc/qcom/smd-rpm.h>
+#include "smd-rpm.h"
+
+#define RPM_KEY_BW 0x00007762
+
+static struct qcom_icc_rpm {
+ struct qcom_smd_rpm *rpm;
+} icc_rpm_smd;
+
+struct icc_rpm_smd_req {
+ __le32 key;
+ __le32 nbytes;
+ __le32 value;
+};
+
+bool qcom_icc_rpm_smd_available(void)
+{
+ if (!icc_rpm_smd.rpm)
+ return false;
+
+ return true;
+}
+EXPORT_SYMBOL_GPL(qcom_icc_rpm_smd_available);
+
+int qcom_icc_rpm_smd_send(int ctx, int rsc_type, int id, u32 val)
+{
+ struct icc_rpm_smd_req req = {
+ .key = cpu_to_le32(RPM_KEY_BW),
+ .nbytes = cpu_to_le32(sizeof(u32)),
+ .value = cpu_to_le32(val),
+ };
+
+ return qcom_rpm_smd_write(icc_rpm_smd.rpm, ctx, rsc_type, id, &req,
+ sizeof(req));
+}
+EXPORT_SYMBOL_GPL(qcom_icc_rpm_smd_send);
+
+static int qcom_icc_rpm_smd_probe(struct platform_device *pdev)
+{
+ icc_rpm_smd.rpm = dev_get_drvdata(pdev->dev.parent);
+ if (!icc_rpm_smd.rpm) {
+ dev_err(&pdev->dev, "unable to retrieve handle to RPM\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id qcom_icc_rpm_smd_dt_match[] = {
+ { .compatible = "qcom,interconnect-smd-rpm", },
+ { },
+};
+
+MODULE_DEVICE_TABLE(of, qcom_icc_rpm_smd_dt_match);
+
+static struct platform_driver qcom_interconnect_rpm_smd_driver = {
+ .driver = {
+ .name = "qcom-interconnect-smd-rpm",
+ .of_match_table = qcom_icc_rpm_smd_dt_match,
+ },
+ .probe = qcom_icc_rpm_smd_probe,
+};
+
+static int __init rpm_smd_interconnect_init(void)
+{
+ return platform_driver_register(&qcom_interconnect_rpm_smd_driver);
+}
+subsys_initcall(rpm_smd_interconnect_init);
+
+static void __exit rpm_smd_interconnect_exit(void)
+{
+ platform_driver_unregister(&qcom_interconnect_rpm_smd_driver);
+}
+module_exit(rpm_smd_interconnect_exit)
+
+MODULE_AUTHOR("Georgi Djakov <georgi.djakov@linaro.org>");
+MODULE_DESCRIPTION("Qualcomm SMD RPM interconnect driver");
+MODULE_LICENSE("GPL v2");
new file mode 100644
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2018, Linaro Ltd.
+ * Author: Georgi Djakov <georgi.djakov@linaro.org>
+ */
+
+#ifndef __DRIVERS_INTERCONNECT_QCOM_SMD_RPM_H
+#define __DRIVERS_INTERCONNECT_QCOM_SMD_RPM_H
+
+
+#include <linux/soc/qcom/smd-rpm.h>
+
+bool qcom_icc_rpm_smd_available(void);
+int qcom_icc_rpm_smd_send(int ctx, int rsc_type, int id, u32 val);
+
+#endif
On some Qualcomm SoCs, there is a remote processor, which controls some of the Network-On-Chip interconnect resources. Other CPUs express their needs by communicating with this processor. Add a driver to handle communication with this remote processor. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> --- .../bindings/interconnect/qcom-smd.txt | 32 +++++++ drivers/interconnect/qcom/Kconfig | 14 +++ drivers/interconnect/qcom/Makefile | 2 + drivers/interconnect/qcom/smd-rpm.c | 91 +++++++++++++++++++ drivers/interconnect/qcom/smd-rpm.h | 16 ++++ 5 files changed, 155 insertions(+) create mode 100644 Documentation/devicetree/bindings/interconnect/qcom-smd.txt create mode 100644 drivers/interconnect/qcom/Kconfig create mode 100644 drivers/interconnect/qcom/Makefile create mode 100644 drivers/interconnect/qcom/smd-rpm.c create mode 100644 drivers/interconnect/qcom/smd-rpm.h -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html