| Message ID | 20190616132930.6942-6-masneyb@onstation.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | qcom: add OCMEM support | expand |
On Sun 16 Jun 06:29 PDT 2019, Brian Masney wrote: > From: Rob Clark <robdclark@gmail.com> > > The OCMEM driver handles allocation and configuration of the On Chip > MEMory that is present on some Snapdragon SoCs. > > Devices which have OCMEM do not have GMEM inside the GPU core, so the > GPU must instead use OCMEM to be functional. Since currently the GPU > is the only OCMEM user with an upstream driver, this is just a minimal > implementation sufficient for statically allocating to the GPU it's > chunk of OCMEM. > > Signed-off-by: Rob Clark <robdclark@gmail.com> > Co-developed-by: Brian Masney <masneyb@onstation.org> > Signed-off-by: Brian Masney <masneyb@onstation.org> > --- > Changes since Rob's last version of this patch: > https://patchwork.kernel.org/patch/7379801/ > - reformatted driver to allow multiple instances > - updated logging of error paths during device probing > - remove unused psgsc_ctrl > - remove _clk from clock names > - propagate error code from devm_ioremap_resource() > - use device_get_match_data() > - SPDX license tags > - remove QCOM_SMD in Kconfig > - select ARCH_QCOM in Kconfig > - select QCOM_SCM in Kconfig > - longer description in Kconfig > > drivers/soc/qcom/Kconfig | 10 + > drivers/soc/qcom/Makefile | 1 + > drivers/soc/qcom/ocmem.c | 402 +++++++++++++++++++++++++++++++++++ > drivers/soc/qcom/ocmem.xml.h | 86 ++++++++ > include/soc/qcom/ocmem.h | 34 +++ > 5 files changed, 533 insertions(+) > create mode 100644 drivers/soc/qcom/ocmem.c > create mode 100644 drivers/soc/qcom/ocmem.xml.h > create mode 100644 include/soc/qcom/ocmem.h > > diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig > index 880cf0290962..998d94d60a3c 100644 > --- a/drivers/soc/qcom/Kconfig > +++ b/drivers/soc/qcom/Kconfig > @@ -62,6 +62,16 @@ config QCOM_MDT_LOADER > tristate > select QCOM_SCM > > +config QCOM_OCMEM > + tristate "Qualcomm On Chip Memory (OCMEM) driver" > + depends on ARCH_QCOM > + select QCOM_SCM > + help > + The On Chip Memory (OCMEM) allocator allows various clients to > + allocate memory from OCMEM based on performance, latency and power > + requirements. This is typically used by the GPU, camera/video, and > + audio components on some Snapdragon SoCs. > + > config QCOM_PM > bool "Qualcomm Power Management" > depends on ARCH_QCOM && !ARM64 > diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile > index ffe519b0cb66..76ac469f548c 100644 > --- a/drivers/soc/qcom/Makefile > +++ b/drivers/soc/qcom/Makefile > @@ -5,6 +5,7 @@ obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o > obj-$(CONFIG_QCOM_GLINK_SSR) += glink_ssr.o > obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o > obj-$(CONFIG_QCOM_MDT_LOADER) += mdt_loader.o > +obj-$(CONFIG_QCOM_OCMEM) += ocmem.o > obj-$(CONFIG_QCOM_PM) += spm.o > obj-$(CONFIG_QCOM_QMI_HELPERS) += qmi_helpers.o > qmi_helpers-y += qmi_encdec.o qmi_interface.o > diff --git a/drivers/soc/qcom/ocmem.c b/drivers/soc/qcom/ocmem.c > new file mode 100644 > index 000000000000..5ebf5031b6c5 > --- /dev/null > +++ b/drivers/soc/qcom/ocmem.c > @@ -0,0 +1,402 @@ > +// SPDX-License-Identifier: GPL-2.0-only > +/* > + * Copyright (C) 2019 Brian Masney <masneyb@onstation.org> > + * Copyright (C) 2015 Red Hat. Author: Rob Clark <robdclark@gmail.com> > + */ > + > +#include <linux/clk.h> > +#include <linux/io.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/of_device.h> > +#include <linux/platform_device.h> > +#include <linux/qcom_scm.h> > +#include <linux/sizes.h> > +#include <linux/slab.h> > +#include <linux/types.h> > + > +#include <soc/qcom/ocmem.h> > +#include "ocmem.xml.h" > + > +enum region_mode { > + WIDE_MODE = 0x0, > + THIN_MODE, > + MODE_DEFAULT = WIDE_MODE, > +}; > + > +struct ocmem_region { > + bool interleaved; > + enum region_mode mode; > + unsigned int num_macros; > + enum ocmem_macro_state macro_state[4]; > + unsigned long macro_size; > + unsigned long region_size; > +}; > + > +struct ocmem_config { > + uint8_t num_regions; > + uint32_t macro_size; > +}; > + > +struct ocmem { > + struct device *dev; > + const struct ocmem_config *config; > + struct resource *ocmem_mem; > + struct clk *core_clk; > + struct clk *iface_clk; > + void __iomem *mmio; > + unsigned int num_ports; > + unsigned int num_macros; > + bool interleaved; > + struct ocmem_region *regions; > +}; > + > +#define FIELD(val, name) (((val) & name ## __MASK) >> name ## __SHIFT) include/linux/bitfield.h has standard macros for this, please use that instead. > + > +static inline void ocmem_write(struct ocmem *ocmem, u32 reg, u32 data) > +{ > + writel(data, ocmem->mmio + reg); > +} > + > +static inline u32 ocmem_read(struct ocmem *ocmem, u32 reg) > +{ > + return readl(ocmem->mmio + reg); > +} > + > +static int ocmem_clk_enable(struct ocmem *ocmem) > +{ > + int ret; > + > + ret = clk_prepare_enable(ocmem->core_clk); Use clk_bulk_* instead, it will reduce the amount of duplication in the three places you poke at your clocks. And with that I would suggest that you just inline these into probe and remove. > + if (ret) { > + dev_info(ocmem->dev, "Fail to enable core clk\n"); > + return ret; > + } > + > + ret = clk_prepare_enable(ocmem->iface_clk); > + if (ret) { > + dev_info(ocmem->dev, "Fail to enable iface clk\n"); > + return ret; > + } > + > + return 0; > +} > + > +static void ocmem_clk_disable(struct ocmem *ocmem) > +{ > + clk_disable_unprepare(ocmem->iface_clk); > + clk_disable_unprepare(ocmem->core_clk); > +} > + > +static int ocmem_dev_remove(struct platform_device *pdev) Please move this below probe(). > +{ > + struct ocmem *ocmem = platform_get_drvdata(pdev); > + > + ocmem_clk_disable(ocmem); > + > + return 0; > +} > + > +static void update_ocmem(struct ocmem *ocmem) > +{ > + uint32_t region_mode_ctrl = 0x0; > + unsigned int pos = 0, i = 0; Both pos and i are initialized before use, no need to do it here. > + > + if (!qcom_scm_ocmem_lock_available()) { > + for (i = 0; i < ocmem->config->num_regions; i++) { > + struct ocmem_region *region = &ocmem->regions[i]; > + > + pos = i << 2; Just use i * 4 in the BIT() operation below. But the generated macros has the "thin bits" as 1, 2, 4, 8; so shouldn't this be BIT(i)? > + if (region->mode == THIN_MODE) > + region_mode_ctrl |= BIT(pos); > + } > + > + dev_dbg(ocmem->dev, "ocmem_region_mode_control %x\n", > + region_mode_ctrl); > + ocmem_write(ocmem, REG_OCMEM_REGION_MODE_CTL, region_mode_ctrl); > + } > + > + for (i = 0; i < ocmem->config->num_regions; i++) { > + struct ocmem_region *region = &ocmem->regions[i]; > + u32 data; > + > + data = OCMEM_PSGSC_CTL_MACRO0_MODE(region->macro_state[0]) | > + OCMEM_PSGSC_CTL_MACRO1_MODE(region->macro_state[1]) | > + OCMEM_PSGSC_CTL_MACRO2_MODE(region->macro_state[2]) | > + OCMEM_PSGSC_CTL_MACRO3_MODE(region->macro_state[3]); > + > + ocmem_write(ocmem, REG_OCMEM_PSGSC_CTL(i), data); > + } > +} > + > +static unsigned long phys_to_offset(struct ocmem *ocmem, > + unsigned long addr) > +{ > + if (addr < ocmem->ocmem_mem->start || addr >= ocmem->ocmem_mem->end) > + return 0; > + > + return addr - ocmem->ocmem_mem->start; > +} > + > +static unsigned long device_address(struct ocmem *ocmem, > + enum ocmem_client client, > + unsigned long addr) > +{ > + /* TODO, gpu uses phys_to_offset, but others do not.. */ Perhaps WARN_ON(client != OCMEM_GRAPHICS) as well? > + return phys_to_offset(ocmem, addr); > +} > + > +static void update_range(struct ocmem *ocmem, struct ocmem_buf *buf, > + enum ocmem_macro_state mstate, enum region_mode rmode) > +{ > + unsigned long offset = 0; > + int i, j; > + > + /* > + * TODO probably should assert somewhere that range is aligned > + * to macro boundaries.. > + */ > + > + for (i = 0; i < ocmem->config->num_regions; i++) { > + struct ocmem_region *region = &ocmem->regions[i]; > + > + if (buf->offset <= offset && offset < buf->offset + buf->len) > + region->mode = rmode; > + > + for (j = 0; j < region->num_macros; j++) { > + if (buf->offset <= offset && > + offset < buf->offset + buf->len) > + region->macro_state[j] = mstate; > + > + offset += region->macro_size; > + } > + } > + > + update_ocmem(ocmem); > +} > + > +struct ocmem *of_get_ocmem(struct device *dev) > +{ > + struct platform_device *pdev; > + struct device_node *devnode; > + > + devnode = of_parse_phandle(dev->of_node, "ocmem", 0); > + if (!devnode) { > + dev_err(dev, "Cannot look up ocmem phandle\n"); > + return NULL; return ERR_PTR(-EINVAL); > + } > + > + pdev = of_find_device_by_node(devnode); > + if (!pdev) { > + dev_err(dev, "Cannot find device node %s\n", devnode->name); > + return NULL; return ERR_PTR(-EPROBE_DEFER) > + } > + > + return platform_get_drvdata(pdev); > +} > +EXPORT_SYMBOL(of_get_ocmem); > + > +struct ocmem_buf *ocmem_allocate(struct ocmem *ocmem, enum ocmem_client client, > + unsigned long size) > +{ > + struct ocmem_buf *buf; > + > + buf = kzalloc(sizeof(*buf), GFP_KERNEL); > + if (!buf) > + return ERR_PTR(-ENOMEM); > + This is a very simple allocator... It would be nice to add the minimal functionality of making sure that you only return successfully if there's not already a live allocation. But at least you should add a comment here stating the "limitation" on the algorithm. > + buf->offset = 0; > + buf->addr = device_address(ocmem, client, buf->offset); > + buf->len = size; > + > + update_range(ocmem, buf, CORE_ON, WIDE_MODE); > + > + if (qcom_scm_ocmem_lock_available()) { > + int ret; > + > + ret = qcom_scm_ocmem_lock(QCOM_SCM_OCMEM_GRAPHICS_ID, > + buf->offset, buf->len, WIDE_MODE); > + if (ret) > + dev_err(ocmem->dev, "could not lock: %d\n", ret); > + } else { > + if (client == OCMEM_GRAPHICS) { Isn't the lock_available case also graphcis only? Perhaps it's worth swapping the inner and outer blocks. > + ocmem_write(ocmem, REG_OCMEM_GFX_MPU_START, > + buf->offset); > + ocmem_write(ocmem, REG_OCMEM_GFX_MPU_END, > + buf->offset + buf->len); > + } And it's probably good to warn and fail if the client isn't graphics. > + } > + > + return buf; > +} > +EXPORT_SYMBOL(ocmem_allocate); > + > +void ocmem_free(struct ocmem *ocmem, enum ocmem_client client, > + struct ocmem_buf *buf) > +{ > + update_range(ocmem, buf, CLK_OFF, MODE_DEFAULT); > + > + if (qcom_scm_ocmem_lock_available()) { > + int ret; > + > + ret = qcom_scm_ocmem_unlock(QCOM_SCM_OCMEM_GRAPHICS_ID, > + buf->offset, buf->len); > + if (ret) > + dev_err(ocmem->dev, "could not unlock: %d\n", ret); > + } else { > + if (client == OCMEM_GRAPHICS) { > + ocmem_write(ocmem, REG_OCMEM_GFX_MPU_START, 0x0); > + ocmem_write(ocmem, REG_OCMEM_GFX_MPU_END, 0x0); > + } > + } > + > + kfree(buf); > +} > +EXPORT_SYMBOL(ocmem_free); > + > +static int ocmem_dev_probe(struct platform_device *pdev) > +{ > + struct ocmem *ocmem; > + uint32_t reg, num_banks, region_size; > + struct device *dev = &pdev->dev; > + struct resource *res; > + int i, j, ret; > + > + if (!qcom_scm_is_available()) > + return -EPROBE_DEFER; > + > + ocmem = devm_kzalloc(dev, sizeof(*ocmem), GFP_KERNEL); > + if (!ocmem) > + return -ENOMEM; > + > + ocmem->dev = dev; > + ocmem->config = device_get_match_data(dev); > + > + ocmem->core_clk = devm_clk_get(dev, "core"); devm_clk_bulk_get() > + if (IS_ERR(ocmem->core_clk)) { > + if (PTR_ERR(ocmem->core_clk) != -EPROBE_DEFER) > + dev_err(dev, "Unable to get the core clock\n"); > + > + return PTR_ERR(ocmem->core_clk); > + } > + > + ocmem->iface_clk = devm_clk_get(dev, "iface"); > + if (IS_ERR(ocmem->iface_clk)) { > + if (PTR_ERR(ocmem->iface_clk) != -EPROBE_DEFER) > + dev_err(dev, "Unable to get the iface clock\n"); > + > + return PTR_ERR(ocmem->iface_clk); > + } > + > + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, > + "ocmem_ctrl_physical"); We know it's the "_physical", so drop that from the name. > + if (!res) { It's idiomatic to ignore this check and rely on ioremap_resource() to fail gracefully if passed NULL. > + dev_err(dev, "Could not get ocmem_ctrl_physical region\n"); > + return -ENXIO; > + } > + > + ocmem->mmio = devm_ioremap_resource(&pdev->dev, res); > + if (IS_ERR(ocmem->mmio)) { > + dev_err(&pdev->dev, > + "Failed to ioremap ocmem_ctrl_physical resource\n"); > + return PTR_ERR(ocmem->mmio); > + } > + > + ocmem->ocmem_mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, > + "ocmem_physical"); > + if (!ocmem->ocmem_mem) { > + dev_err(dev, "Could not get ocmem_physical region\n"); > + return -ENXIO; > + } > + > + /* The core clock is synchronous with graphics */ > + WARN_ON(clk_set_rate(ocmem->core_clk, 1000) < 0); > + > + ret = ocmem_clk_enable(ocmem); > + if (ret) > + return ret; > + > + if (qcom_scm_restore_sec_config_available()) { > + dev_dbg(dev, "configuring scm\n"); > + ret = qcom_scm_restore_sec_config(&pdev->dev, > + QCOM_SCM_OCMEM_DEV_ID); > + if (ret) { > + dev_err(dev, "Could not enable secure configuration\n"); > + goto err_clk_disable; > + } > + } > + > + reg = ocmem_read(ocmem, REG_OCMEM_HW_PROFILE); > + ocmem->num_ports = FIELD(reg, OCMEM_HW_PROFILE_NUM_PORTS); > + ocmem->num_macros = FIELD(reg, OCMEM_HW_PROFILE_NUM_MACROS); > + ocmem->interleaved = !!(reg & OCMEM_HW_PROFILE_INTERLEAVING); > + > + num_banks = ocmem->num_ports / 2; > + region_size = ocmem->config->macro_size * num_banks; > + > + dev_info(dev, "%u ports, %u regions, %u macros, %sinterleaved\n", > + ocmem->num_ports, ocmem->config->num_regions, > + ocmem->num_macros, ocmem->interleaved ? "" : "not "); > + > + ocmem->regions = devm_kcalloc(dev, ocmem->config->num_regions, > + sizeof(struct ocmem_region), GFP_KERNEL); > + if (!ocmem->regions) { > + ret = -ENOMEM; > + goto err_clk_disable; > + } > + > + for (i = 0; i < ocmem->config->num_regions; i++) { > + struct ocmem_region *region = &ocmem->regions[i]; > + > + if (WARN_ON(num_banks > ARRAY_SIZE(region->macro_state))) { > + ret = -EINVAL; > + goto err_clk_disable; > + } > + > + region->mode = MODE_DEFAULT; > + region->num_macros = num_banks; > + > + if (i == (ocmem->config->num_regions - 1) && > + reg & OCMEM_HW_PROFILE_LAST_REGN_HALFSIZE) { > + region->macro_size = ocmem->config->macro_size / 2; > + region->region_size = region_size / 2; > + } else { > + region->macro_size = ocmem->config->macro_size; > + region->region_size = region_size; > + } > + > + for (j = 0; j < ARRAY_SIZE(region->macro_state); j++) > + region->macro_state[j] = CLK_OFF; > + } > + > + platform_set_drvdata(pdev, ocmem); > + > + return 0; > + > +err_clk_disable: > + ocmem_clk_disable(ocmem); > + return ret; > +} > + > +static const struct ocmem_config ocmem_8974_config = { > + .num_regions = 3, > + .macro_size = SZ_128K, > +}; > + > +static const struct of_device_id ocmem_of_match[] = { > + { .compatible = "qcom,ocmem-msm8974", .data = &ocmem_8974_config }, > + { } > +}; > + > +MODULE_DEVICE_TABLE(of, ocmem_of_match); > + > +static struct platform_driver ocmem_driver = { > + .probe = ocmem_dev_probe, > + .remove = ocmem_dev_remove, > + .driver = { > + .name = "ocmem", > + .of_match_table = ocmem_of_match, > + }, > +}; > + > +module_platform_driver(ocmem_driver); MODULE_LICENSE() > diff --git a/drivers/soc/qcom/ocmem.xml.h b/drivers/soc/qcom/ocmem.xml.h I would prefer that these lived at the top of the c file, rather than being generated. > new file mode 100644 > index 000000000000..b4bfb85d1e33 > --- /dev/null > +++ b/drivers/soc/qcom/ocmem.xml.h > @@ -0,0 +1,86 @@ > +/* SPDX-License-Identifier: MIT */ > + > +#ifndef OCMEM_XML > +#define OCMEM_XML > + > +/* Autogenerated file, DO NOT EDIT manually! > + > +This file was generated by the rules-ng-ng headergen tool in this git repository: > +http://github.com/freedreno/envytools/ > +git clone https://github.com/freedreno/envytools.git > + > +The rules-ng-ng source files this header was generated from are: > +- /home/robclark/src/freedreno/envytools/rnndb/adreno/ocmem.xml ( 1773 bytes, from 2015-09-24 17:30:00) > + > +Copyright (C) 2013-2015 by the following authors: > +- Rob Clark <robdclark@gmail.com> (robclark) > +*/ > + > +enum ocmem_macro_state { > + PASSTHROUGH = 0, > + PERI_ON = 1, > + CORE_ON = 2, > + CLK_OFF = 4, > +}; > + > +#define REG_OCMEM_HW_VERSION 0x00000000 > + > +#define REG_OCMEM_HW_PROFILE 0x00000004 > +#define OCMEM_HW_PROFILE_NUM_PORTS__MASK 0x0000000f > +#define OCMEM_HW_PROFILE_NUM_PORTS__SHIFT 0 > +static inline uint32_t OCMEM_HW_PROFILE_NUM_PORTS(uint32_t val) > +{ > + return ((val) << OCMEM_HW_PROFILE_NUM_PORTS__SHIFT) & OCMEM_HW_PROFILE_NUM_PORTS__MASK; > +} > +#define OCMEM_HW_PROFILE_NUM_MACROS__MASK 0x00003f00 > +#define OCMEM_HW_PROFILE_NUM_MACROS__SHIFT 8 > +static inline uint32_t OCMEM_HW_PROFILE_NUM_MACROS(uint32_t val) > +{ > + return ((val) << OCMEM_HW_PROFILE_NUM_MACROS__SHIFT) & OCMEM_HW_PROFILE_NUM_MACROS__MASK; > +} > +#define OCMEM_HW_PROFILE_LAST_REGN_HALFSIZE 0x00010000 > +#define OCMEM_HW_PROFILE_INTERLEAVING 0x00020000 > + > +#define REG_OCMEM_GEN_STATUS 0x0000000c > + > +#define REG_OCMEM_PSGSC_STATUS 0x00000038 > + > +static inline uint32_t REG_OCMEM_PSGSC(uint32_t i0) { return 0x0000003c + 0x1*i0; } > + > +static inline uint32_t REG_OCMEM_PSGSC_CTL(uint32_t i0) { return 0x0000003c + 0x1*i0; } > +#define OCMEM_PSGSC_CTL_MACRO0_MODE__MASK 0x00000007 > +#define OCMEM_PSGSC_CTL_MACRO0_MODE__SHIFT 0 > +static inline uint32_t OCMEM_PSGSC_CTL_MACRO0_MODE(enum ocmem_macro_state val) > +{ > + return ((val) << OCMEM_PSGSC_CTL_MACRO0_MODE__SHIFT) & OCMEM_PSGSC_CTL_MACRO0_MODE__MASK; > +} > +#define OCMEM_PSGSC_CTL_MACRO1_MODE__MASK 0x00000070 > +#define OCMEM_PSGSC_CTL_MACRO1_MODE__SHIFT 4 > +static inline uint32_t OCMEM_PSGSC_CTL_MACRO1_MODE(enum ocmem_macro_state val) > +{ > + return ((val) << OCMEM_PSGSC_CTL_MACRO1_MODE__SHIFT) & OCMEM_PSGSC_CTL_MACRO1_MODE__MASK; > +} > +#define OCMEM_PSGSC_CTL_MACRO2_MODE__MASK 0x00000700 > +#define OCMEM_PSGSC_CTL_MACRO2_MODE__SHIFT 8 > +static inline uint32_t OCMEM_PSGSC_CTL_MACRO2_MODE(enum ocmem_macro_state val) > +{ > + return ((val) << OCMEM_PSGSC_CTL_MACRO2_MODE__SHIFT) & OCMEM_PSGSC_CTL_MACRO2_MODE__MASK; > +} > +#define OCMEM_PSGSC_CTL_MACRO3_MODE__MASK 0x00007000 > +#define OCMEM_PSGSC_CTL_MACRO3_MODE__SHIFT 12 > +static inline uint32_t OCMEM_PSGSC_CTL_MACRO3_MODE(enum ocmem_macro_state val) > +{ > + return ((val) << OCMEM_PSGSC_CTL_MACRO3_MODE__SHIFT) & OCMEM_PSGSC_CTL_MACRO3_MODE__MASK; > +} > + > +#define REG_OCMEM_REGION_MODE_CTL 0x00001000 > +#define OCMEM_REGION_MODE_CTL_REG0_THIN 0x00000001 > +#define OCMEM_REGION_MODE_CTL_REG1_THIN 0x00000002 > +#define OCMEM_REGION_MODE_CTL_REG2_THIN 0x00000004 > +#define OCMEM_REGION_MODE_CTL_REG3_THIN 0x00000008 > + > +#define REG_OCMEM_GFX_MPU_START 0x00001004 > + > +#define REG_OCMEM_GFX_MPU_END 0x00001008 > + > +#endif /* OCMEM_XML */ > diff --git a/include/soc/qcom/ocmem.h b/include/soc/qcom/ocmem.h > new file mode 100644 > index 000000000000..e56ce220096d > --- /dev/null > +++ b/include/soc/qcom/ocmem.h > @@ -0,0 +1,34 @@ > +/* SPDX-License-Identifier: GPL-2.0-only */ > +/* > + * Copyright (C) 2015 Red Hat > + * Author: Rob Clark <robdclark@gmail.com> > + */ > + > +#ifndef __OCMEM_H__ > +#define __OCMEM_H__ > + > +enum ocmem_client { > + /* GMEM clients */ > + OCMEM_GRAPHICS = 0x0, > + /* > + * TODO add more once ocmem_allocate() is clever enough to > + * deal with multiple clients. > + */ > + OCMEM_CLIENT_MAX, > +}; > + > +struct ocmem; > + > +struct ocmem_buf { > + unsigned long offset; > + unsigned long addr; > + unsigned long len; > +}; > + > +struct ocmem *of_get_ocmem(struct device *dev); > +struct ocmem_buf *ocmem_allocate(struct ocmem *ocmem, enum ocmem_client client, > + unsigned long size); > +void ocmem_free(struct ocmem *ocmem, enum ocmem_client client, > + struct ocmem_buf *buf); > + > +#endif /* __OCMEM_H__ */ > -- Regards, Bjorn
Hi Rob Clark, On Sun, Jun 16, 2019 at 10:41:06AM -0700, Bjorn Andersson wrote: > > diff --git a/drivers/soc/qcom/ocmem.xml.h b/drivers/soc/qcom/ocmem.xml.h > > I would prefer that these lived at the top of the c file, rather than > being generated. I think it would be nice to make this change as well. Rob C: Your original file ocmem.xml.h was licensed under the MIT license. I just wanted confirmation from you that it's OK to put the contents of that file into ocmem.c which has the GPL 2.0 only SPDX license tag. This will relicense the work. I imagine it's not an issue but I just wanted to get confirmation so there is no ambiguity regarding the licensing in the future. Brian > > > new file mode 100644 > > index 000000000000..b4bfb85d1e33 > > --- /dev/null > > +++ b/drivers/soc/qcom/ocmem.xml.h > > @@ -0,0 +1,86 @@ > > +/* SPDX-License-Identifier: MIT */ > > + > > +#ifndef OCMEM_XML > > +#define OCMEM_XML > > + > > +/* Autogenerated file, DO NOT EDIT manually! > > + > > +This file was generated by the rules-ng-ng headergen tool in this git repository: > > +http://github.com/freedreno/envytools/ > > +git clone https://github.com/freedreno/envytools.git > > + > > +The rules-ng-ng source files this header was generated from are: > > +- /home/robclark/src/freedreno/envytools/rnndb/adreno/ocmem.xml ( 1773 bytes, from 2015-09-24 17:30:00) > > + > > +Copyright (C) 2013-2015 by the following authors: > > +- Rob Clark <robdclark@gmail.com> (robclark) > > +*/
On Mon, Jun 17, 2019 at 7:02 PM Brian Masney <masneyb@onstation.org> wrote: > > Hi Rob Clark, > > On Sun, Jun 16, 2019 at 10:41:06AM -0700, Bjorn Andersson wrote: > > > diff --git a/drivers/soc/qcom/ocmem.xml.h b/drivers/soc/qcom/ocmem.xml.h > > > > I would prefer that these lived at the top of the c file, rather than > > being generated. > > I think it would be nice to make this change as well. > > Rob C: Your original file ocmem.xml.h was licensed under the MIT > license. I just wanted confirmation from you that it's OK to put > the contents of that file into ocmem.c which has the GPL 2.0 only > SPDX license tag. This will relicense the work. I imagine it's not > an issue but I just wanted to get confirmation so there is no > ambiguity regarding the licensing in the future. fine by me.. I defaulted to generated headers since that is extremely useful for gpu side of things (and userspace stuff defaults to MIT), but probably overkill for ocmem which just has a handful of registers (and no need for decoding userspace blob cmdstream dumps) BR, -R > > Brian > > > > > > > new file mode 100644 > > > index 000000000000..b4bfb85d1e33 > > > --- /dev/null > > > +++ b/drivers/soc/qcom/ocmem.xml.h > > > @@ -0,0 +1,86 @@ > > > +/* SPDX-License-Identifier: MIT */ > > > + > > > +#ifndef OCMEM_XML > > > +#define OCMEM_XML > > > + > > > +/* Autogenerated file, DO NOT EDIT manually! > > > + > > > +This file was generated by the rules-ng-ng headergen tool in this git repository: > > > +http://github.com/freedreno/envytools/ > > > +git clone https://github.com/freedreno/envytools.git > > > + > > > +The rules-ng-ng source files this header was generated from are: > > > +- /home/robclark/src/freedreno/envytools/rnndb/adreno/ocmem.xml ( 1773 bytes, from 2015-09-24 17:30:00) > > > + > > > +Copyright (C) 2013-2015 by the following authors: > > > +- Rob Clark <robdclark@gmail.com> (robclark) > > > +*/
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig index 880cf0290962..998d94d60a3c 100644 --- a/drivers/soc/qcom/Kconfig +++ b/drivers/soc/qcom/Kconfig @@ -62,6 +62,16 @@ config QCOM_MDT_LOADER tristate select QCOM_SCM +config QCOM_OCMEM + tristate "Qualcomm On Chip Memory (OCMEM) driver" + depends on ARCH_QCOM + select QCOM_SCM + help + The On Chip Memory (OCMEM) allocator allows various clients to + allocate memory from OCMEM based on performance, latency and power + requirements. This is typically used by the GPU, camera/video, and + audio components on some Snapdragon SoCs. + config QCOM_PM bool "Qualcomm Power Management" depends on ARCH_QCOM && !ARM64 diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile index ffe519b0cb66..76ac469f548c 100644 --- a/drivers/soc/qcom/Makefile +++ b/drivers/soc/qcom/Makefile @@ -5,6 +5,7 @@ obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o obj-$(CONFIG_QCOM_GLINK_SSR) += glink_ssr.o obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o obj-$(CONFIG_QCOM_MDT_LOADER) += mdt_loader.o +obj-$(CONFIG_QCOM_OCMEM) += ocmem.o obj-$(CONFIG_QCOM_PM) += spm.o obj-$(CONFIG_QCOM_QMI_HELPERS) += qmi_helpers.o qmi_helpers-y += qmi_encdec.o qmi_interface.o diff --git a/drivers/soc/qcom/ocmem.c b/drivers/soc/qcom/ocmem.c new file mode 100644 index 000000000000..5ebf5031b6c5 --- /dev/null +++ b/drivers/soc/qcom/ocmem.c @@ -0,0 +1,402 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2019 Brian Masney <masneyb@onstation.org> + * Copyright (C) 2015 Red Hat. Author: Rob Clark <robdclark@gmail.com> + */ + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/qcom_scm.h> +#include <linux/sizes.h> +#include <linux/slab.h> +#include <linux/types.h> + +#include <soc/qcom/ocmem.h> +#include "ocmem.xml.h" + +enum region_mode { + WIDE_MODE = 0x0, + THIN_MODE, + MODE_DEFAULT = WIDE_MODE, +}; + +struct ocmem_region { + bool interleaved; + enum region_mode mode; + unsigned int num_macros; + enum ocmem_macro_state macro_state[4]; + unsigned long macro_size; + unsigned long region_size; +}; + +struct ocmem_config { + uint8_t num_regions; + uint32_t macro_size; +}; + +struct ocmem { + struct device *dev; + const struct ocmem_config *config; + struct resource *ocmem_mem; + struct clk *core_clk; + struct clk *iface_clk; + void __iomem *mmio; + unsigned int num_ports; + unsigned int num_macros; + bool interleaved; + struct ocmem_region *regions; +}; + +#define FIELD(val, name) (((val) & name ## __MASK) >> name ## __SHIFT) + +static inline void ocmem_write(struct ocmem *ocmem, u32 reg, u32 data) +{ + writel(data, ocmem->mmio + reg); +} + +static inline u32 ocmem_read(struct ocmem *ocmem, u32 reg) +{ + return readl(ocmem->mmio + reg); +} + +static int ocmem_clk_enable(struct ocmem *ocmem) +{ + int ret; + + ret = clk_prepare_enable(ocmem->core_clk); + if (ret) { + dev_info(ocmem->dev, "Fail to enable core clk\n"); + return ret; + } + + ret = clk_prepare_enable(ocmem->iface_clk); + if (ret) { + dev_info(ocmem->dev, "Fail to enable iface clk\n"); + return ret; + } + + return 0; +} + +static void ocmem_clk_disable(struct ocmem *ocmem) +{ + clk_disable_unprepare(ocmem->iface_clk); + clk_disable_unprepare(ocmem->core_clk); +} + +static int ocmem_dev_remove(struct platform_device *pdev) +{ + struct ocmem *ocmem = platform_get_drvdata(pdev); + + ocmem_clk_disable(ocmem); + + return 0; +} + +static void update_ocmem(struct ocmem *ocmem) +{ + uint32_t region_mode_ctrl = 0x0; + unsigned int pos = 0, i = 0; + + if (!qcom_scm_ocmem_lock_available()) { + for (i = 0; i < ocmem->config->num_regions; i++) { + struct ocmem_region *region = &ocmem->regions[i]; + + pos = i << 2; + if (region->mode == THIN_MODE) + region_mode_ctrl |= BIT(pos); + } + + dev_dbg(ocmem->dev, "ocmem_region_mode_control %x\n", + region_mode_ctrl); + ocmem_write(ocmem, REG_OCMEM_REGION_MODE_CTL, region_mode_ctrl); + } + + for (i = 0; i < ocmem->config->num_regions; i++) { + struct ocmem_region *region = &ocmem->regions[i]; + u32 data; + + data = OCMEM_PSGSC_CTL_MACRO0_MODE(region->macro_state[0]) | + OCMEM_PSGSC_CTL_MACRO1_MODE(region->macro_state[1]) | + OCMEM_PSGSC_CTL_MACRO2_MODE(region->macro_state[2]) | + OCMEM_PSGSC_CTL_MACRO3_MODE(region->macro_state[3]); + + ocmem_write(ocmem, REG_OCMEM_PSGSC_CTL(i), data); + } +} + +static unsigned long phys_to_offset(struct ocmem *ocmem, + unsigned long addr) +{ + if (addr < ocmem->ocmem_mem->start || addr >= ocmem->ocmem_mem->end) + return 0; + + return addr - ocmem->ocmem_mem->start; +} + +static unsigned long device_address(struct ocmem *ocmem, + enum ocmem_client client, + unsigned long addr) +{ + /* TODO, gpu uses phys_to_offset, but others do not.. */ + return phys_to_offset(ocmem, addr); +} + +static void update_range(struct ocmem *ocmem, struct ocmem_buf *buf, + enum ocmem_macro_state mstate, enum region_mode rmode) +{ + unsigned long offset = 0; + int i, j; + + /* + * TODO probably should assert somewhere that range is aligned + * to macro boundaries.. + */ + + for (i = 0; i < ocmem->config->num_regions; i++) { + struct ocmem_region *region = &ocmem->regions[i]; + + if (buf->offset <= offset && offset < buf->offset + buf->len) + region->mode = rmode; + + for (j = 0; j < region->num_macros; j++) { + if (buf->offset <= offset && + offset < buf->offset + buf->len) + region->macro_state[j] = mstate; + + offset += region->macro_size; + } + } + + update_ocmem(ocmem); +} + +struct ocmem *of_get_ocmem(struct device *dev) +{ + struct platform_device *pdev; + struct device_node *devnode; + + devnode = of_parse_phandle(dev->of_node, "ocmem", 0); + if (!devnode) { + dev_err(dev, "Cannot look up ocmem phandle\n"); + return NULL; + } + + pdev = of_find_device_by_node(devnode); + if (!pdev) { + dev_err(dev, "Cannot find device node %s\n", devnode->name); + return NULL; + } + + return platform_get_drvdata(pdev); +} +EXPORT_SYMBOL(of_get_ocmem); + +struct ocmem_buf *ocmem_allocate(struct ocmem *ocmem, enum ocmem_client client, + unsigned long size) +{ + struct ocmem_buf *buf; + + buf = kzalloc(sizeof(*buf), GFP_KERNEL); + if (!buf) + return ERR_PTR(-ENOMEM); + + buf->offset = 0; + buf->addr = device_address(ocmem, client, buf->offset); + buf->len = size; + + update_range(ocmem, buf, CORE_ON, WIDE_MODE); + + if (qcom_scm_ocmem_lock_available()) { + int ret; + + ret = qcom_scm_ocmem_lock(QCOM_SCM_OCMEM_GRAPHICS_ID, + buf->offset, buf->len, WIDE_MODE); + if (ret) + dev_err(ocmem->dev, "could not lock: %d\n", ret); + } else { + if (client == OCMEM_GRAPHICS) { + ocmem_write(ocmem, REG_OCMEM_GFX_MPU_START, + buf->offset); + ocmem_write(ocmem, REG_OCMEM_GFX_MPU_END, + buf->offset + buf->len); + } + } + + return buf; +} +EXPORT_SYMBOL(ocmem_allocate); + +void ocmem_free(struct ocmem *ocmem, enum ocmem_client client, + struct ocmem_buf *buf) +{ + update_range(ocmem, buf, CLK_OFF, MODE_DEFAULT); + + if (qcom_scm_ocmem_lock_available()) { + int ret; + + ret = qcom_scm_ocmem_unlock(QCOM_SCM_OCMEM_GRAPHICS_ID, + buf->offset, buf->len); + if (ret) + dev_err(ocmem->dev, "could not unlock: %d\n", ret); + } else { + if (client == OCMEM_GRAPHICS) { + ocmem_write(ocmem, REG_OCMEM_GFX_MPU_START, 0x0); + ocmem_write(ocmem, REG_OCMEM_GFX_MPU_END, 0x0); + } + } + + kfree(buf); +} +EXPORT_SYMBOL(ocmem_free); + +static int ocmem_dev_probe(struct platform_device *pdev) +{ + struct ocmem *ocmem; + uint32_t reg, num_banks, region_size; + struct device *dev = &pdev->dev; + struct resource *res; + int i, j, ret; + + if (!qcom_scm_is_available()) + return -EPROBE_DEFER; + + ocmem = devm_kzalloc(dev, sizeof(*ocmem), GFP_KERNEL); + if (!ocmem) + return -ENOMEM; + + ocmem->dev = dev; + ocmem->config = device_get_match_data(dev); + + ocmem->core_clk = devm_clk_get(dev, "core"); + if (IS_ERR(ocmem->core_clk)) { + if (PTR_ERR(ocmem->core_clk) != -EPROBE_DEFER) + dev_err(dev, "Unable to get the core clock\n"); + + return PTR_ERR(ocmem->core_clk); + } + + ocmem->iface_clk = devm_clk_get(dev, "iface"); + if (IS_ERR(ocmem->iface_clk)) { + if (PTR_ERR(ocmem->iface_clk) != -EPROBE_DEFER) + dev_err(dev, "Unable to get the iface clock\n"); + + return PTR_ERR(ocmem->iface_clk); + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "ocmem_ctrl_physical"); + if (!res) { + dev_err(dev, "Could not get ocmem_ctrl_physical region\n"); + return -ENXIO; + } + + ocmem->mmio = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(ocmem->mmio)) { + dev_err(&pdev->dev, + "Failed to ioremap ocmem_ctrl_physical resource\n"); + return PTR_ERR(ocmem->mmio); + } + + ocmem->ocmem_mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "ocmem_physical"); + if (!ocmem->ocmem_mem) { + dev_err(dev, "Could not get ocmem_physical region\n"); + return -ENXIO; + } + + /* The core clock is synchronous with graphics */ + WARN_ON(clk_set_rate(ocmem->core_clk, 1000) < 0); + + ret = ocmem_clk_enable(ocmem); + if (ret) + return ret; + + if (qcom_scm_restore_sec_config_available()) { + dev_dbg(dev, "configuring scm\n"); + ret = qcom_scm_restore_sec_config(&pdev->dev, + QCOM_SCM_OCMEM_DEV_ID); + if (ret) { + dev_err(dev, "Could not enable secure configuration\n"); + goto err_clk_disable; + } + } + + reg = ocmem_read(ocmem, REG_OCMEM_HW_PROFILE); + ocmem->num_ports = FIELD(reg, OCMEM_HW_PROFILE_NUM_PORTS); + ocmem->num_macros = FIELD(reg, OCMEM_HW_PROFILE_NUM_MACROS); + ocmem->interleaved = !!(reg & OCMEM_HW_PROFILE_INTERLEAVING); + + num_banks = ocmem->num_ports / 2; + region_size = ocmem->config->macro_size * num_banks; + + dev_info(dev, "%u ports, %u regions, %u macros, %sinterleaved\n", + ocmem->num_ports, ocmem->config->num_regions, + ocmem->num_macros, ocmem->interleaved ? "" : "not "); + + ocmem->regions = devm_kcalloc(dev, ocmem->config->num_regions, + sizeof(struct ocmem_region), GFP_KERNEL); + if (!ocmem->regions) { + ret = -ENOMEM; + goto err_clk_disable; + } + + for (i = 0; i < ocmem->config->num_regions; i++) { + struct ocmem_region *region = &ocmem->regions[i]; + + if (WARN_ON(num_banks > ARRAY_SIZE(region->macro_state))) { + ret = -EINVAL; + goto err_clk_disable; + } + + region->mode = MODE_DEFAULT; + region->num_macros = num_banks; + + if (i == (ocmem->config->num_regions - 1) && + reg & OCMEM_HW_PROFILE_LAST_REGN_HALFSIZE) { + region->macro_size = ocmem->config->macro_size / 2; + region->region_size = region_size / 2; + } else { + region->macro_size = ocmem->config->macro_size; + region->region_size = region_size; + } + + for (j = 0; j < ARRAY_SIZE(region->macro_state); j++) + region->macro_state[j] = CLK_OFF; + } + + platform_set_drvdata(pdev, ocmem); + + return 0; + +err_clk_disable: + ocmem_clk_disable(ocmem); + return ret; +} + +static const struct ocmem_config ocmem_8974_config = { + .num_regions = 3, + .macro_size = SZ_128K, +}; + +static const struct of_device_id ocmem_of_match[] = { + { .compatible = "qcom,ocmem-msm8974", .data = &ocmem_8974_config }, + { } +}; + +MODULE_DEVICE_TABLE(of, ocmem_of_match); + +static struct platform_driver ocmem_driver = { + .probe = ocmem_dev_probe, + .remove = ocmem_dev_remove, + .driver = { + .name = "ocmem", + .of_match_table = ocmem_of_match, + }, +}; + +module_platform_driver(ocmem_driver); diff --git a/drivers/soc/qcom/ocmem.xml.h b/drivers/soc/qcom/ocmem.xml.h new file mode 100644 index 000000000000..b4bfb85d1e33 --- /dev/null +++ b/drivers/soc/qcom/ocmem.xml.h @@ -0,0 +1,86 @@ +/* SPDX-License-Identifier: MIT */ + +#ifndef OCMEM_XML +#define OCMEM_XML + +/* Autogenerated file, DO NOT EDIT manually! + +This file was generated by the rules-ng-ng headergen tool in this git repository: +http://github.com/freedreno/envytools/ +git clone https://github.com/freedreno/envytools.git + +The rules-ng-ng source files this header was generated from are: +- /home/robclark/src/freedreno/envytools/rnndb/adreno/ocmem.xml ( 1773 bytes, from 2015-09-24 17:30:00) + +Copyright (C) 2013-2015 by the following authors: +- Rob Clark <robdclark@gmail.com> (robclark) +*/ + +enum ocmem_macro_state { + PASSTHROUGH = 0, + PERI_ON = 1, + CORE_ON = 2, + CLK_OFF = 4, +}; + +#define REG_OCMEM_HW_VERSION 0x00000000 + +#define REG_OCMEM_HW_PROFILE 0x00000004 +#define OCMEM_HW_PROFILE_NUM_PORTS__MASK 0x0000000f +#define OCMEM_HW_PROFILE_NUM_PORTS__SHIFT 0 +static inline uint32_t OCMEM_HW_PROFILE_NUM_PORTS(uint32_t val) +{ + return ((val) << OCMEM_HW_PROFILE_NUM_PORTS__SHIFT) & OCMEM_HW_PROFILE_NUM_PORTS__MASK; +} +#define OCMEM_HW_PROFILE_NUM_MACROS__MASK 0x00003f00 +#define OCMEM_HW_PROFILE_NUM_MACROS__SHIFT 8 +static inline uint32_t OCMEM_HW_PROFILE_NUM_MACROS(uint32_t val) +{ + return ((val) << OCMEM_HW_PROFILE_NUM_MACROS__SHIFT) & OCMEM_HW_PROFILE_NUM_MACROS__MASK; +} +#define OCMEM_HW_PROFILE_LAST_REGN_HALFSIZE 0x00010000 +#define OCMEM_HW_PROFILE_INTERLEAVING 0x00020000 + +#define REG_OCMEM_GEN_STATUS 0x0000000c + +#define REG_OCMEM_PSGSC_STATUS 0x00000038 + +static inline uint32_t REG_OCMEM_PSGSC(uint32_t i0) { return 0x0000003c + 0x1*i0; } + +static inline uint32_t REG_OCMEM_PSGSC_CTL(uint32_t i0) { return 0x0000003c + 0x1*i0; } +#define OCMEM_PSGSC_CTL_MACRO0_MODE__MASK 0x00000007 +#define OCMEM_PSGSC_CTL_MACRO0_MODE__SHIFT 0 +static inline uint32_t OCMEM_PSGSC_CTL_MACRO0_MODE(enum ocmem_macro_state val) +{ + return ((val) << OCMEM_PSGSC_CTL_MACRO0_MODE__SHIFT) & OCMEM_PSGSC_CTL_MACRO0_MODE__MASK; +} +#define OCMEM_PSGSC_CTL_MACRO1_MODE__MASK 0x00000070 +#define OCMEM_PSGSC_CTL_MACRO1_MODE__SHIFT 4 +static inline uint32_t OCMEM_PSGSC_CTL_MACRO1_MODE(enum ocmem_macro_state val) +{ + return ((val) << OCMEM_PSGSC_CTL_MACRO1_MODE__SHIFT) & OCMEM_PSGSC_CTL_MACRO1_MODE__MASK; +} +#define OCMEM_PSGSC_CTL_MACRO2_MODE__MASK 0x00000700 +#define OCMEM_PSGSC_CTL_MACRO2_MODE__SHIFT 8 +static inline uint32_t OCMEM_PSGSC_CTL_MACRO2_MODE(enum ocmem_macro_state val) +{ + return ((val) << OCMEM_PSGSC_CTL_MACRO2_MODE__SHIFT) & OCMEM_PSGSC_CTL_MACRO2_MODE__MASK; +} +#define OCMEM_PSGSC_CTL_MACRO3_MODE__MASK 0x00007000 +#define OCMEM_PSGSC_CTL_MACRO3_MODE__SHIFT 12 +static inline uint32_t OCMEM_PSGSC_CTL_MACRO3_MODE(enum ocmem_macro_state val) +{ + return ((val) << OCMEM_PSGSC_CTL_MACRO3_MODE__SHIFT) & OCMEM_PSGSC_CTL_MACRO3_MODE__MASK; +} + +#define REG_OCMEM_REGION_MODE_CTL 0x00001000 +#define OCMEM_REGION_MODE_CTL_REG0_THIN 0x00000001 +#define OCMEM_REGION_MODE_CTL_REG1_THIN 0x00000002 +#define OCMEM_REGION_MODE_CTL_REG2_THIN 0x00000004 +#define OCMEM_REGION_MODE_CTL_REG3_THIN 0x00000008 + +#define REG_OCMEM_GFX_MPU_START 0x00001004 + +#define REG_OCMEM_GFX_MPU_END 0x00001008 + +#endif /* OCMEM_XML */ diff --git a/include/soc/qcom/ocmem.h b/include/soc/qcom/ocmem.h new file mode 100644 index 000000000000..e56ce220096d --- /dev/null +++ b/include/soc/qcom/ocmem.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2015 Red Hat + * Author: Rob Clark <robdclark@gmail.com> + */ + +#ifndef __OCMEM_H__ +#define __OCMEM_H__ + +enum ocmem_client { + /* GMEM clients */ + OCMEM_GRAPHICS = 0x0, + /* + * TODO add more once ocmem_allocate() is clever enough to + * deal with multiple clients. + */ + OCMEM_CLIENT_MAX, +}; + +struct ocmem; + +struct ocmem_buf { + unsigned long offset; + unsigned long addr; + unsigned long len; +}; + +struct ocmem *of_get_ocmem(struct device *dev); +struct ocmem_buf *ocmem_allocate(struct ocmem *ocmem, enum ocmem_client client, + unsigned long size); +void ocmem_free(struct ocmem *ocmem, enum ocmem_client client, + struct ocmem_buf *buf); + +#endif /* __OCMEM_H__ */