| Message ID | 20200323050316.32108-2-harigovi@codeaurora.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add support for rm69299 Visionox panel driver and add devicetree bindings for visionox panel | expand |
On Mon, Mar 23, 2020 at 10:33:15AM +0530, Harigovindan P wrote: > Add bindings for visionox rm69299 panel. > > Signed-off-by: Harigovindan P <harigovi@codeaurora.org> > --- > > Changes in v2: > - Removed unwanted properties from description. > - Creating source files without execute permissions(Rob Herring). > Changes in v3: > - Changing txt file into yaml > Changes in v4: > - Updating license identifier. > - Moving yaml file inside panel directory. > - Removing pinctrl entries. > - Adding documentation for reset-gpios. > Changes in v5: > - No changes. Updated 2/2 Patch. > Changes in v6: > - Removing patternProperties. > - Added " |" after description. > - Setting port and reset-gpios to true. > - Removing @ae94000 for dsi node. > Changes in v7: > - Added reg property. > Changes in v8: > - Rearranged additionalProperties. > - Dropping improper reg property. > Changes in v9: > - Adding additionalProperties at the same level as > 'properties' > - Adding properties for "ports" which includes: > -> #address-cells > -> #size-cells > -> port@0 > > .../display/panel/visionox,rm69299.yaml | 82 +++++++++++++++++++ > 1 file changed, 82 insertions(+) > create mode 100755 Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml Wrong file mode. > > diff --git a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml > new file mode 100755 > index 000000000000..2dd4d9471fa8 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml > @@ -0,0 +1,82 @@ > +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/panel/visionox,rm69299.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Visionox model RM69299 Panels Device Tree Bindings. > + > +maintainers: > + - Harigovindan P <harigovi@codeaurora.org> > + > +description: | > + This binding is for display panels using a Visionox RM692999 panel. > + > +allOf: > + - $ref: panel-common.yaml# > + > +properties: > + compatible: > + const: visionox,rm69299-1080p-display > + > + reg: > + maxItems: 1 > + > + vdda-supply: > + description: | > + Phandle of the regulator that provides the vdda supply voltage. > + > + vdd3p3-supply: > + description: | > + Phandle of the regulator that provides the vdd3p3 supply voltage. > + > + ports: > + type: object > + description: | > + A ports node with endpoint definitions as defined in > + Documentation/devicetree/bindings/media/video-interfaces.txt. > + > + properties: > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > + port@0: As I said before, fix the example. You don't need 'ports' nor a unit address as there is only 1 port. All you need instead of 'ports' is 'port: true' because panel-common.yaml defines it. And 'port' should be required. > + type: object > + description: | > + Input endpoints of the controller. > + > + reset-gpios: true > + > + additionalProperties: false You are defining a property called 'additionalProperties'. Remove the indentation. > + > +required: > + - compatible > + - vdda-supply > + - vdd3p3-supply > + - reset-gpios > + > +examples: > + - | > + panel { > + compatible = "visionox,rm69299-1080p-display"; > + > + vdda-supply = <&src_pp1800_l8c>; > + vdd3p3-supply = <&src_pp2800_l18a>; > + > + reset-gpios = <&pm6150l_gpio 3 0>; > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + port@0 { > + reg = <0>; > + panel0_in: endpoint { > + remote-endpoint = <&dsi0_out>; > + }; > + }; > + }; > + }; > +... > + > -- > 2.25.1 >
diff --git a/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml new file mode 100755 index 000000000000..2dd4d9471fa8 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/visionox,rm69299.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Visionox model RM69299 Panels Device Tree Bindings. + +maintainers: + - Harigovindan P <harigovi@codeaurora.org> + +description: | + This binding is for display panels using a Visionox RM692999 panel. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: visionox,rm69299-1080p-display + + reg: + maxItems: 1 + + vdda-supply: + description: | + Phandle of the regulator that provides the vdda supply voltage. + + vdd3p3-supply: + description: | + Phandle of the regulator that provides the vdd3p3 supply voltage. + + ports: + type: object + description: | + A ports node with endpoint definitions as defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + port@0: + type: object + description: | + Input endpoints of the controller. + + reset-gpios: true + + additionalProperties: false + +required: + - compatible + - vdda-supply + - vdd3p3-supply + - reset-gpios + +examples: + - | + panel { + compatible = "visionox,rm69299-1080p-display"; + + vdda-supply = <&src_pp1800_l8c>; + vdd3p3-supply = <&src_pp2800_l18a>; + + reset-gpios = <&pm6150l_gpio 3 0>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + panel0_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; +... +
Add bindings for visionox rm69299 panel. Signed-off-by: Harigovindan P <harigovi@codeaurora.org> --- Changes in v2: - Removed unwanted properties from description. - Creating source files without execute permissions(Rob Herring). Changes in v3: - Changing txt file into yaml Changes in v4: - Updating license identifier. - Moving yaml file inside panel directory. - Removing pinctrl entries. - Adding documentation for reset-gpios. Changes in v5: - No changes. Updated 2/2 Patch. Changes in v6: - Removing patternProperties. - Added " |" after description. - Setting port and reset-gpios to true. - Removing @ae94000 for dsi node. Changes in v7: - Added reg property. Changes in v8: - Rearranged additionalProperties. - Dropping improper reg property. Changes in v9: - Adding additionalProperties at the same level as 'properties' - Adding properties for "ports" which includes: -> #address-cells -> #size-cells -> port@0 .../display/panel/visionox,rm69299.yaml | 82 +++++++++++++++++++ 1 file changed, 82 insertions(+) create mode 100755 Documentation/devicetree/bindings/display/panel/visionox,rm69299.yaml