| Message ID | 20190314002027.7833-6-helen.koike@collabora.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | drm: Fix fb changes for async updates | expand |
On Wed, Mar 13, 2019 at 09:20:26PM -0300, Helen Koike wrote: > In the case of a normal sync update, the preparation of framebuffers (be > it calling drm_atomic_helper_prepare_planes() or doing setups with > drm_framebuffer_get()) are performed in the new_state and the respective > cleanups are performed in the old_state. > > In the case of async updates, the preparation is also done in the > new_state but the cleanups are done in the new_state (because updates > are performed in place, i.e. in the current state). > > The current code blocks async udpates when the fb is changed, turning > async updates into sync updates, slowing down cursor updates and > introducing regressions in igt tests with errors of type: > > "CRITICAL: completed 97 cursor updated in a period of 30 flips, we > expect to complete approximately 15360 updates, with the threshold set > at 7680" > > Fb changes in async updates were prevented to avoid the following scenario: > > - Async update, oldfb = NULL, newfb = fb1, prepare fb1, cleanup fb1 > - Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb2 > - Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2 (wrong) > Where we have a single call to prepare fb2 but double cleanup call to fb2. > > To solve the above problems, instead of blocking async fb changes, we > place the old framebuffer in the new_state object, so when the code > performs cleanups in the new_state it will cleanup the old_fb and we > will have the following scenario instead: > > - Async update, oldfb = NULL, newfb = fb1, prepare fb1, no cleanup > - Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb1 > - Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2 > > Where calls to prepare/cleanup are balanced. > > Cc: <stable@vger.kernel.org> # v4.14+ I'm not convinced this should be cc: stable, seems more in the improvement category than a bug fix. > Fixes: 25dc194b34dd ("drm: Block fb changes for async plane updates") > Suggested-by: Boris Brezillon <boris.brezillon@collabora.com> > Signed-off-by: Helen Koike <helen.koike@collabora.com> > Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> > Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> > > --- > Hello, > > I added a TODO in drm_atomic_helper_async_commit() regarding doing a > full state swap(), Boris and Nicholas, let me know if this is ok and if > I can keep your Reviewed-by tags) > > As mentioned in the cover letter, I tested in almost all platforms with > igt plane_cursor_legacy and kms_cursor_legacy and I didn't see any > regressions. But I couldn't test on MSM and AMD because I don't have > the hardware I would appreciate if anyone could help me testing those. > > Thanks! > Helen > > Changes in v3: > - Add Reviewed-by tags > - Add TODO in drm_atomic_helper_async_commit() > > Changes in v2: > - Change the order of the patch in the series, add this as the last one. > - Add documentation > - s/ballanced/balanced > > drivers/gpu/drm/drm_atomic_helper.c | 22 ++++++++++++---------- > include/drm/drm_modeset_helper_vtables.h | 5 +++++ > 2 files changed, 17 insertions(+), 10 deletions(-) > > diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c > index 2453678d1186..de5812c362b5 100644 > --- a/drivers/gpu/drm/drm_atomic_helper.c > +++ b/drivers/gpu/drm/drm_atomic_helper.c > @@ -1608,15 +1608,6 @@ int drm_atomic_helper_async_check(struct drm_device *dev, > old_plane_state->crtc != new_plane_state->crtc) > return -EINVAL; > > - /* > - * FIXME: Since prepare_fb and cleanup_fb are always called on > - * the new_plane_state for async updates we need to block framebuffer > - * changes. This prevents use of a fb that's been cleaned up and > - * double cleanups from occuring. > - */ > - if (old_plane_state->fb != new_plane_state->fb) > - return -EINVAL; > - > funcs = plane->helper_private; > if (!funcs->atomic_async_update) > return -EINVAL; > @@ -1647,6 +1638,8 @@ EXPORT_SYMBOL(drm_atomic_helper_async_check); > * drm_atomic_async_check() succeeds. Async commits are not supposed to swap > * the states like normal sync commits, but just do in-place changes on the > * current state. > + * > + * TODO: Implement full swap instead of doing in-place changes. > */ > void drm_atomic_helper_async_commit(struct drm_device *dev, > struct drm_atomic_state *state) > @@ -1657,6 +1650,9 @@ void drm_atomic_helper_async_commit(struct drm_device *dev, > int i; > > for_each_new_plane_in_state(state, plane, plane_state, i) { > + struct drm_framebuffer *new_fb = plane_state->fb; > + struct drm_framebuffer *old_fb = plane->state->fb; > + > funcs = plane->helper_private; > funcs->atomic_async_update(plane, plane_state); > > @@ -1665,11 +1661,17 @@ void drm_atomic_helper_async_commit(struct drm_device *dev, > * plane->state in-place, make sure at least common > * properties have been properly updated. > */ > - WARN_ON_ONCE(plane->state->fb != plane_state->fb); > + WARN_ON_ONCE(plane->state->fb != new_fb); > WARN_ON_ONCE(plane->state->crtc_x != plane_state->crtc_x); > WARN_ON_ONCE(plane->state->crtc_y != plane_state->crtc_y); > WARN_ON_ONCE(plane->state->src_x != plane_state->src_x); > WARN_ON_ONCE(plane->state->src_y != plane_state->src_y); > + > + /* > + * Make sure the FBs have been swapped so that cleanups in the > + * new_state performs a cleanup in the old FB. > + */ > + WARN_ON_ONCE(plane_state->fb != old_fb); > } > } > EXPORT_SYMBOL(drm_atomic_helper_async_commit); > diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h > index cfb7be40bed7..ce582e8e8f2f 100644 > --- a/include/drm/drm_modeset_helper_vtables.h > +++ b/include/drm/drm_modeset_helper_vtables.h > @@ -1174,6 +1174,11 @@ struct drm_plane_helper_funcs { > * current one with the new plane configurations in the new > * plane_state. > * > + * Drivers should also swap the framebuffers between plane state Perhaps add "current" before plane state and then after add "(&drm_plane.state)" so it's more clear what you're referring to here? > + * and new_state. This is required because prepare and cleanup calls > + * are performed on the new_state object, then to cleanup the old > + * framebuffer, it needs to be placed inside the new_state object. I'd change this bit to: * This is required since cleanup for async commits is performed on * the new state, rather than old state like for traditional commits. * Since we want to give up the reference on the current (old) fb instead * of our brand new one, swap them in the driver during the async commit. > + * > * FIXME: > * - It only works for single plane updates > * - Async Pageflips are not supported yet > -- > 2.20.1 >
On 5/7/19 5:18 PM, Sean Paul wrote: > On Wed, Mar 13, 2019 at 09:20:26PM -0300, Helen Koike wrote: >> In the case of a normal sync update, the preparation of framebuffers (be >> it calling drm_atomic_helper_prepare_planes() or doing setups with >> drm_framebuffer_get()) are performed in the new_state and the respective >> cleanups are performed in the old_state. >> >> In the case of async updates, the preparation is also done in the >> new_state but the cleanups are done in the new_state (because updates >> are performed in place, i.e. in the current state). >> >> The current code blocks async udpates when the fb is changed, turning >> async updates into sync updates, slowing down cursor updates and >> introducing regressions in igt tests with errors of type: >> >> "CRITICAL: completed 97 cursor updated in a period of 30 flips, we >> expect to complete approximately 15360 updates, with the threshold set >> at 7680" >> >> Fb changes in async updates were prevented to avoid the following scenario: >> >> - Async update, oldfb = NULL, newfb = fb1, prepare fb1, cleanup fb1 >> - Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb2 >> - Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2 (wrong) >> Where we have a single call to prepare fb2 but double cleanup call to fb2. >> >> To solve the above problems, instead of blocking async fb changes, we >> place the old framebuffer in the new_state object, so when the code >> performs cleanups in the new_state it will cleanup the old_fb and we >> will have the following scenario instead: >> >> - Async update, oldfb = NULL, newfb = fb1, prepare fb1, no cleanup >> - Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb1 >> - Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2 >> >> Where calls to prepare/cleanup are balanced. >> >> Cc: <stable@vger.kernel.org> # v4.14+ > > I'm not convinced this should be cc: stable, seems more in the improvement > category than a bug fix. I'm cc'ing to stable because the commit mentioned below inserted a regression regarding the speed that cursors can be updated. > >> Fixes: 25dc194b34dd ("drm: Block fb changes for async plane updates") >> Suggested-by: Boris Brezillon <boris.brezillon@collabora.com> >> Signed-off-by: Helen Koike <helen.koike@collabora.com> >> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> >> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> >> >> --- >> Hello, >> >> I added a TODO in drm_atomic_helper_async_commit() regarding doing a >> full state swap(), Boris and Nicholas, let me know if this is ok and if >> I can keep your Reviewed-by tags) >> >> As mentioned in the cover letter, I tested in almost all platforms with >> igt plane_cursor_legacy and kms_cursor_legacy and I didn't see any >> regressions. But I couldn't test on MSM and AMD because I don't have >> the hardware I would appreciate if anyone could help me testing those. >> >> Thanks! >> Helen >> >> Changes in v3: >> - Add Reviewed-by tags >> - Add TODO in drm_atomic_helper_async_commit() >> >> Changes in v2: >> - Change the order of the patch in the series, add this as the last one. >> - Add documentation >> - s/ballanced/balanced >> >> drivers/gpu/drm/drm_atomic_helper.c | 22 ++++++++++++---------- >> include/drm/drm_modeset_helper_vtables.h | 5 +++++ >> 2 files changed, 17 insertions(+), 10 deletions(-) >> >> diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c >> index 2453678d1186..de5812c362b5 100644 >> --- a/drivers/gpu/drm/drm_atomic_helper.c >> +++ b/drivers/gpu/drm/drm_atomic_helper.c >> @@ -1608,15 +1608,6 @@ int drm_atomic_helper_async_check(struct drm_device *dev, >> old_plane_state->crtc != new_plane_state->crtc) >> return -EINVAL; >> >> - /* >> - * FIXME: Since prepare_fb and cleanup_fb are always called on >> - * the new_plane_state for async updates we need to block framebuffer >> - * changes. This prevents use of a fb that's been cleaned up and >> - * double cleanups from occuring. >> - */ >> - if (old_plane_state->fb != new_plane_state->fb) >> - return -EINVAL; >> - >> funcs = plane->helper_private; >> if (!funcs->atomic_async_update) >> return -EINVAL; >> @@ -1647,6 +1638,8 @@ EXPORT_SYMBOL(drm_atomic_helper_async_check); >> * drm_atomic_async_check() succeeds. Async commits are not supposed to swap >> * the states like normal sync commits, but just do in-place changes on the >> * current state. >> + * >> + * TODO: Implement full swap instead of doing in-place changes. >> */ >> void drm_atomic_helper_async_commit(struct drm_device *dev, >> struct drm_atomic_state *state) >> @@ -1657,6 +1650,9 @@ void drm_atomic_helper_async_commit(struct drm_device *dev, >> int i; >> >> for_each_new_plane_in_state(state, plane, plane_state, i) { >> + struct drm_framebuffer *new_fb = plane_state->fb; >> + struct drm_framebuffer *old_fb = plane->state->fb; >> + >> funcs = plane->helper_private; >> funcs->atomic_async_update(plane, plane_state); >> >> @@ -1665,11 +1661,17 @@ void drm_atomic_helper_async_commit(struct drm_device *dev, >> * plane->state in-place, make sure at least common >> * properties have been properly updated. >> */ >> - WARN_ON_ONCE(plane->state->fb != plane_state->fb); >> + WARN_ON_ONCE(plane->state->fb != new_fb); >> WARN_ON_ONCE(plane->state->crtc_x != plane_state->crtc_x); >> WARN_ON_ONCE(plane->state->crtc_y != plane_state->crtc_y); >> WARN_ON_ONCE(plane->state->src_x != plane_state->src_x); >> WARN_ON_ONCE(plane->state->src_y != plane_state->src_y); >> + >> + /* >> + * Make sure the FBs have been swapped so that cleanups in the >> + * new_state performs a cleanup in the old FB. >> + */ >> + WARN_ON_ONCE(plane_state->fb != old_fb); >> } >> } >> EXPORT_SYMBOL(drm_atomic_helper_async_commit); >> diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h >> index cfb7be40bed7..ce582e8e8f2f 100644 >> --- a/include/drm/drm_modeset_helper_vtables.h >> +++ b/include/drm/drm_modeset_helper_vtables.h >> @@ -1174,6 +1174,11 @@ struct drm_plane_helper_funcs { >> * current one with the new plane configurations in the new >> * plane_state. >> * >> + * Drivers should also swap the framebuffers between plane state > > Perhaps add "current" before plane state and then after add "(&drm_plane.state)" > so it's more clear what you're referring to here? > >> + * and new_state. This is required because prepare and cleanup calls >> + * are performed on the new_state object, then to cleanup the old >> + * framebuffer, it needs to be placed inside the new_state object. > > I'd change this bit to: > > * This is required since cleanup for async commits is performed on > * the new state, rather than old state like for traditional commits. > * Since we want to give up the reference on the current (old) fb instead > * of our brand new one, swap them in the driver during the async commit. > >> + * >> * FIXME: >> * - It only works for single plane updates >> * - Async Pageflips are not supported yet >> -- >> 2.20.1 >> > Thanks, I'm sending this update in v4. Helen
diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index 2453678d1186..de5812c362b5 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -1608,15 +1608,6 @@ int drm_atomic_helper_async_check(struct drm_device *dev, old_plane_state->crtc != new_plane_state->crtc) return -EINVAL; - /* - * FIXME: Since prepare_fb and cleanup_fb are always called on - * the new_plane_state for async updates we need to block framebuffer - * changes. This prevents use of a fb that's been cleaned up and - * double cleanups from occuring. - */ - if (old_plane_state->fb != new_plane_state->fb) - return -EINVAL; - funcs = plane->helper_private; if (!funcs->atomic_async_update) return -EINVAL; @@ -1647,6 +1638,8 @@ EXPORT_SYMBOL(drm_atomic_helper_async_check); * drm_atomic_async_check() succeeds. Async commits are not supposed to swap * the states like normal sync commits, but just do in-place changes on the * current state. + * + * TODO: Implement full swap instead of doing in-place changes. */ void drm_atomic_helper_async_commit(struct drm_device *dev, struct drm_atomic_state *state) @@ -1657,6 +1650,9 @@ void drm_atomic_helper_async_commit(struct drm_device *dev, int i; for_each_new_plane_in_state(state, plane, plane_state, i) { + struct drm_framebuffer *new_fb = plane_state->fb; + struct drm_framebuffer *old_fb = plane->state->fb; + funcs = plane->helper_private; funcs->atomic_async_update(plane, plane_state); @@ -1665,11 +1661,17 @@ void drm_atomic_helper_async_commit(struct drm_device *dev, * plane->state in-place, make sure at least common * properties have been properly updated. */ - WARN_ON_ONCE(plane->state->fb != plane_state->fb); + WARN_ON_ONCE(plane->state->fb != new_fb); WARN_ON_ONCE(plane->state->crtc_x != plane_state->crtc_x); WARN_ON_ONCE(plane->state->crtc_y != plane_state->crtc_y); WARN_ON_ONCE(plane->state->src_x != plane_state->src_x); WARN_ON_ONCE(plane->state->src_y != plane_state->src_y); + + /* + * Make sure the FBs have been swapped so that cleanups in the + * new_state performs a cleanup in the old FB. + */ + WARN_ON_ONCE(plane_state->fb != old_fb); } } EXPORT_SYMBOL(drm_atomic_helper_async_commit); diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h index cfb7be40bed7..ce582e8e8f2f 100644 --- a/include/drm/drm_modeset_helper_vtables.h +++ b/include/drm/drm_modeset_helper_vtables.h @@ -1174,6 +1174,11 @@ struct drm_plane_helper_funcs { * current one with the new plane configurations in the new * plane_state. * + * Drivers should also swap the framebuffers between plane state + * and new_state. This is required because prepare and cleanup calls + * are performed on the new_state object, then to cleanup the old + * framebuffer, it needs to be placed inside the new_state object. + * * FIXME: * - It only works for single plane updates * - Async Pageflips are not supported yet
In the case of a normal sync update, the preparation of framebuffers (be it calling drm_atomic_helper_prepare_planes() or doing setups with drm_framebuffer_get()) are performed in the new_state and the respective cleanups are performed in the old_state. In the case of async updates, the preparation is also done in the new_state but the cleanups are done in the new_state (because updates are performed in place, i.e. in the current state). The current code blocks async udpates when the fb is changed, turning async updates into sync updates, slowing down cursor updates and introducing regressions in igt tests with errors of type: "CRITICAL: completed 97 cursor updated in a period of 30 flips, we expect to complete approximately 15360 updates, with the threshold set at 7680" Fb changes in async updates were prevented to avoid the following scenario: - Async update, oldfb = NULL, newfb = fb1, prepare fb1, cleanup fb1 - Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb2 - Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2 (wrong) Where we have a single call to prepare fb2 but double cleanup call to fb2. To solve the above problems, instead of blocking async fb changes, we place the old framebuffer in the new_state object, so when the code performs cleanups in the new_state it will cleanup the old_fb and we will have the following scenario instead: - Async update, oldfb = NULL, newfb = fb1, prepare fb1, no cleanup - Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb1 - Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2 Where calls to prepare/cleanup are balanced. Cc: <stable@vger.kernel.org> # v4.14+ Fixes: 25dc194b34dd ("drm: Block fb changes for async plane updates") Suggested-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Helen Koike <helen.koike@collabora.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> --- Hello, I added a TODO in drm_atomic_helper_async_commit() regarding doing a full state swap(), Boris and Nicholas, let me know if this is ok and if I can keep your Reviewed-by tags) As mentioned in the cover letter, I tested in almost all platforms with igt plane_cursor_legacy and kms_cursor_legacy and I didn't see any regressions. But I couldn't test on MSM and AMD because I don't have the hardware I would appreciate if anyone could help me testing those. Thanks! Helen Changes in v3: - Add Reviewed-by tags - Add TODO in drm_atomic_helper_async_commit() Changes in v2: - Change the order of the patch in the series, add this as the last one. - Add documentation - s/ballanced/balanced drivers/gpu/drm/drm_atomic_helper.c | 22 ++++++++++++---------- include/drm/drm_modeset_helper_vtables.h | 5 +++++ 2 files changed, 17 insertions(+), 10 deletions(-)