Message ID | 20191218143416.v3.1.Icb765d5799e9651e5249c0c27627ba33a9e411cf@changeid (mailing list archive) |
---|---|
State | Accepted |
Commit | ca1b885cbe9e03bb1464426784bda3a51a598eba |
Headers | show |
Series | drm/bridge: ti-sn65dsi86: Improve support for AUO B116XAK01 + other DP | expand |
On Wed 18 Dec 14:35 PST 2019, Douglas Anderson wrote: > These two things were in one function. Split into two. This looks > like it's duplicating some code, but don't worry. This is is just in > preparation for future changes. > > This is intended to have zero functional change and will just make > future patches easier to understand. > > Signed-off-by: Douglas Anderson <dianders@chromium.org> > Tested-by: Rob Clark <robdclark@gmail.com> > Reviewed-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > --- > > Changes in v3: None > Changes in v2: None > > drivers/gpu/drm/bridge/ti-sn65dsi86.c | 33 +++++++++++++++++++-------- > 1 file changed, 23 insertions(+), 10 deletions(-) > > diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c > index 43abf01ebd4c..2fb9370a76e6 100644 > --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c > +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c > @@ -417,6 +417,24 @@ static void ti_sn_bridge_set_refclk_freq(struct ti_sn_bridge *pdata) > REFCLK_FREQ(i)); > } > > +static void ti_sn_bridge_set_dsi_rate(struct ti_sn_bridge *pdata) > +{ > + unsigned int bit_rate_mhz, clk_freq_mhz; > + unsigned int val; > + struct drm_display_mode *mode = > + &pdata->bridge.encoder->crtc->state->adjusted_mode; > + > + /* set DSIA clk frequency */ > + bit_rate_mhz = (mode->clock / 1000) * > + mipi_dsi_pixel_format_to_bpp(pdata->dsi->format); > + clk_freq_mhz = bit_rate_mhz / (pdata->dsi->lanes * 2); > + > + /* for each increment in val, frequency increases by 5MHz */ > + val = (MIN_DSI_CLK_FREQ_MHZ / 5) + > + (((clk_freq_mhz - MIN_DSI_CLK_FREQ_MHZ) / 5) & 0xFF); > + regmap_write(pdata->regmap, SN_DSIA_CLK_FREQ_REG, val); > +} > + > /** > * LUT index corresponds to register value and > * LUT values corresponds to dp data rate supported > @@ -426,22 +444,16 @@ static const unsigned int ti_sn_bridge_dp_rate_lut[] = { > 0, 1620, 2160, 2430, 2700, 3240, 4320, 5400 > }; > > -static void ti_sn_bridge_set_dsi_dp_rate(struct ti_sn_bridge *pdata) > +static void ti_sn_bridge_set_dp_rate(struct ti_sn_bridge *pdata) > { > - unsigned int bit_rate_mhz, clk_freq_mhz, dp_rate_mhz; > - unsigned int val, i; > + unsigned int bit_rate_mhz, dp_rate_mhz; > + unsigned int i; > struct drm_display_mode *mode = > &pdata->bridge.encoder->crtc->state->adjusted_mode; > > /* set DSIA clk frequency */ > bit_rate_mhz = (mode->clock / 1000) * > mipi_dsi_pixel_format_to_bpp(pdata->dsi->format); > - clk_freq_mhz = bit_rate_mhz / (pdata->dsi->lanes * 2); > - > - /* for each increment in val, frequency increases by 5MHz */ > - val = (MIN_DSI_CLK_FREQ_MHZ / 5) + > - (((clk_freq_mhz - MIN_DSI_CLK_FREQ_MHZ) / 5) & 0xFF); > - regmap_write(pdata->regmap, SN_DSIA_CLK_FREQ_REG, val); > > /* set DP data rate */ > dp_rate_mhz = ((bit_rate_mhz / pdata->dsi->lanes) * DP_CLK_FUDGE_NUM) / > @@ -510,7 +522,8 @@ static void ti_sn_bridge_enable(struct drm_bridge *bridge) > val); > > /* set dsi/dp clk frequency value */ > - ti_sn_bridge_set_dsi_dp_rate(pdata); > + ti_sn_bridge_set_dsi_rate(pdata); > + ti_sn_bridge_set_dp_rate(pdata); > > /* enable DP PLL */ > regmap_write(pdata->regmap, SN_PLL_ENABLE_REG, 1); > -- > 2.24.1.735.g03f4e72817-goog >
diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c index 43abf01ebd4c..2fb9370a76e6 100644 --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c @@ -417,6 +417,24 @@ static void ti_sn_bridge_set_refclk_freq(struct ti_sn_bridge *pdata) REFCLK_FREQ(i)); } +static void ti_sn_bridge_set_dsi_rate(struct ti_sn_bridge *pdata) +{ + unsigned int bit_rate_mhz, clk_freq_mhz; + unsigned int val; + struct drm_display_mode *mode = + &pdata->bridge.encoder->crtc->state->adjusted_mode; + + /* set DSIA clk frequency */ + bit_rate_mhz = (mode->clock / 1000) * + mipi_dsi_pixel_format_to_bpp(pdata->dsi->format); + clk_freq_mhz = bit_rate_mhz / (pdata->dsi->lanes * 2); + + /* for each increment in val, frequency increases by 5MHz */ + val = (MIN_DSI_CLK_FREQ_MHZ / 5) + + (((clk_freq_mhz - MIN_DSI_CLK_FREQ_MHZ) / 5) & 0xFF); + regmap_write(pdata->regmap, SN_DSIA_CLK_FREQ_REG, val); +} + /** * LUT index corresponds to register value and * LUT values corresponds to dp data rate supported @@ -426,22 +444,16 @@ static const unsigned int ti_sn_bridge_dp_rate_lut[] = { 0, 1620, 2160, 2430, 2700, 3240, 4320, 5400 }; -static void ti_sn_bridge_set_dsi_dp_rate(struct ti_sn_bridge *pdata) +static void ti_sn_bridge_set_dp_rate(struct ti_sn_bridge *pdata) { - unsigned int bit_rate_mhz, clk_freq_mhz, dp_rate_mhz; - unsigned int val, i; + unsigned int bit_rate_mhz, dp_rate_mhz; + unsigned int i; struct drm_display_mode *mode = &pdata->bridge.encoder->crtc->state->adjusted_mode; /* set DSIA clk frequency */ bit_rate_mhz = (mode->clock / 1000) * mipi_dsi_pixel_format_to_bpp(pdata->dsi->format); - clk_freq_mhz = bit_rate_mhz / (pdata->dsi->lanes * 2); - - /* for each increment in val, frequency increases by 5MHz */ - val = (MIN_DSI_CLK_FREQ_MHZ / 5) + - (((clk_freq_mhz - MIN_DSI_CLK_FREQ_MHZ) / 5) & 0xFF); - regmap_write(pdata->regmap, SN_DSIA_CLK_FREQ_REG, val); /* set DP data rate */ dp_rate_mhz = ((bit_rate_mhz / pdata->dsi->lanes) * DP_CLK_FUDGE_NUM) / @@ -510,7 +522,8 @@ static void ti_sn_bridge_enable(struct drm_bridge *bridge) val); /* set dsi/dp clk frequency value */ - ti_sn_bridge_set_dsi_dp_rate(pdata); + ti_sn_bridge_set_dsi_rate(pdata); + ti_sn_bridge_set_dp_rate(pdata); /* enable DP PLL */ regmap_write(pdata->regmap, SN_PLL_ENABLE_REG, 1);