diff mbox series

[v2,2/5] arm64: dts: pm8004: Add SPMI regulator and add phandles to lsids

Message ID 20191031111645.34777-3-kholk11@gmail.com (mailing list archive)
State New, archived
Headers show
Series MSM8976/56 Sony Xperia Loire (X/XCompact) smartphones | expand

Commit Message

AngeloGioacchino Del Regno Oct. 31, 2019, 11:16 a.m. UTC 
From: AngeloGioacchino Del Regno <kholk11@gmail.com>

Add the SPMI regulator node in the PM8004 LSID5 (as there is where
it resides basically 99% of the times) and set the nodes to be
disabled by default, as not all boards have both or one of the
lsids specified in this generic pm8004 DT.

While at it, also add nice phandles to the lsids specified in this
DT to allow configuration in specific board dts in a more human
readable fashion.

Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
---
 arch/arm64/boot/dts/qcom/pm8004.dtsi | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pm8004.dtsi b/arch/arm64/boot/dts/qcom/pm8004.dtsi
index 297b57bfa87a..0abd1abe12fc 100644
--- a/arch/arm64/boot/dts/qcom/pm8004.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8004.dtsi
@@ -4,17 +4,23 @@ 
 
 &spmi_bus {
 
-	pmic@4 {
+	pm8004_lsid4: pmic@4 {
 		compatible = "qcom,pm8004", "qcom,spmi-pmic";
 		reg = <0x4 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		status = "disabled";
 	};
 
-	pmic@5 {
+	pm8004_lsid5: pmic@5 {
 		compatible = "qcom,pm8004", "qcom,spmi-pmic";
 		reg = <0x5 SPMI_USID>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		status = "disabled";
+
+		pm8004_spmi_regulators: regulators {
+			compatible = "qcom,pm8004-regulators";
+		};
 	};
 };