diff mbox series

[v1] arm64: dts: qcom: apq8016-sbc-d3: Add Qualcomm APQ8016 SBC + D3 mezzanine

Message ID 20200422111014.616233-1-robert.foss@linaro.org (mailing list archive)
State New, archived
Headers show
Series [v1] arm64: dts: qcom: apq8016-sbc-d3: Add Qualcomm APQ8016 SBC + D3 mezzanine | expand

Commit Message

Robert Foss April 22, 2020, 11:10 a.m. UTC
Add device treee support for the Qualcomm APQ8016 SBC, otherwise known as
the Dragonboard 410c with the D3 mezzanine expansion board.

The D3 mezzanine ships in a kit with a OmniVision 5640 sensor module,
which is what this DT targets.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
 arch/arm64/boot/dts/qcom/Makefile           |  1 +
 arch/arm64/boot/dts/qcom/apq8016-sbc-d3.dts | 45 +++++++++++++++++++++
 2 files changed, 46 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/apq8016-sbc-d3.dts

Comments

Vinod Koul May 14, 2020, 5:22 p.m. UTC | #1
On 22-04-20, 13:10, Robert Foss wrote:
> Add device treee support for the Qualcomm APQ8016 SBC, otherwise known as
> the Dragonboard 410c with the D3 mezzanine expansion board.
> 
> The D3 mezzanine ships in a kit with a OmniVision 5640 sensor module,
> which is what this DT targets.
> 
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/Makefile           |  1 +
>  arch/arm64/boot/dts/qcom/apq8016-sbc-d3.dts | 45 +++++++++++++++++++++
>  2 files changed, 46 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/apq8016-sbc-d3.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index cc103f7020fd..025362471929 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -1,5 +1,6 @@
>  # SPDX-License-Identifier: GPL-2.0
>  dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc-d3.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
>  dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
> diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-d3.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc-d3.dts
> new file mode 100644
> index 000000000000..1b85adeeada1
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-d3.dts
> @@ -0,0 +1,45 @@
> +// SPDX-License-Identifier: GPL-2.0-only

Dual BSD + GPL please

> +/*
> + * Copyright (c) 2015, The Linux Foundation. All rights reserved.

we are in 2020 now :)

> + */
> +
> +/dts-v1/;
> +
> +#include "apq8016-sbc.dtsi"
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. APQ 8016 SBC w/ D3 Mezzanine";
> +	compatible = "qcom,apq8016-sbc", "qcom,apq8016", "qcom,sbc";
> +};
> +
> +&cci_i2c0 {
> +	/delete-node/ camera_rear@3b;
> +
> +	camera_rear@76 {
> +		compatible = "ovti,ov5640";
> +		reg = <0x76>;
> +
> +		enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>;
> +		reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&camera_rear_default>;
> +
> +		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
> +		clock-names = "xclk";
> +		clock-frequency = <23880000>;
> +
> +		vdddo-supply = <&camera_vdddo_1v8>;
> +		vdda-supply = <&camera_vdda_2v8>;
> +		vddd-supply = <&camera_vddd_1v5>;
> +
> +		status = "ok";
> +
> +		port {
> +			ov5640_ep: endpoint {
> +				clock-lanes = <1>;
> +				data-lanes = <0 2>;
> +				remote-endpoint = <&csiphy0_ep>;
> +			};
> +		};
> +	};
> +};
> -- 
> 2.25.1
Robert Foss May 15, 2020, 8:31 a.m. UTC | #2
On Thu, 14 May 2020 at 19:22, Vinod Koul <vkoul@kernel.org> wrote:
>
> On 22-04-20, 13:10, Robert Foss wrote:
> > Add device treee support for the Qualcomm APQ8016 SBC, otherwise known as
> > the Dragonboard 410c with the D3 mezzanine expansion board.
> >
> > The D3 mezzanine ships in a kit with a OmniVision 5640 sensor module,
> > which is what this DT targets.
> >
> > Signed-off-by: Robert Foss <robert.foss@linaro.org>
> > ---
> >  arch/arm64/boot/dts/qcom/Makefile           |  1 +
> >  arch/arm64/boot/dts/qcom/apq8016-sbc-d3.dts | 45 +++++++++++++++++++++
> >  2 files changed, 46 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/qcom/apq8016-sbc-d3.dts
> >
> > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> > index cc103f7020fd..025362471929 100644
> > --- a/arch/arm64/boot/dts/qcom/Makefile
> > +++ b/arch/arm64/boot/dts/qcom/Makefile
> > @@ -1,5 +1,6 @@
> >  # SPDX-License-Identifier: GPL-2.0
> >  dtb-$(CONFIG_ARCH_QCOM)      += apq8016-sbc.dtb
> > +dtb-$(CONFIG_ARCH_QCOM)      += apq8016-sbc-d3.dtb
> >  dtb-$(CONFIG_ARCH_QCOM)      += apq8096-db820c.dtb
> >  dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
> >  dtb-$(CONFIG_ARCH_QCOM)      += ipq6018-cp01-c1.dtb
> > diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-d3.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc-d3.dts
> > new file mode 100644
> > index 000000000000..1b85adeeada1
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-d3.dts
> > @@ -0,0 +1,45 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
>
> Dual BSD + GPL please

Thanks.

>
> > +/*
> > + * Copyright (c) 2015, The Linux Foundation. All rights reserved.
>
> we are in 2020 now :)

Maybe I should fix that.
I'll change the name of the d3 mezzanine to d3camera as well.

>
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "apq8016-sbc.dtsi"
> > +
> > +/ {
> > +     model = "Qualcomm Technologies, Inc. APQ 8016 SBC w/ D3 Mezzanine";
> > +     compatible = "qcom,apq8016-sbc", "qcom,apq8016", "qcom,sbc";
> > +};
> > +
> > +&cci_i2c0 {
> > +     /delete-node/ camera_rear@3b;
> > +
> > +     camera_rear@76 {
> > +             compatible = "ovti,ov5640";
> > +             reg = <0x76>;
> > +
> > +             enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>;
> > +             reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
> > +             pinctrl-names = "default";
> > +             pinctrl-0 = <&camera_rear_default>;
> > +
> > +             clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
> > +             clock-names = "xclk";
> > +             clock-frequency = <23880000>;
> > +
> > +             vdddo-supply = <&camera_vdddo_1v8>;
> > +             vdda-supply = <&camera_vdda_2v8>;
> > +             vddd-supply = <&camera_vddd_1v5>;
> > +
> > +             status = "ok";
> > +
> > +             port {
> > +                     ov5640_ep: endpoint {
> > +                             clock-lanes = <1>;
> > +                             data-lanes = <0 2>;
> > +                             remote-endpoint = <&csiphy0_ep>;
> > +                     };
> > +             };
> > +     };
> > +};
> > --
> > 2.25.1
>
> --
> ~Vinod
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index cc103f7020fd..025362471929 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -1,5 +1,6 @@ 
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc-d3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
 dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq6018-cp01-c1.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-d3.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc-d3.dts
new file mode 100644
index 000000000000..1b85adeeada1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-d3.dts
@@ -0,0 +1,45 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "apq8016-sbc.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. APQ 8016 SBC w/ D3 Mezzanine";
+	compatible = "qcom,apq8016-sbc", "qcom,apq8016", "qcom,sbc";
+};
+
+&cci_i2c0 {
+	/delete-node/ camera_rear@3b;
+
+	camera_rear@76 {
+		compatible = "ovti,ov5640";
+		reg = <0x76>;
+
+		enable-gpios = <&msmgpio 34 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&camera_rear_default>;
+
+		clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
+		clock-names = "xclk";
+		clock-frequency = <23880000>;
+
+		vdddo-supply = <&camera_vdddo_1v8>;
+		vdda-supply = <&camera_vdda_2v8>;
+		vddd-supply = <&camera_vddd_1v5>;
+
+		status = "ok";
+
+		port {
+			ov5640_ep: endpoint {
+				clock-lanes = <1>;
+				data-lanes = <0 2>;
+				remote-endpoint = <&csiphy0_ep>;
+			};
+		};
+	};
+};