diff mbox series

[v13,6/7] Bluetooth: btqca: Add wcn3990 firmware download support.

Message ID 20180802190732.4811-7-bgodavar@codeaurora.org (mailing list archive)
State Not Applicable, archived
Delegated to: Andy Gross
Headers show
Series [v13,1/7] dt-bindings: net: bluetooth: Add device tree bindings for QTI chip wcn3990 | expand

Commit Message

Balakrishna Godavarthi Aug. 2, 2018, 7:07 p.m. UTC 
This patch enables the RAM and NV patch download for wcn3990.

Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
 drivers/bluetooth/btqca.c | 25 +++++++++++++++++++++----
 1 file changed, 21 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index 479179c54dcf..488f5e7521dd 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -336,6 +336,7 @@  int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 {
 	struct rome_config config;
 	int err;
+	u8 rom_ver;
 
 	bt_dev_dbg(hdev, "QCA setup on UART");
 
@@ -343,8 +344,19 @@  int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 
 	/* Download rampatch file */
 	config.type = TLV_TYPE_PATCH;
-	snprintf(config.fwname, sizeof(config.fwname), "qca/rampatch_%08x.bin",
-		 soc_ver);
+	if (soc_type == QCA_WCN3990) {
+		/* Firmware files to download are based on ROM version.
+		 * ROM version is derived from last two bytes of soc_ver.
+		 */
+		rom_ver = ((soc_ver & 0x00000f00) >> 0x04) |
+			    (soc_ver & 0x0000000f);
+		snprintf(config.fwname, sizeof(config.fwname),
+			 "qca/crbtfw%02x.tlv", rom_ver);
+	} else {
+		snprintf(config.fwname, sizeof(config.fwname),
+			 "qca/rampatch_%08x.bin", soc_ver);
+	}
+
 	err = qca_download_firmware(hdev, &config);
 	if (err < 0) {
 		bt_dev_err(hdev, "QCA Failed to download patch (%d)", err);
@@ -353,8 +365,13 @@  int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 
 	/* Download NVM configuration */
 	config.type = TLV_TYPE_NVM;
-	snprintf(config.fwname, sizeof(config.fwname), "qca/nvm_%08x.bin",
-		 soc_ver);
+	if (soc_type == QCA_WCN3990)
+		snprintf(config.fwname, sizeof(config.fwname),
+			 "qca/crnv%02x.bin", rom_ver);
+	else
+		snprintf(config.fwname, sizeof(config.fwname),
+			 "qca/nvm_%08x.bin", soc_ver);
+
 	err = qca_download_firmware(hdev, &config);
 	if (err < 0) {
 		bt_dev_err(hdev, "QCA Failed to download NVM (%d)", err);