diff mbox series

[v2,2/9] drm/bridge: ti-sn65dsi86: zero is never greater than an unsigned int

Message ID 20191217164702.v2.2.Id445d0057bedcb0a190009e0706e9254c2fd48eb@changeid (mailing list archive)
State Superseded
Headers show
Series drm/bridge: ti-sn65dsi86: Improve support for AUO B116XAK01 + other DP | expand

Commit Message

Doug Anderson Dec. 18, 2019, 12:47 a.m. UTC 
When we iterate over ti_sn_bridge_dp_rate_lut, there's no reason to
start at index 0 which always contains the value 0.  0 is not a valid
link rate.

This change should have no real effect but is a small cleanup.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
---

Changes in v2: None

 drivers/gpu/drm/bridge/ti-sn65dsi86.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
index 2fb9370a76e6..7b596af265e4 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
@@ -458,7 +458,7 @@  static void ti_sn_bridge_set_dp_rate(struct ti_sn_bridge *pdata)
 	/* set DP data rate */
 	dp_rate_mhz = ((bit_rate_mhz / pdata->dsi->lanes) * DP_CLK_FUDGE_NUM) /
 							DP_CLK_FUDGE_DEN;
-	for (i = 0; i < ARRAY_SIZE(ti_sn_bridge_dp_rate_lut) - 1; i++)
+	for (i = 1; i < ARRAY_SIZE(ti_sn_bridge_dp_rate_lut) - 1; i++)
 		if (ti_sn_bridge_dp_rate_lut[i] > dp_rate_mhz)
 			break;