diff mbox series

[v3,09/14] dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR

Message ID 20190819101238.17335-1-niklas.cassel@linaro.org (mailing list archive)
State New, archived
Headers show
Series None | expand

Commit Message

Niklas Cassel Aug. 19, 2019, 10:12 a.m. UTC
Add qcom-opp bindings with properties needed for Core Power Reduction
(CPR).

CPR is included in a great variety of Qualcomm SoCs, e.g. msm8916 and
msm8996. CPR was first introduced in msm8974.

Co-developed-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
---
Changes since V2:
qcom,opp-fuse-level is really a required property and not an optional
property, so properly define it as such.

 .../devicetree/bindings/opp/qcom-opp.txt      | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/opp/qcom-opp.txt

Comments

Stephen Boyd Aug. 19, 2019, 5:58 p.m. UTC | #1
Quoting Niklas Cassel (2019-08-19 03:12:38)
> Add qcom-opp bindings with properties needed for Core Power Reduction
> (CPR).
> 
> CPR is included in a great variety of Qualcomm SoCs, e.g. msm8916 and
> msm8996. CPR was first introduced in msm8974.
> 
> Co-developed-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
> Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
> Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Rob Herring Aug. 23, 2019, 12:34 p.m. UTC | #2
On Mon, Aug 19, 2019 at 5:12 AM Niklas Cassel <niklas.cassel@linaro.org> wrote:
>
> Add qcom-opp bindings with properties needed for Core Power Reduction
> (CPR).
>
> CPR is included in a great variety of Qualcomm SoCs, e.g. msm8916 and
> msm8996. CPR was first introduced in msm8974.
>
> Co-developed-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
> Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
> Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
> ---
> Changes since V2:
> qcom,opp-fuse-level is really a required property and not an optional
> property, so properly define it as such.
>
>  .../devicetree/bindings/opp/qcom-opp.txt      | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/opp/qcom-opp.txt

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/opp/qcom-opp.txt b/Documentation/devicetree/bindings/opp/qcom-opp.txt
new file mode 100644
index 000000000000..32eb0793c7e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/qcom-opp.txt
@@ -0,0 +1,19 @@ 
+Qualcomm OPP bindings to describe OPP nodes
+
+The bindings are based on top of the operating-points-v2 bindings
+described in Documentation/devicetree/bindings/opp/opp.txt
+Additional properties are described below.
+
+* OPP Table Node
+
+Required properties:
+- compatible: Allow OPPs to express their compatibility. It should be:
+  "operating-points-v2-qcom-level"
+
+* OPP Node
+
+Required properties:
+- qcom,opp-fuse-level: A positive value representing the fuse corner/level
+  associated with this OPP node. Sometimes several corners/levels shares
+  a certain fuse corner/level. A fuse corner/level contains e.g. ref uV,
+  min uV, and max uV.