| Message ID | 20190208021631.30252-10-masneyb@onstation.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Delegated to: | Andy Gross |
| Headers | show |
| Series | qcom: ssbi-gpio: add support for hierarchical IRQ chip | expand |
diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index e49f67ad5dbc..02afc6a42005 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -323,13 +323,8 @@ pmicgpio: gpio@150 { compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio"; - interrupt-parent = <&pmicintc>; - interrupts = <24 IRQ_TYPE_NONE>, - <25 IRQ_TYPE_NONE>, - <26 IRQ_TYPE_NONE>, - <27 IRQ_TYPE_NONE>, - <28 IRQ_TYPE_NONE>, - <29 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; };
Add interrupt controller properties now that ssbi-gpio is a proper hierarchical IRQ chip. The interrupts property is no longer needed so remove it. Note that the IRQs started at 24 instead of 192 like all of the other PMICs. This is the same IRQs as the MPP for this board. qcom-pm8xxx.c doesn't set the shared IRQs so this is highly likely to be a copy and paste error. Signed-off-by: Brian Masney <masneyb@onstation.org> --- Changes since v1: - None arch/arm/boot/dts/qcom-mdm9615.dtsi | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-)