@@ -13,12 +13,13 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
+#include <linux/soc/qcom/irq.h>
#include <linux/spinlock.h>
-#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/types.h>
#define PDC_MAX_IRQS 126
+#define PDC_MAX_GPIO_IRQS 256
#define CLEAR_INTR(reg, intr) (reg & ~(1 << intr))
#define ENABLE_INTR(reg, intr) (reg | (1 << intr))
@@ -169,7 +170,6 @@ static irq_hw_number_t get_parent_hwirq(int pin)
return (region->parent_base + pin - region->pin_base);
}
- WARN_ON(1);
return ~0UL;
}
@@ -232,6 +232,60 @@ static const struct irq_domain_ops qcom_pdc_ops = {
.free = irq_domain_free_irqs_common,
};
+static int qcom_pdc_gpio_alloc(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs, void *data)
+{
+ struct qcom_irq_fwspec *qcom_fwspec = data;
+ struct irq_fwspec *fwspec = &qcom_fwspec->fwspec;
+ struct irq_fwspec parent_fwspec;
+ irq_hw_number_t hwirq, parent_hwirq;
+ unsigned int type;
+ int ret;
+
+ ret = qcom_pdc_translate(domain, fwspec, &hwirq, &type);
+ if (ret)
+ return -EINVAL;
+
+ parent_hwirq = get_parent_hwirq(hwirq);
+ if (parent_hwirq == ~0UL)
+ return -EINVAL;
+
+ ret = irq_domain_set_hwirq_and_chip(domain, virq, hwirq,
+ &qcom_pdc_gic_chip, NULL);
+ if (ret)
+ return ret;
+
+ qcom_fwspec->mask = true;
+
+ if (type & IRQ_TYPE_EDGE_BOTH)
+ type = IRQ_TYPE_EDGE_RISING;
+
+ if (type & IRQ_TYPE_LEVEL_MASK)
+ type = IRQ_TYPE_LEVEL_HIGH;
+
+ parent_fwspec.fwnode = domain->parent->fwnode;
+ parent_fwspec.param_count = 3;
+ parent_fwspec.param[0] = 0;
+ parent_fwspec.param[1] = parent_hwirq;
+ parent_fwspec.param[2] = type;
+
+ return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs,
+ &parent_fwspec);
+}
+
+static int qcom_pdc_gpio_domain_select(struct irq_domain *d,
+ struct irq_fwspec *fwspec,
+ enum irq_domain_bus_token bus_token)
+{
+ return (bus_token == DOMAIN_BUS_WAKEUP);
+}
+
+static const struct irq_domain_ops qcom_pdc_gpio_ops = {
+ .select = qcom_pdc_gpio_domain_select,
+ .alloc = qcom_pdc_gpio_alloc,
+ .free = irq_domain_free_irqs_common,
+};
+
static int pdc_setup_pin_mapping(struct device_node *np)
{
int ret, n;
@@ -270,7 +324,7 @@ static int pdc_setup_pin_mapping(struct device_node *np)
static int qcom_pdc_init(struct device_node *node, struct device_node *parent)
{
- struct irq_domain *parent_domain, *pdc_domain;
+ struct irq_domain *parent_domain, *pdc_domain, *pdc_gpio_domain;
int ret;
pdc_base = of_iomap(node, 0);
@@ -301,6 +355,18 @@ static int qcom_pdc_init(struct device_node *node, struct device_node *parent)
goto fail;
}
+ pdc_gpio_domain = irq_domain_create_hierarchy(parent_domain, 0,
+ PDC_MAX_GPIO_IRQS,
+ of_fwnode_handle(node),
+ &qcom_pdc_gpio_ops, NULL);
+ if (!pdc_gpio_domain) {
+ pr_err("%pOF: GIC domain add failed for GPIO domain\n", node);
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ irq_domain_update_bus_token(pdc_gpio_domain, DOMAIN_BUS_WAKEUP);
+
return 0;
fail:
new file mode 100644
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __QCOM_IRQ_H
+#define __QCOM_IRQ_H
+
+#include <linux/irqdomain.h>
+
+/**
+ * struct qcom_irq_fwspec - qcom specific irq fwspec wrapper
+ * @fwspec: irq fwspec
+ * @mask: if true, keep the irq masked in the gpio controller
+ *
+ * Use this structure to communicate between the parent irq chip, MPM or PDC,
+ * to the gpio chip, TLMM, about the gpio being allocated in the parent
+ * and if the gpio chip should keep the line masked because the parent irq
+ * chip is handling everything about the irq line.
+ */
+struct qcom_irq_fwspec {
+ struct irq_fwspec fwspec;
+ bool mask;
+};
+
+#endif
Introduce a new domain for wakeup capable GPIOs. The domain can be requested using the bus token DOMAIN_BUS_WAKEUP. In the following patches, we will specify PDC as the wakeup-parent for the TLMM GPIO irqchip. Requesting a wakeup GPIO will setup the GPIO and the corresponding PDC interrupt as its parent. Co-developed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Lina Iyer <ilina@codeaurora.org> --- Changes in v4: - Remove vestigial changes from v2 Changes in v3: - Remove PDC GPIO map data (moved to DT) - hwirq passed in .alloc() is a PDC pin now Changes in v2: - Remove separate file for PDC GPIO map data - Error checks and return - Whitespace fixes --- drivers/irqchip/qcom-pdc.c | 72 ++++++++++++++++++++++++++++++++++-- include/linux/soc/qcom/irq.h | 23 ++++++++++++ 2 files changed, 92 insertions(+), 3 deletions(-) create mode 100644 include/linux/soc/qcom/irq.h