diff mbox series

[v4,3/5] arm64: dts: qcom: sdm845: add UFS controller

Message ID 20181024172735.154304-4-evgreen@chromium.org (mailing list archive)
State Not Applicable, archived
Headers show
Series arm64: dts: qcom: sdm845: Add UFS DT nodes | expand

Commit Message

Evan Green Oct. 24, 2018, 5:27 p.m. UTC 
Add the UFS controller and PHY to SDM845.

Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>

---
As Doug mentioned in v2, this should land after (or with) the driver fix
in this series.

Changes in v4: None
Changes in v3: None
Changes in v2:
- Renamed ufsphy to phy (Vivek)
- Removed #clock-cells (Vivek)

 arch/arm64/boot/dts/qcom/sdm845.dtsi | 67 ++++++++++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index b72bdb0a31a5..9c72edb678ec 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -808,6 +808,73 @@ 
 			};
 		};
 
+		ufshc1: ufshc@1d84000 {
+			compatible = "qcom,sdm845-ufshc", "qcom,ufshc",
+				     "jedec,ufs-2.0";
+			reg = <0x1d84000 0x2500>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&ufsphy1_lanes>;
+			phy-names = "ufsphy";
+			lanes-per-direction = <2>;
+			power-domains = <&gcc UFS_PHY_GDSC>;
+
+			clock-names =
+				"core_clk",
+				"bus_aggr_clk",
+				"iface_clk",
+				"core_clk_unipro",
+				"ref_clk",
+				"tx_lane0_sync_clk",
+				"rx_lane0_sync_clk",
+				"rx_lane1_sync_clk";
+			clocks =
+				<&gcc GCC_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+				<&gcc GCC_UFS_PHY_AHB_CLK>,
+				<&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+				<&rpmhcc RPMH_CXO_CLK>,
+				<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+				<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+			freq-table-hz =
+				<50000000 200000000>,
+				<0 0>,
+				<0 0>,
+				<37500000 150000000>,
+				<0 0>,
+				<0 0>,
+				<0 0>,
+				<0 0>;
+
+			resets = <&gcc GCC_UFS_PHY_BCR>;
+			reset-names = "rst";
+
+			status = "disabled";
+		};
+
+		ufsphy1: phy@1d87000 {
+			compatible = "qcom,sdm845-qmp-ufs-phy";
+			reg = <0x1d87000 0x18c>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			clock-names = "ref",
+				      "ref_aux";
+			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
+				 <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+			status = "disabled";
+
+			ufsphy1_lanes: lanes@1d87400 {
+				reg = <0x1d87400 0x108>,
+				      <0x1d87600 0x1e0>,
+				      <0x1d87c00 0x1dc>,
+				      <0x1d87800 0x108>,
+				      <0x1d87a00 0x1e0>;
+				#phy-cells = <0>;
+			};
+		};
+
 		tcsr_mutex_regs: syscon@1f40000 {
 			compatible = "syscon";
 			reg = <0x1f40000 0x40000>;