diff mbox series

[1/1] ARM: dts: qcom: msm8974-honami: Add USB node.

Message ID 20200118165518.36036-1-konradybcio@gmail.com (mailing list archive)
State Accepted
Commit bcd3a145b1606a76058554b6a75da569d7762322
Headers show
Series [1/1] ARM: dts: qcom: msm8974-honami: Add USB node. | expand

Commit Message

Konrad Dybcio Jan. 18, 2020, 4:55 p.m. UTC
This exact node has been included in Amami DTS
ever since 2017, turns out it works perfectly
fine with Honami, as tested with postmarketOS.

Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
---
 .../dts/qcom-msm8974-sony-xperia-honami.dts   | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
index 450b8321e0a6..611bae9fe66b 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -260,6 +260,31 @@  l24 {
 };
 
 &soc {
+	usb@f9a55000 {
+		status = "ok";
+
+		phys = <&usb_hs1_phy>;
+		phy-select = <&tcsr 0xb000 0>;
+		extcon = <&smbb>, <&usb_id>;
+		vbus-supply = <&chg_otg>;
+
+		hnp-disable;
+		srp-disable;
+		adp-disable;
+
+		ulpi {
+			phy@a {
+				status = "ok";
+
+				v1p8-supply = <&pm8941_l6>;
+				v3p3-supply = <&pm8941_l24>;
+
+				extcon = <&smbb>;
+				qcom,init-seq = /bits/ 8 <0x1 0x64>;
+			};
+		};
+	};
+
 	sdhci@f9824900 {
 		status = "ok";