diff mbox series

[4/4] arm64: dts: qcom: msm8916-samsung-a5u: Add touchscreen

Message ID 20200426140642.204395-5-stephan@gerhold.net (mailing list archive)
State New, archived
Headers show
Series [1/4] arm64: dts: qcom: msm8916: Add blsp_i2c1 | expand

Commit Message

Stephan Gerhold April 26, 2020, 2:06 p.m. UTC 
A5U uses a Melfas MMS345L touchscreen that is connected to
blsp_i2c5. Add it to the device tree.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
Note: For the touchscreen to work this patch depends on
https://lore.kernel.org/linux-input/20200423102431.2715-1-stephan@gerhold.net/
which was just applied to linux-next.
---
 .../boot/dts/qcom/msm8916-samsung-a5u-eur.dts | 35 +++++++++++++++++++
 1 file changed, 35 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
index 6629a621139c..295a0f969914 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts
@@ -9,8 +9,43 @@  / {
 	compatible = "samsung,a5u-eur", "qcom,msm8916";
 };
 
+&blsp_i2c5 {
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "melfas,mms345l";
+
+		reg = <0x48>;
+		interrupt-parent = <&msmgpio>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+
+		avdd-supply = <&reg_vdd_tsp>;
+		vdd-supply = <&pm8916_l6>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ts_int_default>;
+	};
+};
+
 &pronto {
 	iris {
 		compatible = "qcom,wcn3680";
 	};
 };
+
+&msmgpio {
+	ts_int_default: ts_int_default {
+		pinmux {
+			function = "gpio";
+			pins = "gpio13";
+		};
+		pinconf {
+			pins = "gpio13";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+};