@@ -2933,6 +2933,18 @@ opp-200000000 {
dispcc: clock-controller@af00000 {
compatible = "qcom,sdm845-dispcc";
reg = <0 0x0af00000 0 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+ <&dsi0_phy 0>,
+ <&dsi0_phy 1>,
+ <&dsi1_phy 0>,
+ <&dsi1_phy 1>,
+ <0>,
+ <0>;
+ clock-names = "xo", "gpll0",
+ "dsi0_phy_pll_byte", "dsi0_phy_pll_pixel",
+ "dsi1_phy_pll_byte", "dsi1_phy_pll_pixel",
+ "dp_phy_pll_link", "dp_phy_pll_vco_div";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
We're transitioning over to requiring the Qualcomm Display Clock Controller to specify all the input clocks. Let's add them for sdm845. NOTES: - Until the Linux driver for sdm845's dispcc is updated, these clocks will not actually be used in Linux. It will continue to use global clock names to match things up. - Although the clocks from the DP PHY are required, the DP PHY isn't represented in the dts yet. Apparently the magic for this is just to use <0>. Signed-off-by: Douglas Anderson <dianders@chromium.org> --- Changes in v2: - Patch ("arm64: dts: qcom: sdm845: Add...dispcc") new for v2. arch/arm64/boot/dts/qcom/sdm845.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+)