@@ -26,6 +26,7 @@ Regulator nodes are identified by their compatible:
"qcom,rpm-pm8994-regulators"
"qcom,rpm-pm8998-regulators"
"qcom,rpm-pma8084-regulators"
+ "qcom,rpm-pmi8994-regulators"
"qcom,rpm-pmi8998-regulators"
"qcom,rpm-pms405-regulators"
@@ -143,6 +144,15 @@ Regulator nodes are identified by their compatible:
Definition: reference to regulator supplying the input pin, as
described in the data sheet
+- vdd_s1-supply:
+- vdd_s2-supply:
+- vdd_s3-supply:
+- vdd_bst_byp-supply:
+ Usage: optional (pmi8994 only)
+ Value type: <phandle>
+ Definition: reference to regulator supplying the input pin, as
+ described in the data sheet
+
- vdd_s1-supply:
- vdd_s2-supply:
- vdd_s3-supply:
@@ -259,6 +269,9 @@ pma8084:
l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20,
l21, l22, l23, l24, l25, l26, l27, lvs1, lvs2, lvs3, lvs4, 5vs1
+pmi8994:
+ s1, s2, s3, boost-bypass
+
pmi8998:
bob
@@ -445,6 +445,44 @@ static const struct regulator_desc pm8994_lnldo = {
.ops = &rpm_smps_ldo_ops_fixed,
};
+static const struct regulator_desc pmi8994_ftsmps = {
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE(350000, 0, 199, 5000),
+ REGULATOR_LINEAR_RANGE(700000, 200, 349, 10000),
+ },
+ .n_linear_ranges = 2,
+ .n_voltages = 350,
+ .ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pmi8994_hfsmps = {
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE(350000, 0, 80, 12500),
+ REGULATOR_LINEAR_RANGE(700000, 81, 141, 25000),
+ },
+ .n_linear_ranges = 2,
+ .n_voltages = 142,
+ .ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pmi8994_bby = {
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE(3000000, 0, 44, 50000),
+ },
+ .n_linear_ranges = 1,
+ .n_voltages = 45,
+ .ops = &rpm_bob_ops,
+};
+
+static const struct regulator_desc pmi8994_boost = {
+ .linear_ranges = (struct regulator_linear_range[]) {
+ REGULATOR_LINEAR_RANGE(4000000, 0, 30, 50000),
+ },
+ .n_linear_ranges = 1,
+ .n_voltages = 31,
+ .ops = &rpm_smps_ldo_ops,
+};
+
static const struct regulator_desc pm8998_ftsmps = {
.linear_ranges = (struct regulator_linear_range[]) {
REGULATOR_LINEAR_RANGE(320000, 0, 258, 4000),
@@ -780,6 +818,14 @@ static const struct rpm_regulator_data rpm_pm8994_regulators[] = {
{}
};
+static const struct rpm_regulator_data rpm_pmi8994_regulators[] = {
+ { "s1", QCOM_SMD_RPM_SMPB, 1, &pmi8994_ftsmps, "vdd_s1" },
+ { "s2", QCOM_SMD_RPM_SMPB, 2, &pmi8994_hfsmps, "vdd_s2" },
+ { "s2", QCOM_SMD_RPM_SMPB, 3, &pmi8994_hfsmps, "vdd_s3" },
+ { "boost-bypass", QCOM_SMD_RPM_BBYB, 1, &pmi8994_bby, "vdd_bst_byp" },
+ {}
+};
+
static const struct rpm_regulator_data rpm_pm8998_regulators[] = {
{ "s1", QCOM_SMD_RPM_SMPA, 1, &pm8998_ftsmps, "vdd_s1" },
{ "s2", QCOM_SMD_RPM_SMPA, 2, &pm8998_ftsmps, "vdd_s2" },
@@ -862,6 +908,7 @@ static const struct of_device_id rpm_of_match[] = {
{ .compatible = "qcom,rpm-pm8994-regulators", .data = &rpm_pm8994_regulators },
{ .compatible = "qcom,rpm-pm8998-regulators", .data = &rpm_pm8998_regulators },
{ .compatible = "qcom,rpm-pma8084-regulators", .data = &rpm_pma8084_regulators },
+ { .compatible = "qcom,rpm-pmi8994-regulators", .data = &rpm_pmi8994_regulators },
{ .compatible = "qcom,rpm-pmi8998-regulators", .data = &rpm_pmi8998_regulators },
{ .compatible = "qcom,rpm-pms405-regulators", .data = &rpm_pms405_regulators },
{}
@@ -10,6 +10,7 @@ struct qcom_smd_rpm;
/*
* Constants used for addressing resources in the RPM.
*/
+#define QCOM_SMD_RPM_BBYB 0x62796262
#define QCOM_SMD_RPM_BOBB 0x62626f62
#define QCOM_SMD_RPM_BOOST 0x61747362
#define QCOM_SMD_RPM_BUS_CLK 0x316b6c63
The pmi8994 is commonly found on MSM8996 based devices, such as the Dragonboard 820c, where it supplies power to a number of LDOs on the primary PMIC. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- .../regulator/qcom,smd-rpm-regulator.txt | 13 +++++ drivers/regulator/qcom_smd-regulator.c | 47 +++++++++++++++++++ include/linux/soc/qcom/smd-rpm.h | 1 + 3 files changed, 61 insertions(+)